ZOLTRIX, INC. ============= FM-336FI Card Type Modem (asynchronous) Chipset Rockwell Maximum Data Rate 33.6Kbps Maximum Fax Rate 14.4Kbps Data Modulation Bell 103A, 212A ITU-T V.21, V.22, V.22bis, V.23, V.32, V.32bis, V.34 Rockwell V.FC Fax Modulation ITU-T V.17, V.21CH2, V.27ter, V.29 Error MNP5, V.42, V.42bis Correction/Compression Fax Class Class I Data Bus 16-bit ISA Card Size Full height, half length +------------------------------------------------------------+ | CONNECTIONS | |------------------------------------------------------------| | Function | Label | Function | Label | |----------------------+-------+---------------------+-------| | Telephone line out | CN1 | Telephone line in | CN2 | +------------------------------------------------------------+ +----------------------------------------------------------------------+ | INTERRUPT SELECTION | |----------------------------------------------------------------------| |Setting|SW1/A |SW1/B |SW1/C |SW1/D |SW1/E |SW1/F |SW1/G |SW1/H |SW1/I | |-------+------+------+------+------+------+------+------+------+------| | 2/9 | Open | Open | Open | Open |Closed| Open | Open | Open | Open | |-------+------+------+------+------+------+------+------+------+------| | 3 | Open | Open | Open | Open | Open | Open | Open | Open |Closed| |-------+------+------+------+------+------+------+------+------+------| | 4 | Open | Open | Open | Open | Open | Open | Open |Closed| Open | |-------+------+------+------+------+------+------+------+------+------| | 5 | Open | Open | Open | Open | Open | Open |Closed| Open | Open | |-------+------+------+------+------+------+------+------+------+------| | 7 | Open | Open | Open | Open | Open |Closed| Open | Open | Open | |-------+------+------+------+------+------+------+------+------+------| | 10 | Open | Open | Open |Closed| Open | Open | Open | Open | Open | |-------+------+------+------+------+------+------+------+------+------| | 11 | Open | Open |Closed| Open | Open | Open | Open | Open | Open | |-------+------+------+------+------+------+------+------+------+------| | 12 | Open |Closed| Open | Open | Open | Open | Open | Open | Open | |-------+------+------+------+------+------+------+------+------+------| | 15 |Closed| Open | Open | Open | Open | Open | Open | Open | Open | +----------------------------------------------------------------------+ +------------------------------------------------------------+ | SERIAL PORT ADDRESS SELECTION | |------------------------------------------------------------| | Setting | SW2 | |----------------------------+-------------------------------| | 3F8h (COM1:) | Pins 1 & 2, 3 & 4 closed | |----------------------------+-------------------------------| | 2F8h (COM2:) | Pins 3 & 4 closed | |----------------------------+-------------------------------| | 3E8h (COM3:) | Pins 1 & 2 closed | |----------------------------+-------------------------------| | 2E8h (COM4:) | Open | +------------------------------------------------------------+ +------------------------------------------------------------+ | SUPPORTED STANDARD COMMANDS | |------------------------------------------------------------| | Basic AT Commands | |------------------------------------------------------------| | +++, 'comma', A/ | |------------------------------------------------------------| | A, B, E, H, L, M, N, O, P, Q, T, V, W, X, Y, Z | |------------------------------------------------------------| | &C, &D, &F, &G, &K, &P, &Q, &R, &S, &T, &V, &W, &Y, &Z | |------------------------------------------------------------| | Extended AT Commands | |------------------------------------------------------------| | \A, \B, \K, \N | |------------------------------------------------------------| | %C, %E, %L, %Q | |------------------------------------------------------------| | Special AT Commands | |------------------------------------------------------------| | +MS | |------------------------------------------------------------| | S-Registers | |------------------------------------------------------------| | S0, S1, S2, S3, S4, S5, S6, S7, S8, S9, S10, S11, S12, | | S14, S16, S18, S21, S22, S23, S25, S26 | |------------------------------------------------------------| | S27, S29, S30, S31, S32, S33, S36, S38, S46, S48, S82, | | S86, S95 | |------------------------------------------------------------| | Note: See MHI help file for complete information. | +------------------------------------------------------------+ +------------------------------------------------------------+ | UNIDENTIFIED COMMANDS | |------------------------------------------------------------| | Command | Default | |----------------------------+-------------------------------| | S39 | Unidentified | |----------------------------+-------------------------------| | S40 | Unidentified | |----------------------------+-------------------------------| | S41 | Unidentified | +------------------------------------------------------------+ Proprietary AT Command Set +------------------------------------------------------------+ | DIAL | |------------------------------------------------------------| | Type: | Immediate | |--------------+---------------------------------------------| | Format: | AT [cmds] D<#>;[cmds] | |--------------+---------------------------------------------| | Description: | Dials the telephone number indicated | | | according to any modifiers included in the | | | string. | |--------------+---------------------------------------------| | Command | Function | |--------------+---------------------------------------------| | DL | Re-dial last number. | |--------------+---------------------------------------------| | DP | Pulse dialing enabled. | |--------------+---------------------------------------------| | DS=n | Dial stored telephone number n. | |--------------+---------------------------------------------| | DT | Tone dialing enabled. | |--------------+---------------------------------------------| | DW | Dialing resumed following dial tone | | | detection. | |--------------+---------------------------------------------| | D, | Dialing paused for amount of time specified | | | in S8 register. | |--------------+---------------------------------------------| | D! | Flash function initiated. Modem commanded | | | to go off-hook for specified time before | | | returning on-hook. | |--------------+---------------------------------------------| | D@ | Wait for Quiet Answer function enabled. | | | Modem waits until a "quiet answer," a | | | ring-back signal followed by silence up to | | | the time specified in S7, is received prior | | | to executing the rest of the dial string. | |--------------+---------------------------------------------| | D^ | Calling tone enabled for this call. | |--------------+---------------------------------------------| | D& | Wait for prompt tone detection function | | | enabled. Waits for prompt tone for amount | | | of time specified by the S7 command. | |--------------+---------------------------------------------| | D; | Modem returned to idle state after dialing. | | | The semicolon can only be placed at the end | | | of the dial command. | +------------------------------------------------------------+ +------------------------------------------------------------+ | DISPLAY INFORMATION | |------------------------------------------------------------| | Type: | Immediate | |--------------+---------------------------------------------| | Format: | AT [cmds] In [cmds] | |--------------+---------------------------------------------| | Description: | Displays information requested about the | | | modem. | |--------------+---------------------------------------------| | Command | Function | |--------------+---------------------------------------------| | I0 | Displays product identification code. | |--------------+---------------------------------------------| | I1 | Displays ROM checksum. | |--------------+---------------------------------------------| | I2 | Tests and displays ROM checksum result. | |--------------+---------------------------------------------| | I3 | Displays firmware revision. | |--------------+---------------------------------------------| | I6 | Displays data pump model and revision. | +------------------------------------------------------------+ +------------------------------------------------------------+ | LINE SPEED | |------------------------------------------------------------| | Type: | Register | |--------------+---------------------------------------------| | Format: | AT [cmds] S37=n [cmds] | |--------------+---------------------------------------------| | Description: | Sets the maximum allowable data exchange | | | rate attempted during the handshaking | | | process. | |--------------+---------------------------------------------| | Command | Function | |--------------+---------------------------------------------| | i S37=0 | Attempt to connect at fastest common speed. | |--------------+---------------------------------------------| | S37=1 | Set speed to 300bps. | |--------------+---------------------------------------------| | S37=2 | Set speed to 300bps. | |--------------+---------------------------------------------| | S37=3 | Set speed to 300bps. | |--------------+---------------------------------------------| | S37=5 | Set speed to 1200bps. | |--------------+---------------------------------------------| | S37=6 | Set speed to 2400bps. | |--------------+---------------------------------------------| | S37=7 | Attempt to connect with V.23. | |--------------+---------------------------------------------| | S37=8 | Set speed to 4800bps. | |--------------+---------------------------------------------| | S37=9 | Set speed to 9600bps. | |--------------+---------------------------------------------| | S37=10 | Set speed to 12Kbps. | |--------------+---------------------------------------------| | S37=11 | Set speed to 14.4Kbps. | |--------------+---------------------------------------------| | S37=12 | Set speed to 7200bps. | +------------------------------------------------------------+