XIRCOM, INC. ============ CEM-33BT Card Type Modem (asynchronous), Ethernet Chipset Unidentified Maximum Onboard Memory 64KB SRAM/256KB Flash RAM Boot ROM Not available Network Transfer Rate 10Mbps Topology Star Wire Type Unshielded twisted pair Maximum Data Rate 33.6Kbps Maximum Fax Rate 14.4Kbps Data Modulation Bell 212A ITU-T V.22, V.22bis, V.23, V.32, V.32bis, V.34 AT&T V.32terbo Fax Modulation ITU-T V.17, V.27ter, V.29 Error MNP5, V.42, V.42bis Correction/Compression Fax Class Class I & II Data Bus PCMCIA Type II +------------------------------------------------------------+ | CONNECTIONS | |------------------------------------------------------------| | Function | Label | Function | Label | |-------------------------+-------+------------------+-------| | MAM connector to PCMCIA | CN1 | MAM connector to | CN3 | | card | | PCMCIA card | | |-------------------------+-------+------------------+-------| | Telephone line out | CN2 | Coaxial cable | CN4 | | | | connector | | +------------------------------------------------------------+ +------------------------------------------------------------+ | DIAGNOSTIC LED(S) | |------------------------------------------------------------| | LED | Color | Status | Condition | |------+--------------+--------+-----------------------------| | LED1 | Unidentified | On | Card is transmitting or | | | | | receiving data over the | | | | | modem | |------+--------------+--------+-----------------------------| | LED1 | Unidentified | Off | Card is not transmitting or | | | | | receiving data over the | | | | | modem | |------+--------------+--------+-----------------------------| | LED2 | Unidentified | On | Carrier signal detected | |------+--------------+--------+-----------------------------| | LED2 | Unidentified | Off | Carrier signal not detected | |------+--------------+--------+-----------------------------| | LED3 | Unidentified | On | Card is transmitting or | | | | | receiving data over | | | | | Ethernet | |------+--------------+--------+-----------------------------| | LED3 | Unidentified | Off | Card is not transmitting or | | | | | receiving data over | | | | | Ethernet | |------+--------------+--------+-----------------------------| | LED4 | Unidentified | On | Network connection is good | |------+--------------+--------+-----------------------------| | LED4 | Unidentified | Off | Network connection is | | | | | broken | +------------------------------------------------------------+ +------------------------------------------------------------+ | SUPPORTED STANDARD COMMANDS | |------------------------------------------------------------| | Basic AT Commands | |------------------------------------------------------------| | +++, A/ | |------------------------------------------------------------| | A, D, E, H, M, N, P, Q, T, V, W, X, Y, Z | |------------------------------------------------------------| | &C, &D, &F, &G, &K, &P, &S, &V, &W, &Y, &Z | |------------------------------------------------------------| | Extended AT Commands | |------------------------------------------------------------| | \A, \B, \C, \G, \K, \N, \Q, \T, \U, \V, \X, \Y, \Z | |------------------------------------------------------------| | %A, %C, %E, %G | |------------------------------------------------------------| | Special AT Commands | |------------------------------------------------------------| | -C, "H, -J, "O | |------------------------------------------------------------| | S-Registers | |------------------------------------------------------------| | S0, S1, S2, S3, S4, S5, S6, S7, S8, S9, S10, S11, S25, | | S30, S46, S82, S95, S108 | |------------------------------------------------------------| | Note: See MHI help file for complete information. | +------------------------------------------------------------+ Proprietary AT Command Set See document XIRCOM, INC. CEM-33BTMD for a full command summary.