WILDCARD TECHNOLOGIES, INC. =========================== SATISFAXTION MOBILE PDMCIA9025COMBO Card Type Modem (asynchronous), Token Ring Chipset Texas Instruments TMS380C25 Maximum Onboard Memory 160KB DRAM/128KB PROM Network Transfer Rate 4/16Mbps Maximum Data Rate 14.4Kbps Maximum Fax Rate 14.4Kbps Data Bus PCMCIA Type II Fax Class Class I & II Data Modulation Bell 103A/212A ITU-T V.21, V.22, V.23, V.22bis, V.32, V.32bis Fax Modulation Unidentified Error MNP5, MNP10, V.42, V.42bis Correction/Compression Topology Token Ring Wire Type Shielded/Unshielded twisted pair Boot ROM Not available 52772 +------------------------------------------------------------+ | SUPPORTED STANDARD COMMANDS | |------------------------------------------------------------| | Basic AT Commands | |------------------------------------------------------------| | +++, A/ | |------------------------------------------------------------| | A, B, E, H, L, M, N, O, P, Q, T, V, W, X, Y, Z | |------------------------------------------------------------| | &C, &D, &F, &G, &P, &Q, &R, &S, &T, &V, &W, &Y, &Z | |------------------------------------------------------------| | Extended AT Commands | |------------------------------------------------------------| | \A, \B, \G, \J, \K, \L, \N, \W | |------------------------------------------------------------| | %C, %L, %Q | |------------------------------------------------------------| | Special AT Commands | |------------------------------------------------------------| | -K, -Q, *H, )M, @M, :E, +MS | |------------------------------------------------------------| | S-Registers | |------------------------------------------------------------| | S0, S1, S2, S3, S4, S5, S6, S7, S8, S9, S10, S12, S14, | | S16, S18, S21, S22, S23, S24, S25, S27, | |------------------------------------------------------------| | S28, S29, S30, S31, S32, S33, S36, S37, S38, S39, S40, | | S41, S46, S48, S82, S86, S91, S92, S95, | |------------------------------------------------------------| | S99, S201 | +------------------------------------------------------------+ Proprietary AT Command Set +------------------------------------------------------------+ | CALLBACK NUMBER | |------------------------------------------------------------| | Type: | Configuration | |--------------+---------------------------------------------| | Format: | AT [cmds] *Pn:xxxx:<#> | |--------------+---------------------------------------------| | Description: | Sets callback number at location n with the | | | password xxxx. | +------------------------------------------------------------+ +------------------------------------------------------------+ | COMMAND SET | |------------------------------------------------------------| | Type: | Immediate | |--------------+---------------------------------------------| | Format: | AT [cmds] S80=n [cmds] | |--------------+---------------------------------------------| | Description: | Selects the active command set. | |------------------------------------------------------------| | Command | Function | |---------------+--------------------------------------------| | S80=0 | Switch to AT command set. | |---------------+--------------------------------------------| | S80=33 | Switch to V.25bis command set. | +------------------------------------------------------------+ +------------------------------------------------------------+ | DISPLAY CALLBACK NUMBERS | |------------------------------------------------------------| | Type: | Immediate | |--------------+---------------------------------------------| | Format: | AT [cmds] *L [cmds] | |--------------+---------------------------------------------| | Description: | Displays the list of all callback numbers. | +------------------------------------------------------------+ +------------------------------------------------------------+ | END REMOTE CONFIGURATION | |------------------------------------------------------------| | Type: | Immediate | |--------------+---------------------------------------------| | Format: | AT [cmds] *E [cmds] | |--------------+---------------------------------------------| | Description: | Ends the remote configuration session | | | currently in progress. | +------------------------------------------------------------+ +------------------------------------------------------------+ | PROTOCOL/SPEED | |------------------------------------------------------------| | Type: | Configuration | |--------------+---------------------------------------------| | Format: | AT [cmds] Fn [cmds] | |--------------+---------------------------------------------| | Description: | Selects the protocol and speed the modem | | | will attempt to connect at. | |--------------+---------------------------------------------| | Command | Function | |--------------+---------------------------------------------| | F0 | Auto-detect the highest common connect | | | speed. | |--------------+---------------------------------------------| | F1 | Select V.21 or Bell 103 at 300bps speed. | |--------------+---------------------------------------------| | F3 | Select V.23 at 75/1200bps speed. | |--------------+---------------------------------------------| | F4 | Select V.22 or Bell 212A at 1200bps speed. | |--------------+---------------------------------------------| | F5 | Select V.22bis at 2400bps speed. | |--------------+---------------------------------------------| | F6 | Select V.32/V.32bis at 4800bps speed. | |--------------+---------------------------------------------| | F7 | Select V.32bis at 7200bps speed. | |--------------+---------------------------------------------| | F8 | Select V.32/V.32bis at 9600bps speed. | |--------------+---------------------------------------------| | F9 | Select V.32bis at 12Kbps speed. | |--------------+---------------------------------------------| | F10 | Select V.32bis at 14.4Kbps speed | +------------------------------------------------------------+ +------------------------------------------------------------+ | REMOTE ESCAPE CHARACTER | |------------------------------------------------------------| | Type: | Register | |--------------+---------------------------------------------| | Format | AT [cmds] S202=n [cmds] | |--------------+---------------------------------------------| | Default: | Unidentified | |--------------+---------------------------------------------| | Range: | Unidentified | |--------------+---------------------------------------------| | Unit: | 1 ASCII character | |--------------+---------------------------------------------| | Description: | Selects a character to be used for escape | | | sequences during remote configuration | | | sessions. | +------------------------------------------------------------+ +------------------------------------------------------------+ | REQUEST REMOTE CONFIGURATION | |------------------------------------------------------------| | Type: | Immediate | |--------------+---------------------------------------------| | Format: | AT [cmds] *R [cmds] | |--------------+---------------------------------------------| | Description: | Requests a remote configuration session | | | with the remote modem. | +------------------------------------------------------------+ Proprietary V.25bis Command Set +------------------------------------------------------------+ | CALL REQUESTED NUMBER WITH IDENTIFICATION | |------------------------------------------------------------| | Type: | Immediate | |--------------+---------------------------------------------| | Format: | CRI<#> | |--------------+---------------------------------------------| | Description: | Dials the number given. If supported, the | | | modem's identification string will be sent | | | with the number. | +------------------------------------------------------------+ +------------------------------------------------------------+ | EXECUTE AT COMMAND | |------------------------------------------------------------| | Type: | Immediate | |--------------+---------------------------------------------| | Format: | CNL[AT cmds] | |--------------+---------------------------------------------| | Description: | Executes an AT command string. | +------------------------------------------------------------+ +------------------------------------------------------------+ | IDENTIFICATION STRING | |------------------------------------------------------------| | Type: | Configuration | |--------------+---------------------------------------------| | Format: | AT [cmds] PRIxxxx [cmds] | |--------------+---------------------------------------------| | Description: | Sets the modem's identification string to | | | xxxx. | +------------------------------------------------------------+ See document WILDCARD TECHNOLOGIES, INC. SATISFAXTION MOBILE