U.S. ROBOTICS, INC. =================== COURIER V.34 FAX (EXTERNAL) Card Type Fax, Modem (synchronous/asynchronous) Chip Set U.S. Robotics Maximum Data Rate 28.8Kbps Maximum Fax Rate 14.4Kbps Data Bus External Fax Class Class I & II Data Modulation Bell 103/212A Protocol ITU-T V.21, V.22, V.22bis, V.23, V.25bis, V.32, V.32bis, V.34 Rockwell V.FC U.S. Robotics HST, V.32terbo Fax Modulation ITU-T V.17, V.21, V.27ter, V.29 Protocol Error HST, MNP5, V.42, V.42bis Correction/Compression +------------------------------------------------------------+ | CONNECTIONS | |------------------------------------------------------------| | Function | Label | Function | Label | |------------------------------------------------------------| | RS-232/422 | CN1 | DC power | CN4 | |----------------------+----------+-------------------+------| | Line out | CN2 | Voice/Data switch | SW2 | |----------------------+----------+-------------------+------| | Line in | CN3 | Power switch | SW3 | +------------------------------------------------------------+ +------------------------------------------------------------+ | USER CONFIGURABLE SETTINGS | |------------------------------------------------------------| | Setting | Label | Position | |-----------------------------------------+-------+----------| | i DTR normal | SW1/A | Off | |-----------------------------------------+-------+----------| | DTR forced high | SW1/A | On | |-----------------------------------------+-------+----------| | i Verbose (word) format enabled | SW1/B | Off | |-----------------------------------------+-------+----------| | Numeric format enabled | SW1/B | On | |-----------------------------------------+-------+----------| | i Result code display enabled | SW1/C | On | |-----------------------------------------+-------+----------| | Result code display disabled | SW1/C | Off | |-----------------------------------------+-------+----------| | i Local echo enabled | SW1/D | Off | |-----------------------------------------+-------+----------| | Local echo disabled | SW1/D | On | |-----------------------------------------+-------+----------| | i Auto-answer disabled | SW1/E | On | |-----------------------------------------+-------+----------| | Auto-answer enabled, off-hook on first | SW1/E | Off | | ring | | | |-----------------------------------------+-------+----------| | i CD normal | SW1/F | Off | |-----------------------------------------+-------+----------| | CD forced high | SW1/F | On | |-----------------------------------------+-------+----------| | i Result code display enabled in both | SW1/G | Off | | originate and answer mode | | | |-----------------------------------------+-------+----------| | Result code display enabled in | SW1/G | On | | originate mode only | | | |-----------------------------------------+-------+----------| | i Smart mode | SW1/H | On | |-----------------------------------------+-------+----------| | Dumb mode | SW1/H | Off | |-----------------------------------------+-------+----------| | i Escape code response: modem goes | SW1/I | Off | | on-hook, off-line command mode, returns | | | | 'NO CARRIER' | | | |-----------------------------------------+-------+----------| | Escape code response: modem stays | SW1/I | On | | on-line, on-line command mode, returns | | | | 'OK' | | | |-----------------------------------------+-------+----------| | i Reset and load from profiles in NVRAM | SW1/J | Off | |-----------------------------------------+-------+----------| | Reset and load from factory settings in | SW1/J | On | | ROM | | | +------------------------------------------------------------+ +------------------------------------------------------------+ | DIAGNOSTIC LED(S) | |------------------------------------------------------------| | LED | Color | Status | Condition | |---------+-------+----------+-------------------------------| | HS | Red | On | Modem is operating at 2400bps | | | | | or faster | |---------+-------+----------+-------------------------------| | HS | Red | Off | Modem is operating at slower | | | | | than 2400bps | |---------+-------+----------+-------------------------------| | AA | Red | On | Auto-answer enabled | |---------+-------+----------+-------------------------------| | AA | Red | Off | Auto-answer disabled | |---------+-------+----------+-------------------------------| | AA | Red | Blinking | Phone is ringing | |---------+-------+----------+-------------------------------| | CD | Red | On | Carrier signal detected | |---------+-------+----------+-------------------------------| | CD | Red | Off | Carrier signal not detected | |---------+-------+----------+-------------------------------| | OH | Red | On | Modem is off-hook | |---------+-------+----------+-------------------------------| | OH | Red | Off | Modem is on-hook | |---------+-------+----------+-------------------------------| | RD | Red | On | Modem is receiving data | |---------+-------+----------+-------------------------------| | RD | Red | Off | Modem is not receiving data | |---------+-------+----------+-------------------------------| | SD | Red | On | Modem is transmitting data | |---------+-------+----------+-------------------------------| | SD | Red | Off | Modem is not transmitting | | | | | data | |---------+-------+----------+-------------------------------| | TR | Red | On | DTR signal is high | |---------+-------+----------+-------------------------------| | TR | Red | Off | DTR signal is low | |---------+-------+----------+-------------------------------| | MR | Red | On | Power is on | |---------+-------+----------+-------------------------------| | MR | Red | Off | Power is off | |---------+-------+----------+-------------------------------| | RS | Red | On | Modem sends RTS signal | |---------+-------+----------+-------------------------------| | RS | Red | Off | RTS forced low during receive | | | | | data hardware flow control | |---------+-------+----------+-------------------------------| | CS | Red | On | Synchronous transmission or | | | | | before CTS forced low during | | | | | transmit hardware flow | | | | | control | |---------+-------+----------+-------------------------------| | CS | Red | Off | Modem doesn't send CTS to | | | | | remote | |---------+-------+----------+-------------------------------| | SYN | Red | On | Modem in synchronous mode | |---------+-------+----------+-------------------------------| | SYN | Red | Off | Modem not in synchronous mode | |---------+-------+----------+-------------------------------| | SYN | Red | Blinking | Dial security enabled | |---------+-------+----------+-------------------------------| | ARQ/FAX | Red | On | Modem is connected in ARQ | | | | | mode | |---------+-------+----------+-------------------------------| | ARQ/FAX | Red | Off | Modem is not connected in ARQ | | | | | mode | |---------+-------+----------+-------------------------------| | ARQ/FAX | Red | Slow | Data being retransmitted | | | | blink | | |---------+-------+----------+-------------------------------| | ARQ/FAX | Red | Fast | Modem is connected in FAX | | | | blink | mode | +------------------------------------------------------------+ Proprietary AT Command Set See document V2007 for a full command summary.