UNIDENTIFIED ============ MODEM ANCHOR 2400E (REV.2) Card Type Modem (asynchronous) Chip Set Unidentified Maximum Data Rate 2400bps Maximum Fax Rate 9600bps Data Bus External Fax Class Unidentified Data Modulation Protocol Bell 103J/212A ITU-T V.21, V.22, V.22bis Fax Modulation Protocol ITU-T V.27ter, V.29 +------------------------------------------------------------+ | CONNECTIONS | |------------------------------------------------------------| | Function | Label | Function | Label | |------------------------------------------------------------| | Line out | CN1 | RS-232/422 | CN3 | |-----------------------------+----------+------------+------| | Line in | CN2 | DC power | CN4 | +------------------------------------------------------------+ +------------------------------------------------------------+ | USER CONFIGURABLE SETTINGS | |------------------------------------------------------------| | Setting | Label | Position | |-----------------------------------------+-------+----------| | i DTR normal | SW1/1 | On | |-----------------------------------------+-------+----------| | DTR forced high | SW1/1 | Off | |-----------------------------------------+-------+----------| | i Bell protocol set after | SW1/2 | Off | | initialization | | | |-----------------------------------------+-------+----------| | ITU-T protocol set after initialization | SW1/2 | On | |-----------------------------------------+-------+----------| | i Factory configured | SW1/3 | On | |-----------------------------------------+-------+----------| | i Factory configured | SW1/4 | On | +------------------------------------------------------------+ +------------------------------------------------------------+ | DIAGNOSTIC LED(S) | |------------------------------------------------------------| | LED | Color | Status | Condition | |-----+-------+--------+-------------------------------------| | MR | Red | On | Power is on | |-----+-------+--------+-------------------------------------| | MR | Red | Off | Power is off | |-----+-------+--------+-------------------------------------| | RD | Red | On | Modem is receiving data | |-----+-------+--------+-------------------------------------| | RD | Red | Off | Modem is not receiving data | |-----+-------+--------+-------------------------------------| | SD | Red | On | Modem is transmitting data | |-----+-------+--------+-------------------------------------| | SD | Red | Off | Modem is not transmitting data | |-----+-------+--------+-------------------------------------| | AA | Red | On | Auto-answer enabled | |-----+-------+--------+-------------------------------------| | AA | Red | Off | Auto-answer disabled | |-----+-------+--------+-------------------------------------| | CD | Red | On | Carrier signal detected | |-----+-------+--------+-------------------------------------| | CD | Red | Off | Carrier signal not detected | |-----+-------+--------+-------------------------------------| | OH | Red | On | Modem is off-hook | |-----+-------+--------+-------------------------------------| | OH | Red | Off | Modem is on-hook | |-----+-------+--------+-------------------------------------| | HS | Red | On | Modem is operating at 2400bps | |-----+-------+--------+-------------------------------------| | HS | Red | Off | Modem is operating at slower than | | | | | 2400bps | |-----+-------+--------+-------------------------------------| | TR | Red | On | DTR signal is high | |-----+-------+--------+-------------------------------------| | TR | Red | Off | DTR signal is low | +------------------------------------------------------------+ Proprietary AT Command Set See document V1876 for a full command summary.