RAD DATA COMMUNICATIONS ======================= SRM-9 (TB) Card Type Short Range Modem Chip Set Unidentified I/O Options 25-pin serial port (RS-232), Terminal block Wiring Type Unshielded twisted pair Maximum Data Rate 128Kbps (synchronous), 115.2Kbps (asynchronous) Data Bus External +------------------------------------------------------------+ | CONNECTIONS | |------------------------------------------------------------| | Function | Label | Function | Label | |------------------------------------------------------------| | DTE/DCE serial port | CN1 | Twisted pair | CN2 | | (25-pin connector) | | connection | | | | | terminal blocks | | +------------------------------------------------------------+ +------------------------------------------------------------+ | USER CONFIGURABLE SETTINGS | |------------------------------------------------------------| | Setting | Label | Position | |-----------------------------------------+-------+----------| | Pattern (BERT) test activated | SW1/1 | On | |-----------------------------------------+-------+----------| | Pattern (BERT) test not activated | SW1/1 | Off | |-----------------------------------------+-------+----------| | Local digital loopback test activated | SW1/2 | On | |-----------------------------------------+-------+----------| | Local digital loopback test not | SW1/2 | Off | | activated | | | |-----------------------------------------+-------+----------| | Local analog loopback test activated | SW1/3 | On | |-----------------------------------------+-------+----------| | Local analog loopback test not | SW1/3 | Off | | activated | | | |-----------------------------------------+-------+----------| | Remote digital loopback test activated | SW1/4 | On | |-----------------------------------------+-------+----------| | Remote digital loopback test not | SW1/4 | Off | | activated | | | +------------------------------------------------------------+ +------------------------------------------------------------+ | DIAGNOSTIC LEDS | |------------------------------------------------------------| | LED | Color | Status | Condition | |------+--------------+--------+-----------------------------| | TD | Unidentified | On | Device is transmitting data | |------+--------------+--------+-----------------------------| | TD | Unidentified | Off | Device is not transmitting | | | | | data | |------+--------------+--------+-----------------------------| | RD | Unidentified | On | Device is receiving pulses | | | | | from network | |------+--------------+--------+-----------------------------| | RD | Unidentified | Off | Device is not receiving | | | | | pulses from network | |------+--------------+--------+-----------------------------| | RTS | Unidentified | On | RTS signal is high | |------+--------------+--------+-----------------------------| | RTS | Unidentified | Off | RTS signal is low | |------+--------------+--------+-----------------------------| | DCD | Unidentified | On | DCD signal is high | |------+--------------+--------+-----------------------------| | DCD | Unidentified | Off | DCD signal is low | |------+--------------+--------+-----------------------------| | ERR | Unidentified | On | Error detected on received | | | | | data during BERT test | |------+--------------+--------+-----------------------------| | ERR | Unidentified | Off | Error not detected on | | | | | received configuration | | | | | information | |------+--------------+--------+-----------------------------| | TST | Unidentified | On | Device is conducting a | | | | | loopback test | |------+--------------+--------+-----------------------------| | TST | Unidentified | Off | Device is not conducting a | | | | | loopback test | +------------------------------------------------------------+