PROMETHEUS PRODUCTS, INC ======================== CYBERPORT PRO PC144IV Card Type Fax, Modem (synchronous/asynchronous) Chip Set Unidentified I/O Options Speakerphone Maximum Data Rate 14.4Kbps Maximum Fax Rate 14.4Kbps Data Bus 8-bit ISA Fax Class Class II Data Modulation Bell 103/212A Protocol ITU-T V.21, V.22, V.22bis, V.23, V.32, V.32bis Fax Modulation ITU-T V.17, V.21CH2, V.27ter, V.29, Protocol V.33 Error MNP5, V.42, V.42bis Correction/Compression +------------------------------------------------------------+ | CONNECTIONS | |------------------------------------------------------------| | Function | Label | Function | Label | |------------------------------------------------------------| | Line out | CN1 | Microphone | CN4 | | | | connection | | |---------------------+---------+----------------------+-----| | Line in | CN2 | Sound card | CN5 | | | | connection | | |---------------------+---------+----------------------+-----| | Speaker connection | CN3 | | | +------------------------------------------------------------+ +------------------------------------------------------------+ | SUPPORTED COMMAND SET | |------------------------------------------------------------| | Basic AT Commands | |------------------------------------------------------------| | AT, '+++', 'Comma', A/ | |------------------------------------------------------------| | A, B, C, E, H, L, M, N, O, Q, S, V, W, X, Y, Z | |------------------------------------------------------------| | &C, &D, &F, &G, &J, &K, &P, &S, &U, &V, &W, &Y, &Z | |------------------------------------------------------------| | Extended AT Commands | |------------------------------------------------------------| | \C, \G, \V, \X, %E | |------------------------------------------------------------| | S Registers | |------------------------------------------------------------| | S0, S1, S2, S3, S4, S5, S6, S7, S8, S9, S10, S11, S12, | | S25, S26, S36 | |------------------------------------------------------------| | S37, S38, S46, S48 | |------------------------------------------------------------| | Note: Please see MHI Help file for full command | | documentation. | +------------------------------------------------------------+ Proprietary AT Command Set +------------------------------------------------------------+ | BREAK TYPE | |------------------------------------------------------------| | Type: | Configuration | |--------------+---------------------------------------------| | Format: | AT [cmds] \Kn [cmds] | |--------------+---------------------------------------------| | Description: | Configures action of break signal | |------------------------------------------------------------| | Command | Function | |-----------+------------------------------------------------| | \K0 | Online command mode enabled, send no break to | | | remote modem | |-----------+------------------------------------------------| | \K1 | Break sent to remote modem and buffers cleared | |-----------+------------------------------------------------| | \K2 | Online command mode enabled, send no break to | | | remote modem | |-----------+------------------------------------------------| | \K3 | Send break to remote modem immediately | |-----------+------------------------------------------------| | \K4 | Online command mode enabled, send no break to | | | remote modem | |-----------+------------------------------------------------| | i \K5 | Send break with transmitted data | +------------------------------------------------------------+ +------------------------------------------------------------+ | COMMUNICATIONS MODE | |------------------------------------------------------------| | Type: | Configuration | |--------------+---------------------------------------------| | Format: | AT [cmds] &Qn [cmds] | |--------------+---------------------------------------------| | Description: | Selects communications mode options | |--------------+---------------------------------------------| | Command | Mode | |--------------+---------------------------------------------| | i &Q0 | Asynchronous mode, serial port speed | | | follows connect speed. | |--------------+---------------------------------------------| | &Q5 | Error correction mode, to disable error | | | correction use &Q0, &Q3 or &Q6, or modify | | | S36, S46, or S48 | |--------------+---------------------------------------------| | &Q6 | Buffered asynchronous mode | +------------------------------------------------------------+ +------------------------------------------------------------+ | COMPRESSION | |------------------------------------------------------------| | Type: | Configuration | |--------------+---------------------------------------------| | Format: | AT [cmds] %Cn [cmds] | |--------------+---------------------------------------------| | Description: | Selects data compression | |--------------+---------------------------------------------| | Command | Function | |--------------+---------------------------------------------| | %C0 | MNP5 disabled | |--------------+---------------------------------------------| | %C1 | MNP5 enabled | +------------------------------------------------------------+ +------------------------------------------------------------+ | CONNECT MODE | |------------------------------------------------------------| | Type: | Configuration | |--------------+---------------------------------------------| | Format: | AT [cmds] \Nn [cmds] | |--------------+---------------------------------------------| | Description: | Controls the type of connection the modem | | | will operate in | |--------------+---------------------------------------------| | Command | Function | |--------------+---------------------------------------------| | \N0 | Normal mode enabled | |--------------+---------------------------------------------| | \N1 | Direct mode enabled | |--------------+---------------------------------------------| | \N2 | Reliable MNP mode enabled | |--------------+---------------------------------------------| | \N3 | Auto-reliable mode enabled | |--------------+---------------------------------------------| | \N4 | LAPM reliable mode enabled | |--------------+---------------------------------------------| | \N5 | Auto-reliable LAPM and buffer mode enabled | |--------------+---------------------------------------------| | \N6 | Auto-reliable LAPM and buffer mode plus MNP | | | enabled | +------------------------------------------------------------+ +------------------------------------------------------------+ | DIAL | |------------------------------------------------------------| | Type: | Immediate | |--------------+---------------------------------------------| | Format: | AT [cmds] D<#> [cmds] | |--------------+---------------------------------------------| | Description: | Dials telephone number according to any | | | modifiers included in the string | |--------------+---------------------------------------------| | Note: | Any combination of modifiers can be used to | | | produce the desired dial functions in | | | sequence. | |--------------+---------------------------------------------| | Modifier | Function | |--------------+---------------------------------------------| | L | Re-dial last number | |--------------+---------------------------------------------| | P | Pulse dialing enabled | |--------------+---------------------------------------------| | S=n | Dial stored telephone number n=0-3 | |--------------+---------------------------------------------| | T | Tone dialing enabled | |--------------+---------------------------------------------| | W | Dialing resumed following dial tone | | | detection for amount of time specified in | | | S7 register | |--------------+---------------------------------------------| | , | Dialing paused for amount of time specified | | | in S8 register | |--------------+---------------------------------------------| | @ | Wait for quiet answer for amount of time | | | specified in S7 register | |--------------+---------------------------------------------| | ! | Modem commanded to go off-hook for .5 | | | second before returning on-hook | |--------------+---------------------------------------------| | ; | Modem returned to command state after | | | dialing | +------------------------------------------------------------+ +------------------------------------------------------------+ | DICTIONARY SIZE | |------------------------------------------------------------| | Type: | Configuration | |--------------+---------------------------------------------| | Format: | AT [cmds] %Dn [cmds] | |--------------+---------------------------------------------| | Description: | Controls dictionary size | |--------------+---------------------------------------------| | Command | Function | |--------------+---------------------------------------------| | %D0 | Select 1/2Kbytes | |--------------+---------------------------------------------| | %D1 | Select 1Kbytes | |--------------+---------------------------------------------| | %D2 | Select 2Kbytes | +------------------------------------------------------------+ +------------------------------------------------------------+ | ERROR CONTROL BUFFER SIZE - MAXIMUM | |------------------------------------------------------------| | Type: | Register | |--------------+---------------------------------------------| | Format: | AT [cmds] S50=n [cmds] | |--------------+---------------------------------------------| | Default: | 200 | |--------------+---------------------------------------------| | Range: | 0-255 | |--------------+---------------------------------------------| | Unit: | 1 Character | |--------------+---------------------------------------------| | Description: | Sets the maximum buffer size for error | | | control | +------------------------------------------------------------+ +------------------------------------------------------------+ | ERROR CONTROL BUFFER SIZE - MINIMUM | |------------------------------------------------------------| | Type: | Register | |--------------+---------------------------------------------| | Format: | AT [cmds] S49=n [cmds] | |--------------+---------------------------------------------| | Default: | 10 | |--------------+---------------------------------------------| | Range: | 0-255 | |--------------+---------------------------------------------| | Unit: | 1 Character | |--------------+---------------------------------------------| | Description: | Sets the minimum buffer size for error | | | control | +------------------------------------------------------------+ +------------------------------------------------------------+ | FLOW CONTROL TYPE | |------------------------------------------------------------| | Type: | Configuration | |--------------+---------------------------------------------| | Format: | AT [cmds] \Qn [cmds] | |--------------+---------------------------------------------| | Description: | Sets type of flow control used by modem | |--------------+---------------------------------------------| | Command | Function | |--------------+---------------------------------------------| | \Q0 | Flow control disabled | |--------------+---------------------------------------------| | \Q1 | XON/XOFF; software flow control; RTS/CTS | | | bi-directional enabled | |--------------+---------------------------------------------| | \Q2 | Unidirectional CTS interface signal enabled | |--------------+---------------------------------------------| | \Q3 | Bi-directional RTS/CTS flow control enabled | |--------------+---------------------------------------------| | \Q4 | Unidirectional XON/XOFF flow control by DCE | | | enabled | +------------------------------------------------------------+ +------------------------------------------------------------+ | INACTIVITY TIMER | |------------------------------------------------------------| | Type: | Configuration | |--------------+---------------------------------------------| | Format: | AT [cmds] \Tn [cmds] | |--------------+---------------------------------------------| | Default: | 0 | |--------------+---------------------------------------------| | Range: | 0-90 | |--------------+---------------------------------------------| | Unit: | 1 minute | |--------------+---------------------------------------------| | Description: | Sets the length of time that the modem does | | | not receive information before it | | | disconnects. | +------------------------------------------------------------+ +------------------------------------------------------------+ | REPORT INFORMATION | |------------------------------------------------------------| | Type: | Immediate | |--------------+---------------------------------------------| | Format: | AT [cmds] In [cmds] | |--------------+---------------------------------------------| | Description: | Displays information requested | |--------------+---------------------------------------------| | Command | Function | |--------------+---------------------------------------------| | I0 | Reports 3-digit product code | |--------------+---------------------------------------------| | I1 | Reports checksum | |--------------+---------------------------------------------| | I2 | Return 'OK' response | |--------------+---------------------------------------------| | I | Reports firmware version information | |--------------+---------------------------------------------| | I4 | Reports configuration settings | +------------------------------------------------------------+