PROMETHEUS PRODUCTS, INC. ========================= MAC CYBERPORT PRO 144EV (M144EV) MAC CYBERPHONE 144EV (M144EV) MAC CYBERPHONE 144EVSP (M144EVSP) Card Type Fax, Modem (synchronous/asynchronous) Chip Set Unidentified I/O Options Speakerphone, Voice-mail Maximum Data Rate 14.4Kbps Maximum Fax Rate 14.4Kbps Data Bus External Fax Class Class I & II Data Modulation Bell 103/212A Protocol ITU-T V.21, V.22, V.22bis, V.23, V.32, V.32bis Fax Modulation ITU-T V.17, V.21CH2, V.27ter, V.29, Protocol V.33 Error MNP5, V.42, V.42bis Correction/Compression +------------------------------------------------------------+ | CONNECTIONS | |------------------------------------------------------------| | Function | Label | Function | Label | |------------------------------------------------------------| | Line out | CN1 | RS-232/422 | CN5 | |----------------------------+---------+--------------+------| | Line in | CN2 | DC power | CN6 | |----------------------------+---------+--------------+------| | Microphone in | CN3 | Power switch | SW1 | |----------------------------+---------+--------------+------| | Speaker out | CN4 | | | +------------------------------------------------------------+ +------------------------------------------------------------+ | DIAGNOSTIC LED(S) | |------------------------------------------------------------| | LED | Color | Status | Condition | |-----+-------+----------+-----------------------------------| | AA | Red | On | Auto-answer enabled | |-----+-------+----------+-----------------------------------| | AA | Red | Off | Auto-answer disabled | |-----+-------+----------+-----------------------------------| | AA | Red | Blinking | Phone is ringing | |-----+-------+----------+-----------------------------------| | CD | Red | On | Carrier signal detected | |-----+-------+----------+-----------------------------------| | CD | Red | Off | Carrier signal not detected | |-----+-------+----------+-----------------------------------| | OH | Red | On | Modem is off-hook | |-----+-------+----------+-----------------------------------| | OH | Red | Off | Modem is on-hook | |-----+-------+----------+-----------------------------------| | IO | Red | On | Modem is transmitting or | | | | | receiving data | |-----+-------+----------+-----------------------------------| | IO | Red | Off | Modem is not transmitting or | | | | | receiving data | |-----+-------+----------+-----------------------------------| | MR | Red | On | Power is on | |-----+-------+----------+-----------------------------------| | MR | Red | Off | Power is off | +------------------------------------------------------------+ Proprietary AT Command Set +------------------------------------------------------------+ | AUTO-RELIABLE TIME BUFFER CONFIGURATION | |------------------------------------------------------------| | Type: | Configuration | |--------------+---------------------------------------------| | Format: | AT [cmds] \Cn [cmds] | |--------------+---------------------------------------------| | Description: | Controls the handling of incoming data | | | during auto-reliable time period | |--------------+---------------------------------------------| | Command | Function | |--------------+---------------------------------------------| | \C0 | Data is discarded | |--------------+---------------------------------------------| | \C1 | Data is buffered | |--------------+---------------------------------------------| | \C2 | Data is discarded; modem returns to normal | | | mode on receiving auto-reliable fallback | | | character. | +------------------------------------------------------------+ +------------------------------------------------------------+ | AUTO-RETRAIN | |------------------------------------------------------------| | Type: | Configuration | |--------------+---------------------------------------------| | Format: | AT [cmds] %En [cmds] | |--------------+---------------------------------------------| | Description: | Controls auto-retrain mode | |--------------+---------------------------------------------| | Command | Function | |--------------+---------------------------------------------| | %E0 | Auto-retrain disabled | |--------------+---------------------------------------------| | %E1 | Auto-retrain enabled | +------------------------------------------------------------+ +------------------------------------------------------------+ | BREAK TYPE | |------------------------------------------------------------| | Type: | Configuration | |-------------------+----------------------------------------| | Format: | AT [cmds] \Kn [cmds] | |-------------------+----------------------------------------| | Description: | Configures action of break signal | |------------------------------------------------------------| | Command | Break from DTE | |------------+-----------------------------------------------| | \K0 | Online command mode enabled, send no break to | | | remote modem | |------------+-----------------------------------------------| | \K1 | Break sent to remote modem and buffered | | | cleared | |------------+-----------------------------------------------| | \K2 | Online command mode enabled, send no break to | | | remote modem | |------------+-----------------------------------------------| | \K3 | Send break to remote modem immediately | |------------+-----------------------------------------------| | \K4 | Online command mode enabled, send no break to | | | remote modem | |------------+-----------------------------------------------| | \K5 | Send break with transmitted data | +------------------------------------------------------------+ +------------------------------------------------------------+ | COMPRESSION | |------------------------------------------------------------| | Type: | Configuration | |--------------+---------------------------------------------| | Format: | AT [cmds] %Cn [cmds] | |--------------+---------------------------------------------| | Description: | Selects data compression | |--------------+---------------------------------------------| | Command | Function | |--------------+---------------------------------------------| | %C0 | Data compression disabled | |--------------+---------------------------------------------| | %C1 | MNP5 enabled | +------------------------------------------------------------+ +------------------------------------------------------------+ | CONNECT MODE | |------------------------------------------------------------| | Type: | Configuration | |--------------+---------------------------------------------| | Format: | AT [cmds] \Nn [cmds] | |--------------+---------------------------------------------| | Description: | Controls the type of connection the modem | | | will operate in | |--------------+---------------------------------------------| | Command | Function | |--------------+---------------------------------------------| | \N0 | Normal mode enabled | |--------------+---------------------------------------------| | \N1 | Direct mode enabled | |--------------+---------------------------------------------| | \N2 | MNP reliable mode enabled | |--------------+---------------------------------------------| | \N3 | Auto-reliable mode enabled | |--------------+---------------------------------------------| | \N4 | V.42 reliable mode enabled | |--------------+---------------------------------------------| | \N5 | V.42 auto-reliable mode enabled | |--------------+---------------------------------------------| | \N6 | Reliable mode enabled | +------------------------------------------------------------+ +------------------------------------------------------------+ | DICTIONARY SIZE | |------------------------------------------------------------| | Type: | Configuration | |--------------+---------------------------------------------| | Format: | AT [cmds] %Dn [cmds] | |--------------+---------------------------------------------| | Description: | Select dictionary size | |--------------+---------------------------------------------| | Command | Function | |--------------+---------------------------------------------| | %D0 | Select 1/2K dictionary | |--------------+---------------------------------------------| | %D1 | Select 1K dictionary | |--------------+---------------------------------------------| | %D2 | Select 2K dictionary | +------------------------------------------------------------+ +------------------------------------------------------------+ | ERROR CONTROL BUFFER - MAXIMUM | |------------------------------------------------------------| | Type: | Register | |--------------+---------------------------------------------| | Format: | AT [cmds] S50=n [cmds] | |--------------+---------------------------------------------| | Default: | 200 | |--------------+---------------------------------------------| | Range: | 0-255 | |--------------+---------------------------------------------| | Unit: | Unidentified | |--------------+---------------------------------------------| | Description: | Controls the maximum size of the error | | | control buffer | +------------------------------------------------------------+ +------------------------------------------------------------+ | ERROR CONTROL BUFFER - MINIMUM | |------------------------------------------------------------| | Type: | Register | |--------------+---------------------------------------------| | Format: | AT [cmds] S49=n [cmds] | |--------------+---------------------------------------------| | Default: | 10 | |--------------+---------------------------------------------| | Range: | 0-255 | |--------------+---------------------------------------------| | Unit: | Unidentified | |--------------+---------------------------------------------| | Description: | Controls the minimum size of the error | | | control buffer | +------------------------------------------------------------+ +------------------------------------------------------------+ | FLOW CONTROL | |------------------------------------------------------------| | Type: | Configuration | |--------------+---------------------------------------------| | Format: | AT [cmds] \Gn [cmds] | |--------------+---------------------------------------------| | Description: | Selects modem port flow control | |--------------+---------------------------------------------| | Command | Function | |--------------+---------------------------------------------| | \G0 | Flow control disabled | |--------------+---------------------------------------------| | \G1 | Flow control enabled | +------------------------------------------------------------+ +------------------------------------------------------------+ | FLOW CONTROL - HARDWARE | |------------------------------------------------------------| | Type: | Configuration | |--------------+---------------------------------------------| | Format: | AT [cmds] \Ln [cmds] | |--------------+---------------------------------------------| | Description: | Selects the transfer mode for MNP link | |--------------+---------------------------------------------| | Command | Function | |--------------+---------------------------------------------| | \L0 | Hardware flow control enabled (used for Mac | | | with standard Mac modem cable) | |--------------+---------------------------------------------| | \L1 | Hardware flow control disabled (used for PC | | | or Mac with hardware flow-control cable) | +------------------------------------------------------------+ +------------------------------------------------------------+ | FLOW CONTROL TYPE | |------------------------------------------------------------| | Type: | Configuration | |--------------+---------------------------------------------| | Format: | AT [cmds] \Qn [cmds] | |--------------+---------------------------------------------| | Description: | Sets type of flow control used by modem | |--------------+---------------------------------------------| | Command | Function | |--------------+---------------------------------------------| | \Q0 | Flow control disabled | |--------------+---------------------------------------------| | \Q1 | Bi-directional XON/XOFF flow control and | | | bi-directional RTS/CTS enabled | |--------------+---------------------------------------------| | \Q2 | CTS flow control by DCE enabled | |--------------+---------------------------------------------| | \Q3 | Bi-directional RTS/CTS flow control enabled | |--------------+---------------------------------------------| | \Q4 | Unidirectional XON/XOFF flow control by DCE | | | enabled | +------------------------------------------------------------+ +------------------------------------------------------------+ | MNP RESULT CODES | |------------------------------------------------------------| | Type: | Configuration | |--------------+---------------------------------------------| | Format: | AT [cmds] \Vn [cmds] | |--------------+---------------------------------------------| | Description: | Selects MNP result codes | |--------------+---------------------------------------------| | Command | Function | |--------------+---------------------------------------------| | \V0 | MNP result codes disabled | |--------------+---------------------------------------------| | \V1 | MNP result codes enabled | +------------------------------------------------------------+ +------------------------------------------------------------+ | INACTIVITY TIMER | |------------------------------------------------------------| | Type: | Configuration | |--------------+---------------------------------------------| | Format: | AT [cmds] \Tn [cmds] | |--------------+---------------------------------------------| | Default: | 0 | |--------------+---------------------------------------------| | Range: | 0-90 | |--------------+---------------------------------------------| | Unit: | 1 minute | |--------------+---------------------------------------------| | Description: | Sets the length of time that the modem does | | | not receive information before it | | | disconnects. | +------------------------------------------------------------+ +------------------------------------------------------------+ | REPORT INFORMATION | |------------------------------------------------------------| | Type: | Immediate | |--------------+---------------------------------------------| | Format: | AT [cmds] In [cmds] | |--------------+---------------------------------------------| | Description: | Displays information requested | |--------------+---------------------------------------------| | Command | Function | |--------------+---------------------------------------------| | I0 | Reports 3 digit product code | |--------------+---------------------------------------------| | I1 | Reports ROM checksum | |--------------+---------------------------------------------| | I2 | Reports OK | |--------------+---------------------------------------------| | I3 | Reports firmware version | |--------------+---------------------------------------------| | I4 | Reports configuration settings | +------------------------------------------------------------+ +------------------------------------------------------------+ | XON/XOFF PASS-THROUGH | |------------------------------------------------------------| | Type: | Configuration | |--------------+---------------------------------------------| | Format: | AT [cmds] \Xn [cmds] | |--------------+---------------------------------------------| | Description: | Selects whether XON/XOFF signals are sent | | | to remote modem | |--------------+---------------------------------------------| | Command | Function | |--------------+---------------------------------------------| | \X0 | XON/XOFF signals trapped by local modem | |--------------+---------------------------------------------| | \X1 | XON/XOFF passed through local modem | +------------------------------------------------------------+