PENRIL DATABILITY NETWORKS ========================== DX V.32TERBO M Modem Type Data (synchronous/asynchronous)/Fax Maximum Data Rate 19.2Kbps Maximum Fax Rate 14.4Kbps Data Bus External Fax Class Class I & II Data Modulation Bell 103A/212A, 208A/B Protocol ITU-T V.21, V.22, V.22bis, V.23, V.32, V.32bis, V.32terbo Fax Modulation ITU-T V.17, V.27ter, V.29 Protocol Error MNP5, V.42, V.42bis Correction/Compression +------------------------------------------------------------+ | CONNECTIONS | |------------------------------------------------------------| | Purpose | Location | Purpose | Location | |----------------+----------+---------------------+----------| | Lease line out | CN1 | Diagnostic | CN4 | | | | connector | | |----------------+----------+---------------------+----------| | Line in | CN2 | AC power | CN5 | |----------------+----------+---------------------+----------| | RS-232/422 | CN3 | Data/Voice | BT1 | +------------------------------------------------------------+ +------------------------------------------------------------+ | A/A1 - MI/MIC CONTROL | |------------------------------------------------------------| | Control Type | JP3 | JP4 | |------------------+--------------------+--------------------| |>> A/A1 control. | Pin 1 & 2 closed. | Pin 1 & 2 closed. | |------------------+--------------------+--------------------| | MI/MIC control. | Pin 2 & 3 closed. | Pin 2 & 3 closed. | +------------------------------------------------------------+ +------------------------------------------------------------+ | DIAL/LEASE LINE | |------------------------------------------------------------| | Line Type | JP1 | JP2 | |--------------------+-------------------+-------------------| |>> Dial line | Pin 1 & 2 closed. | Pin 1 & 2 closed. | | connected. | | | |--------------------+-------------------+-------------------| | Lease line | Pin 2 & 3 closed. | Pin 2 & 3 closed. | | connected. | | | +------------------------------------------------------------+ +------------------------------------------------------------+ | DTE CONNECTION - PIN 25 | |------------------------------------------------------------| | Function | JP6 | |---------------------------------+--------------------------| | Analog loopback (input). | Pin 1 & 2 closed. | |---------------------------------+--------------------------| |>> Test mode indicator (output). | Pin 2 & 3 closed. | +------------------------------------------------------------+ +------------------------------------------------------------+ | FACTORY CONFIGURED SETTINGS - DO NOT ALTER | |------------------------------------------------------------| | Jumper | Setting | |----------------------------+-------------------------------| | JP5 | Pin 2 & 3 closed. | +------------------------------------------------------------+ +------------------------------------------------------------+ | FRAME/SIGNAL GROUND | |------------------------------------------------------------| | Ground Type | JP7 | |----------------------------------------+-------------------| | Frame and signal ground connected. | Pin 1 & 2 closed. | |----------------------------------------+-------------------| |>> Frame and signal ground not | Pin 2 & 3 closed. | | connected. | | +------------------------------------------------------------+ +------------------------------------------------------------+ | DIAGNOSTIC LED(S) | |------------------------------------------------------------| | LED | Color | Status | Condition | |-----+-------+----------+-----------------------------------| | HS | Red | On | Modem is operating at 7200bps or | | | | | faster | |-----+-------+----------+-----------------------------------| | HS | Red | Off | Modem is operating at slower than | | | | | 7200bps | |-----+-------+----------+-----------------------------------| | AA | Red | On | Auto-answer enabled | |-----+-------+----------+-----------------------------------| | AA | Red | Off | Auto-answer disabled | |-----+-------+----------+-----------------------------------| | AA | Red | Blinking | Phone is ringing | |-----+-------+----------+-----------------------------------| | CD | Red | On | Carrier signal detected | |-----+-------+----------+-----------------------------------| | CD | Red | Off | Carrier signal not detected | |-----+-------+----------+-----------------------------------| | OH | Red | On | Modem is off-hook | |-----+-------+----------+-----------------------------------| | OH | Red | Off | Modem is on-hook | |-----+-------+----------+-----------------------------------| | RD | Red | On | Modem is receiving data | |-----+-------+----------+-----------------------------------| | RD | Red | Off | Modem is not receiving data | |-----+-------+----------+-----------------------------------| | SD | Red | On | Modem is transmitting data | |-----+-------+----------+-----------------------------------| | SD | Red | Off | Modem is not transmitting data | |-----+-------+----------+-----------------------------------| | TR | Red | On | DTR signal is high | |-----+-------+----------+-----------------------------------| | TR | Red | Flashing | Voice mode | |-----+-------+----------+-----------------------------------| | MR | Red | On | Modem ready | |-----+-------+----------+-----------------------------------| | MR | Red | Flashing | Test mode enabled | +------------------------------------------------------------+ Proprietary AT Command Set See document V1410 for a full command summary.