PENRIL DATABILITY NETWORKS
==========================

   ALLIANCE V.32/ALLIANCE V.32M

   Modem Type             Data (synchronous/asynchronous)/Fax     
   Maximum Data Rate      9600bps                                 
   Maximum Fax Rate       14.4Kbps                                
   Data Bus               External                                
   Fax Class              Class I & II                            
   Data Modulation        Bell 103A/212A                          
   Protocol                                                       
                          ITU-T V.21, V.22, V.22bis, V.26,        
                          V.26bis, V.27bis, V.27ter               
                                                                  
                          V.29, V.32                              
   Fax Modulation         ITU-T V.17, V.27ter, V.29               
   Protocol               
   Error                  MNP5, V.42, V.42bis                     
   Correction/Compression 

<gopher://bitreich.org/I/th99/t/P-R/51406-1.png>
   

                                                                 

   +------------------------------------------------------------+
   |                        CONNECTIONS                         |
   |------------------------------------------------------------|
   |    Purpose    | Location |       Purpose        | Location |
   |---------------+----------+----------------------+----------|
   | LCD display   |   LCD    | Line in              |   CN1    |
   |---------------+----------+----------------------+----------|
   | Left arrow    |   BT1    | Leased line out      |   CN2    |
   | button        |          |                      |          |
   |---------------+----------+----------------------+----------|
   | 1 button      |   BT2    | Leased line out      |   CN3    |
   |---------------+----------+----------------------+----------|
   | 2 button      |   BT3    | Switched line out    |   CN4    |
   |---------------+----------+----------------------+----------|
   | 3 button      |   BT4    | DC power             |   CN5    |
   |---------------+----------+----------------------+----------|
   | Right arrow   |   BT5    | Diagnostic connector |   CN6    |
   | button        |          |                      |          |
   |---------------+----------+----------------------+----------|
   | ENTER button  |   BT6    | RS-232/422           |   CN7    |
   +------------------------------------------------------------+

   +------------------------------------------------------------+
   |                   A/A1 - MI/MIC CONTROL                    |
   |------------------------------------------------------------|
   |   Control Type   |        JP5         |        JP6         |
   |------------------+--------------------+--------------------|
   |>> A/A1 control.  | Pin 1 & 2 closed.  | Pin 1 & 2 closed.  |
   |------------------+--------------------+--------------------|
   | MI/MIC control.  | Pin 2 & 3 closed.  | Pin 2 & 3 closed.  |
   +------------------------------------------------------------+

   +------------------------------------------------------------+
   |                   DTE CONNECTOR - PIN 25                   |
   |------------------------------------------------------------|
   |            Function             |           JP7            |
   |---------------------------------+--------------------------|
   |    Analog loopback (Input).     |    Pin 1 & 2 closed.     |
   |---------------------------------+--------------------------|
   |>> Test Mode Indicator (Output). |    Pin 2 & 3 closed.     |
   +------------------------------------------------------------+

   +------------------------------------------------------------+
   |                    FRAME/SIGNAL GROUND                     |
   |------------------------------------------------------------|
   |              Ground Type               |        JP1        |
   |----------------------------------------+-------------------|
   |   Frame and signal ground connected.   | Pin 1 & 2 closed. |
   |----------------------------------------+-------------------|
   |>> Frame and signal ground not          | Pin 2 & 3 closed. |
   | connected.                             |                   |
   +------------------------------------------------------------+

   +------------------------------------------------------------+
   |         FACTORY CONFIGURED SETTINGS - DO NOT ALTER         |
   |------------------------------------------------------------|
   |           Jumper           |            Setting            |
   |----------------------------+-------------------------------|
   |            JP8             |       Pin 2 & 3 closed.       |
   |----------------------------+-------------------------------|
   |            JP9             |       Pin 2 & 3 closed.       |
   |----------------------------+-------------------------------|
   |            JP10            |       Pin 2 & 3 closed.       |
   |----------------------------+-------------------------------|
   |            JP11            |       Pin 2 & 3 closed.       |
   +------------------------------------------------------------+

   +------------------------------------------------------------+
   |                           POWER                            |
   |------------------------------------------------------------|
   | Power Source |      JP2      |     JP3      |     JP4      |
   |--------------+---------------+--------------+--------------|
   |>> AC power.  |   Pin 1 & 2   |  Pin 1 & 2   |  Pin 1 & 2   |
   |              |    closed.    |   closed.    |   closed.    |
   |--------------+---------------+--------------+--------------|
   |  DC power.   |   Pin 2 & 3   |  Pin 2 & 3   |  Pin 2 & 3   |
   |              |    closed.    |   closed.    |   closed.    |
   +------------------------------------------------------------+

                     Proprietary AT Command Set

           See document V1409 for a full command summary.