NETCOMM LIMITED =============== THE OFFICIAL X-FILES MODEM 144 (MNP10EC) Card Type Modem (asynchronous) Chipset Unidentified Maximum Data Rate 14.4Kbps Maximum Fax Rate 14.4Kbps Data Modulation Bell 103A, 212A ITU-T V.21, V.22, V.22bis, V.23, V.32, V.32bis Fax Modulation ITU-T V.17, V.27ter, V.29 Error MNP5, MNP10EC, V.42, V.42bis Correction/Compression Fax Class Class I & II Data Bus Serial 53448 +------------------------------------------------------------+ | DIAGNOSTIC LED(S) | |------------------------------------------------------------| | LED | Color | Status | Condition | |--------+-------+----------+--------------------------------| | TM | Red | On | Modem is in test mode | |--------+-------+----------+--------------------------------| | TM | Red | Off | Modem is not in test mode | |--------+-------+----------+--------------------------------| | TD | Red | Blinking | Modem is transmitting data | |--------+-------+----------+--------------------------------| | TD | Red | Off | Modem is not transmitting data | |--------+-------+----------+--------------------------------| | RD | Red | Blinking | Modem is receiving data | |--------+-------+----------+--------------------------------| | RD | Red | Off | Modem is not receiving data | |--------+-------+----------+--------------------------------| | OH | Red | On | Modem is off-hook | |--------+-------+----------+--------------------------------| | OH | Red | Off | Modem is on-hook | |--------+-------+----------+--------------------------------| | CD | Red | On | Carrier signal detected | |--------+-------+----------+--------------------------------| | CD | Red | Off | Carrier signal not detected | |--------+-------+----------+--------------------------------| | AA | Red | On | Auto-answer enabled | |--------+-------+----------+--------------------------------| | AA | Red | Off | Auto-answer disabled | |--------+-------+----------+--------------------------------| | AA | Red | Blinking | Phone is ringing | |--------+-------+----------+--------------------------------| | TR | Red | On | DTR signal is high | |--------+-------+----------+--------------------------------| | TR | Red | Off | DTR signal is low | |--------+-------+----------+--------------------------------| | CP | Red | On | Compression enabled | |--------+-------+----------+--------------------------------| | CP | Red | Off | Compression disabled | |--------+-------+----------+--------------------------------| | EC | Red | On | Error correction enabled | |--------+-------+----------+--------------------------------| | EC | Red | Off | Error correction disabled | |--------+-------+----------+--------------------------------| | POWER | Red | On | Power is on | |--------+-------+----------+--------------------------------| | POWER | Red | Off | Power is off | +------------------------------------------------------------+ +-------------------------------+ | MISCELLANEOUS TECHNICAL NOTES | |-------------------------------| | Diagram not available. | +-------------------------------+ +------------------------------------------------------------+ | SUPPORTED STANDARD COMMANDS | |------------------------------------------------------------| | Basic AT Commands | |------------------------------------------------------------| | +++, 'comma', A/ | |------------------------------------------------------------| | A, B, E, H, L, M, N, O, P, Q, T, V, W, X, Y, Z | |------------------------------------------------------------| | &C, &D, &F, &G, &K, &Q, &R, &S, &V, &W, &Y, &Z | |------------------------------------------------------------| | Extended AT Commands | |------------------------------------------------------------| | \A, \B, \G, \L, \N, \V | |------------------------------------------------------------| | %C, %E, %L, %Q | |------------------------------------------------------------| | Special AT Commands | |------------------------------------------------------------| | :E, -K | |------------------------------------------------------------| | S-Registers | |------------------------------------------------------------| | S0, S1, S2, S3, S4, S5, S6, S7, S8, S9, S10, S11, S12, | | S18, S24, S25, S29, S30, S32, S33, S38 | |------------------------------------------------------------| | S48, S82, S86, S95 | |------------------------------------------------------------| | Note: See MHI help file for complete information. | +------------------------------------------------------------+ +------------------------------------------------------------+ | UNIDENTIFIED COMMANDS | |------------------------------------------------------------| | Command | Default | |----------------------------+-------------------------------| | \K | Unidentified | |----------------------------+-------------------------------| | *S | Unidentified | +------------------------------------------------------------+ Proprietary AT Command Set +------------------------------------------------------------+ | MNP10EC MODE | |------------------------------------------------------------| | Type: | Configuration | |--------------+---------------------------------------------| | Format: | AT [cmds] -SEC=n [cmds] | |--------------+---------------------------------------------| | Description: | Selects whether the modem will attempt to | | | use MNP10EC mode during the handshaking | | | sequence. | |------------------------------------------------------------| | Command | Function | |-----------------+------------------------------------------| | -SEC=0 | MNP10EC handshaking disabled unless a | | | V.34 connection is attempted via a | | | cellular line. | |-----------------+------------------------------------------| | i -SEC=1 | MNP10EC handshaking enabled. | +------------------------------------------------------------+ +------------------------------------------------------------+ | PROTOCOL/SPEED | |------------------------------------------------------------| | Type: | Configuration | |--------------+---------------------------------------------| | Format: | AT [cmds] Fn [cmds] | |--------------+---------------------------------------------| | Description: | Selects the protocol and speed the modem | | | will attempt to connect at. | |--------------+---------------------------------------------| | Command | Function | |--------------+---------------------------------------------| | F0 | Auto-detect the highest common connect | | | speed. | |--------------+---------------------------------------------| | F1 | Select V.21 or Bell 103 at 300bps speed. | |--------------+---------------------------------------------| | F3 | Select V.23 at 75/1200bps speed. | |--------------+---------------------------------------------| | F4 | Select V.22 or Bell 212A at 1200bps speed. | |--------------+---------------------------------------------| | F5 | Select V.22bis at 2400bps speed. | |--------------+---------------------------------------------| | F6 | Select V.32 or V.32bis at 4800bps speed. | |--------------+---------------------------------------------| | F7 | Select V.32bis at 7200bps speed. | |--------------+---------------------------------------------| | F8 | Select V.32bis or V.32 at 9600bps speed. | |--------------+---------------------------------------------| | F9 | Select V.32bis at 12Kbps speed. | |--------------+---------------------------------------------| | F10 | Select V.32bis at 14.4Kbps speed. | +------------------------------------------------------------+ See NETCOMM LIMITED THE OFFICIAL X-FILES MODEM 336 (MNP10) for a