MOTOROLA, INC. ============== VOICESURFR 14400 INTERNAL Card Type Modem (asynchronous)/Fax/Voice Chip Set Unidentified Maximum Data Rate 14.4Kbps Maximum Fax Rate 14.4Kbps Data Bus 8-bit ISA Fax Class Class I & II Data Modulation Bell 103A/212A Protocol ITU-T V.21, V.22, V.22bis, V.23, V.32, V.32bis Fax Modulation ITU-T V.17, V.21CH2, V.27ter, V.29 Protocol Error MNP5, V.42, V.42bis Correction/Compression +------------------------------------------------------------+ | CONNECTIONS | |------------------------------------------------------------| | Function | Label | Function | Label | |------------------------------------------------------------| | Line out | CN1 | Microphone | CN3 | |-----------------------------+----------+------------+------| | Line in | CN2 | Speaker | CN4 | +------------------------------------------------------------+ +------------------------------------------------------------+ | USER CONFIGURABLE SETTINGS | |------------------------------------------------------------| | Setting | Label | Position | |-----------------------------------------+-------+----------| | Factory configured - do not alter | JP2 | N/A | |-----------------------------------------+-------+----------| | Factory configured - do not alter | JP3 | N/A | +------------------------------------------------------------+ +------------------------------------------------------------+ | SERIAL PORT ADDRESS | |------------------------------------------------------------| | Setting | JP1 | |----------------------------+-------------------------------| | COM1 (3F8h) | Pins 3 & 4, 5 & 6 closed | |----------------------------+-------------------------------| | COM2 (2F8h) | Pins 1 & 2, 3 & 4 closed | |----------------------------+-------------------------------| | i COM3 (3E8h) | Pins 1 & 2, 5 & 6 closed | |----------------------------+-------------------------------| | COM4 (2E8h) | Pins 1 & 2, 4 & 6 closed | +------------------------------------------------------------+ +------------------------------------------------------------+ | INTERRUPT | |------------------------------------------------------------| | Setting | JP1 | |----------------------------+-------------------------------| | 3 | Pins 13 & 14 closed | |----------------------------+-------------------------------| | 4 | Pins 11 & 12 closed | |----------------------------+-------------------------------| | i 5 | Pins 9 & 10 closed | |----------------------------+-------------------------------| | 7 | Pins 7 & 8 closed | +------------------------------------------------------------+ Proprietary AT Command Set +------------------------------------------------------------+ | ACCEPT RELIABLE MODE | |------------------------------------------------------------| | Type: | Immediate | |--------------+---------------------------------------------| | Format: | AT [cmds] \U [cmds] | |--------------+---------------------------------------------| | Description: | Accepts remote modem's request for reliable | | | link | +------------------------------------------------------------+ +------------------------------------------------------------+ | AUTO FALL FORWARD/FALLBACK | |------------------------------------------------------------| | Type: | Configuration | |--------------+---------------------------------------------| | Format: | AT [cmds] %Gn [cmds] | |--------------+---------------------------------------------| | Description: | Selects auto fallback/fall forward | |--------------+---------------------------------------------| | Command | Function | |--------------+---------------------------------------------| | i %G0 | Fallback/fall forward disabled | |--------------+---------------------------------------------| | %G1 | Fallback/fall forward enabled | +------------------------------------------------------------+ +------------------------------------------------------------+ | AUTO-RELIABLE FALLBACK CHARACTER | |------------------------------------------------------------| | Type: | Configuration | |--------------+---------------------------------------------| | Format: | AT [cmds] %An [cmds] | |--------------+---------------------------------------------| | Default: | 0 | |--------------+---------------------------------------------| | Range: | 1-127 | |--------------+---------------------------------------------| | Unit: | ASCII | |--------------+---------------------------------------------| | Description: | Sets the character used as the | | | auto-reliable fallback character. %A0 will | | | disable this function. | +------------------------------------------------------------+ +------------------------------------------------------------+ | AUTO-RELIABLE TIME BUFFER CONFIGURATION | |------------------------------------------------------------| | Type: | Configuration | |--------------+---------------------------------------------| | Format: | AT [cmds] \Cn [cmds] | |--------------+---------------------------------------------| | Description: | Controls the handling of incoming data | | | during auto-reliable time period | |--------------+---------------------------------------------| | Command | Function | |--------------+---------------------------------------------| | i \CO | Data is discarded | |--------------+---------------------------------------------| | \C1 | Data is buffered for 4seconds or 200 | | | characters | |--------------+---------------------------------------------| | \C2 | Data is discarded, V.42 enhancement. | +------------------------------------------------------------+ +------------------------------------------------------------+ | AUTO-RETRAIN | |------------------------------------------------------------| | Type: | Configuration | |--------------+---------------------------------------------| | Format: | AT [cmds] %En [cmds] | |--------------+---------------------------------------------| | Description: | Selects auto-retrain mode | |--------------+---------------------------------------------| | Command | Function | |--------------+---------------------------------------------| | %E0 | Auto-retrain disabled | |--------------+---------------------------------------------| | i %E1 | Auto-retrain enabled | +------------------------------------------------------------+ +------------------------------------------------------------+ | BREAK SEND | |------------------------------------------------------------| | Type: | Configuration | |--------------+---------------------------------------------| | Format: | AT [cmds] \Bn [cmds] | |--------------+---------------------------------------------| | Default: | Unidentified | |--------------+---------------------------------------------| | Range: | 0-9 | |--------------+---------------------------------------------| | Unit: | .1 second | |--------------+---------------------------------------------| | Description: | Sends break to modem | +------------------------------------------------------------+ +------------------------------------------------------------+ | CALLER ID | |------------------------------------------------------------| | Type: | Configuration | |--------------+---------------------------------------------| | Format: | AT [cmds] #VCID=n [cmds] | |--------------+---------------------------------------------| | Description: | Controls Caller ID function | |--------------+---------------------------------------------| | Command | Function | |--------------+---------------------------------------------| | #VCID=0 | Caller ID disabled | |--------------+---------------------------------------------| | #VCID=1 | Caller ID enabled | +------------------------------------------------------------+ +------------------------------------------------------------+ | COMPRESSION | |------------------------------------------------------------| | Type: | Configuration | |--------------+---------------------------------------------| | Format: | AT [cmds] %Cn [cmds] | |--------------+---------------------------------------------| | Description: | Selects data compression | |--------------+---------------------------------------------| | Command | Function | |--------------+---------------------------------------------| | %C0 | Data compression disabled | |--------------+---------------------------------------------| | i %C1 | Data compression enabled | +------------------------------------------------------------+ +------------------------------------------------------------+ | CONNECT MODE | |------------------------------------------------------------| | Type: | Configuration | |--------------+---------------------------------------------| | Format: | AT [cmds] \Nn [cmds] | |--------------+---------------------------------------------| | Description: | Sets connect mode | |--------------+---------------------------------------------| | Command | Function | |--------------+---------------------------------------------| | \N0 | Normal mode | |--------------+---------------------------------------------| | \N1 | Direct mode | |--------------+---------------------------------------------| | \N2 | MNP reliable mode | |--------------+---------------------------------------------| | i \N3 | V.42 auto-reliable mode | |--------------+---------------------------------------------| | \N4 | V.42 reliable mode | +------------------------------------------------------------+ +------------------------------------------------------------+ | EXTENDED RESULT CODES | |------------------------------------------------------------| | Type: | Configuration | |--------------+---------------------------------------------| | Format: | AT [cmds] \Vn [cmds] | |--------------+---------------------------------------------| | Description: | Selects extended result codes | |--------------+---------------------------------------------| | Command | Function | |--------------+---------------------------------------------| | \V0 | CONNECT message displays modem to modem | | | speed | |--------------+---------------------------------------------| | \V1 | CONNECT message displays modem to modem | | | speed and error correction | |--------------+---------------------------------------------| | \V2 | CONNECT message displays modem to modem | | | speed and error correction | |--------------+---------------------------------------------| | i \V3 | CONNECT message displays computer to modem | | | speed | +------------------------------------------------------------+ +------------------------------------------------------------+ | FLOW CONTROL | |------------------------------------------------------------| | Type: | Configuration | |--------------+---------------------------------------------| | Format: | AT [cmds] \Gn [cmds] | |--------------+---------------------------------------------| | Description: | Selects modem port flow control | |--------------+---------------------------------------------| | Command | Function | |--------------+---------------------------------------------| | i \G0 | Flow control disabled | |--------------+---------------------------------------------| | \G1 | Flow control enabled | +------------------------------------------------------------+ +------------------------------------------------------------+ | FLOW CONTROL TYPE | |------------------------------------------------------------| | Type: | Configuration | |--------------+---------------------------------------------| | Format: | AT [cmds] \Qn [cmds] | |--------------+---------------------------------------------| | Description: | Sets type of flow control used by modem | |--------------+---------------------------------------------| | Command | Function | |--------------+---------------------------------------------| | \Q0 | Flow control disabled | |--------------+---------------------------------------------| | \Q1 | XON/XOFF flow control enabled | |--------------+---------------------------------------------| | \Q2 | CTS flow control to DTE enabled | |--------------+---------------------------------------------| | i \Q3 | RTS/CTS flow control enabled | +------------------------------------------------------------+ +------------------------------------------------------------+ | INACTIVITY TIMER | |------------------------------------------------------------| | Type | Configuration | |-------------+----------------------------------------------| | Format | AT [cmds] \Tn [cmds] | |-------------+----------------------------------------------| | Description | Controls the modem when it does not receive | | | information, then it disconnects. | |-------------+----------------------------------------------| | Command | Function | |-------------+----------------------------------------------| | i \T0 | Inactivity timer disabled | |-------------+----------------------------------------------| | \T1 | Inactivity timer enabled | +------------------------------------------------------------+ +------------------------------------------------------------+ | LINE SIGNAL QUALITY | |------------------------------------------------------------| | Type | Immediate | |-------------+----------------------------------------------| | Format | AT [cmds] %Q [cmds] | |-------------+----------------------------------------------| | Description | Reports line signal quality | |-------------+----------------------------------------------| | Value | Meaning | |-------------+----------------------------------------------| | 0 | Good | |-------------+----------------------------------------------| | 1 | Fair | |-------------+----------------------------------------------| | 2 | Poor | |-------------+----------------------------------------------| | 3 | Equalization lost | +------------------------------------------------------------+ +------------------------------------------------------------+ | LOCK SERIAL PORT | |------------------------------------------------------------| | Type: | Configuration | |--------------+---------------------------------------------| | Format: | AT [cmds] \Jn [cmds] | |--------------+---------------------------------------------| | Description: | Sets operation of serial port speed | |--------------+---------------------------------------------| | Command | Function | |--------------+---------------------------------------------| | i \J0 | Serial speed locked | |--------------+---------------------------------------------| | \J1 | Serial speed follows connect speed | +------------------------------------------------------------+ +------------------------------------------------------------+ | MAXIMUM BLOCK SIZE FOR TRANSMISSION | |------------------------------------------------------------| | Type: | Configuration | |--------------+---------------------------------------------| | Format: | AT [cmds] \An [cmds] | |--------------+---------------------------------------------| | Description: | Sets the maximum transmittable block size | | | for MNP | |--------------+---------------------------------------------| | Command | Function | |--------------+---------------------------------------------| | \A0 | MNP block size is 64 characters | |--------------+---------------------------------------------| | \A1 | MNP block size is 128 characters | |--------------+---------------------------------------------| | \A2 | MNP block size is 192 characters | |--------------+---------------------------------------------| | i \A3 | MNP block size is 256 characters | +------------------------------------------------------------+ +------------------------------------------------------------+ | MAXIMUM BLOCK SIZE FOR TRANSMISSION | |------------------------------------------------------------| | Type: | Configuration | |--------------+---------------------------------------------| | Format: | AT [cmds] "On [cmds] | |--------------+---------------------------------------------| | Description: | Sets the maximum transmittable block size | | | for LAPM | |--------------+---------------------------------------------| | Command | Function | |--------------+---------------------------------------------| | "O16 | LAPM block size is 16 characters | |--------------+---------------------------------------------| | "O64 | LAPM block size is 64 characters | |--------------+---------------------------------------------| | "O128 | LAPM block size is 128 characters | |--------------+---------------------------------------------| | i "O192 | LAPM block size is 192 characters | +------------------------------------------------------------+ +------------------------------------------------------------+ | ON-LINE IN RELIABLE MODE | |------------------------------------------------------------| | Type: | Immediate | |--------------+---------------------------------------------| | Format: | AT [cmds] \O [cmds] | |--------------+---------------------------------------------| | Description: | Returns to on-line and requests reliable | | | mode connection | +------------------------------------------------------------+ +------------------------------------------------------------+ | V.42bis COMPRESSION | |------------------------------------------------------------| | Type: | Configuration | |--------------+---------------------------------------------| | Format: | AT [cmds] "Hn [cmds] | |--------------+---------------------------------------------| | Description: | Controls V.42bis data compression | |--------------+---------------------------------------------| | Command | Function | |--------------+---------------------------------------------| | "H0 | V.42bis disabled | |--------------+---------------------------------------------| | i "H1 | V.42bis enabled | +------------------------------------------------------------+ +------------------------------------------------------------+ | XON/XOFF PASS-THROUGH | |------------------------------------------------------------| | Type: | Configuration | |--------------+---------------------------------------------| | Format: | AT [cmds] \Xn [cmds] | |--------------+---------------------------------------------| | Description: | Selects whether XON/XOFF signals are sent | | | to remote modem | |--------------+---------------------------------------------| | Command | Function | |--------------+---------------------------------------------| | i \X0 | XON/XOFF signals trapped by local modem | |--------------+---------------------------------------------| | \X1 | XON/XOFF passed through local modem | +------------------------------------------------------------+