GATEWAY 2000 ============ TELEPATH MODEM FOR WINDOWS WITH X2 Card Type Modem Chip Set Unidentified I/O Options Soundcard connector, serial ports (2 RJ-11) Maximum Modem Rate 56Kbps Maximum Fax Rate 14.4Kbps Data Modulation Bell 103A/212A, ITU-T V.21, V.22, Protocol V.22bis,V.32, V.32bis, V.34, V.FC Fax Modulation V.17, V.21, CH2, V.27ter, V.29 Protocol Error MNP5, V.42, V.42bis Correction/Compression Fax Class Class I & II Data Bus 8-bit ISA Card Size Half-length +------------------------------------------------------------+ | CONNECTIONS | |------------------------------------------------------------| | Function | Label | Function | Label | |------------------------------------------------------------| | Cable connector to sound | CN1 | RJ-11 | CN3 | | card | | telephone | | | | | out | | |-----------------------------+---------+--------------+-----| | RJ-11 telephone in | CN2 | | | +------------------------------------------------------------+ +------------------------------------------------------------+ | MISCELLANEOUS TECHNICAL NOTES | |------------------------------------------------------------| | A compatible sound card is necessary in order for the | | Speakerphone functions to operate properly. | +------------------------------------------------------------+ +------------------------------------------------------------+ | SUPPORTED COMMAND SET | |------------------------------------------------------------| | Basic AT Commands | |------------------------------------------------------------| | AT, '+++', 'comma', A/ | |------------------------------------------------------------| | A, B, E, F, H, M, O, P, R, T, V, X | |------------------------------------------------------------| | &C, &G,&P, &T,&X, &Z | |------------------------------------------------------------| | S Registers | |------------------------------------------------------------| | S0, S1, S2, S3, S4, S5, S6, S7, S8, S9, S10, S11, S12, | | S18, S38 | |------------------------------------------------------------| | | |------------------------------------------------------------| | Special Commands | |------------------------------------------------------------| | #CID | |------------------------------------------------------------| | Note: See MHI Help File for full command documentation. | +------------------------------------------------------------+ VOICE COMMAND SET (DSVD) +------------------------------------------------------------+ | QUEUEING DELAY | |------------------------------------------------------------| | Type: | Configuration | |--------------+---------------------------------------------| | Format: | AT [cmds] -SAD=n [cmds] | |--------------+---------------------------------------------| | Values: | 1,2,3,4 | |--------------+---------------------------------------------| | Description: | Selects max queuing delay of audio samples. | +------------------------------------------------------------+ +------------------------------------------------------------+ | INPUT SOURCE | |------------------------------------------------------------| | Type: | Configuration | |--------------+---------------------------------------------| | Format: | AT [cmds] -SAT=n [cmds] | |--------------+---------------------------------------------| | Description: | Selects input source. | |--------------+---------------------------------------------| | Command | Function | |--------------+---------------------------------------------| | SAT=0 | Selects handset | |--------------+---------------------------------------------| | SAT=1 | Selects speaker-microphone | +------------------------------------------------------------+ +------------------------------------------------------------+ | HANDSET MICROPHONE GAIN | |------------------------------------------------------------| | Type: | Configuration | |--------------+---------------------------------------------| | Format: | AT [cmds] -SHG=n [cmds] | |--------------+---------------------------------------------| | Description: | Selects handset microphone gain. | |--------------+---------------------------------------------| | Command | Function | |--------------+---------------------------------------------| | SHG=0 | Low gain | |--------------+---------------------------------------------| | SHG=2 | High gain | +------------------------------------------------------------+ +------------------------------------------------------------+ | HANDSET VOLUME | |------------------------------------------------------------| | Type: | Configuration | |--------------+---------------------------------------------| | Format: | AT [cmds] -SHV=n [cmds] | |--------------+---------------------------------------------| | Description: | Selects handset volume. | |--------------+---------------------------------------------| | Command | Function | |--------------+---------------------------------------------| | SHV=0 | Low gain | |--------------+---------------------------------------------| | SHV=3 | High gain | +------------------------------------------------------------+ +------------------------------------------------------------+ | MCROPHONE JACK GAIN | |------------------------------------------------------------| | Type: | Configuration | |--------------+---------------------------------------------| | Format: | AT [cmds] -SMG=n [cmds] | |--------------+---------------------------------------------| | Description: | Selects handset microphone gain. | |--------------+---------------------------------------------| | Command | Function | |--------------+---------------------------------------------| | SMG=0 | Low gain | |--------------+---------------------------------------------| | SMG=2 | High gain | +------------------------------------------------------------+ +------------------------------------------------------------+ | MUTE INTERNAL SPEAKER | |------------------------------------------------------------| | Type: | Configuration | |--------------+---------------------------------------------| | Format: | AT [cmds] -SMUTE=n [cmds] | |--------------+---------------------------------------------| | Description: | Enables/disables internal speaker. | |--------------+---------------------------------------------| | Command | Function | |--------------+---------------------------------------------| | SMUTE=0 | Speaker enabled | |--------------+---------------------------------------------| | SMUTE=1 | Speaker disabled | +------------------------------------------------------------+ +------------------------------------------------------------+ | INTERNAL SPEAKER AUDIO SOURCE | |------------------------------------------------------------| | Type: | Configuration | |--------------+---------------------------------------------| | Format: | AT [cmds] -SMUX=n [cmds] | |--------------+---------------------------------------------| | Description: | Selects audio source for internal speaker. | |--------------+---------------------------------------------| | Command | Function | |--------------+---------------------------------------------| | SMUX=0 | Selects data source | |--------------+---------------------------------------------| | SMUX=1 | Selects audio source | +------------------------------------------------------------+ +------------------------------------------------------------+ | QUERY AUXILIARY PHONE HOOK STATUS | |------------------------------------------------------------| | Type: | Configuration | |--------------+---------------------------------------------| | Format: | AT [cmds] -SPH? [cmds] | |--------------+---------------------------------------------| | Description: | Queries auxiliary phone hook status | +------------------------------------------------------------+ +------------------------------------------------------------+ | AUDIO BLOCKING FACTOR | |------------------------------------------------------------| | Type: | Configuration | |--------------+---------------------------------------------| | Format: | AT [cmds] -SSB=n [cmds] | |--------------+---------------------------------------------| | Description: | Selects audio blocking factor (#frames per | | | V.42 packet). | +------------------------------------------------------------+ +------------------------------------------------------------+ | DSVD MODE | |------------------------------------------------------------| | Type: | Configuration | |--------------+---------------------------------------------| | Format: | AT [cmds] -SSE=n [cmds] | |--------------+---------------------------------------------| | Description: | Selects whether the modem will use DSVD | | | mode. | |--------------+---------------------------------------------| | Command | Function | |--------------+---------------------------------------------| | i -SSE=0 | DSVD mode disabled. | |--------------+---------------------------------------------| | -SSE=1 | DSVD mode enabled. | +------------------------------------------------------------+ +------------------------------------------------------------+ | AUDIO SEQUENCE NUMBERS | |------------------------------------------------------------| | Type: | Configuration | |--------------+---------------------------------------------| | Format: | AT [cmds] -SSN=n [cmds] | |--------------+---------------------------------------------| | Description: | Enables audio sequence numbers. | |--------------+---------------------------------------------| | Command | Function | |--------------+---------------------------------------------| | i -SSN=0 | Audio sequence numbers disabled. | |--------------+---------------------------------------------| | -SSN=1 | Audio sequence numbers enabled. | +------------------------------------------------------------+ +------------------------------------------------------------+ | SPEAKER JACK VOLUME | |------------------------------------------------------------| | Type: | Configuration | |--------------+---------------------------------------------| | Format: | AT [cmds] -SSV=n [cmds] | |--------------+---------------------------------------------| | Description: | Selects speaker jack volume. | |--------------+---------------------------------------------| | Command | Function | |--------------+---------------------------------------------| | SSV=0 | Low gain | |--------------+---------------------------------------------| | SSV=3 | High gain | +------------------------------------------------------------+ For a full command summary, see GATEWAY 2000, TELEPATH WITH X2 TECHNOLOGY.