ELSA, INC. ========== MICROLINK 33.6TS Card Type Modem (asynchronous) Chipset Unidentified I/O Options Voice Maximum Data Rate 28.8Kbps Maximum Fax Rate 14.4Kbps Data Modulation Bell 103A, 212A ITU-T V.21, V.22bis, V.23, V.32, V.32bis, V.34 Rockwell V.FC Fax Modulation ITU-T V.17, V.27ter, V.29, V.33 Error MNP5, V.42, V.42bis Correction/Compression Fax Class Class I & II Data Bus Serial +------------------------------------------------------------+ | CONNECTIONS | |------------------------------------------------------------| | Function | Label | Function | Label | |------------------------+-------+-------------------+-------| | Telephone line in | CN1 | Serial port | CN5 | |------------------------+-------+-------------------+-------| | Telephone line out | CN2 | DC power in | CN6 | |------------------------+-------+-------------------+-------| | Microphone in | CN3 | Power switch | SW1 | |------------------------+-------+-------------------+-------| | Speaker out | CN4 | | | +------------------------------------------------------------+ +------------------------------------------------------------+ | DIAGNOSTIC LED(S) | |------------------------------------------------------------| | LED | Color | Status | Condition | |--------+--------+---------+--------------------------------| | POWER | Red | On | Power is on | |--------+--------+---------+--------------------------------| | POWER | Red | Off | Power is off | |--------+--------+---------+--------------------------------| | TXD | Red | On | Modem is transmitting data | |--------+--------+---------+--------------------------------| | TXD | Red | Off | Modem is not transmitting data | |--------+--------+---------+--------------------------------| | RXD | Red | On | Modem is receiving data | |--------+--------+---------+--------------------------------| | RXD | Red | Off | Modem is not receiving data | |--------+--------+---------+--------------------------------| | DTR | Red | On | DTR signal is high | |--------+--------+---------+--------------------------------| | DTR | Red | Off | DTR signal is low | |--------+--------+---------+--------------------------------| | DSR | Red | On | DSR signal is high | |--------+--------+---------+--------------------------------| | DSR | Red | Off | DSR signal is low | |--------+--------+---------+--------------------------------| | RTS | Red | On | RTS signal is high | |--------+--------+---------+--------------------------------| | RTS | Red | Off | RTS signal is low | +------------------------------------------------------------+ +------------------------------------------------------------+ | DIAGNOSTIC LED(S) (CON'T) | |------------------------------------------------------------| | LED | Color | Status | Condition | |-------+---------+----------+-------------------------------| | CTS | Red | On | CTS signal is high | |-------+---------+----------+-------------------------------| | CTS | Red | Off | CTS signal is low | |-------+---------+----------+-------------------------------| | DCD | Red | On | Carrier signal detected | |-------+---------+----------+-------------------------------| | DCD | Red | Off | Carrier signal not detected | |-------+---------+----------+-------------------------------| | OH | Red | On | Modem is off-hook | |-------+---------+----------+-------------------------------| | OH | Red | Off | Modem is on-hook | +------------------------------------------------------------+ +------------------------------------------------------------+ | SUPPORTED STANDARD COMMANDS | |------------------------------------------------------------| | Basic AT Commands | |------------------------------------------------------------| | +++, 'comma', A/ | |------------------------------------------------------------| | A, B, E, H, L, M, O, P, T, V, X, Z | |------------------------------------------------------------| | &D, &F, &S, &T, &V, &W, &Y, &Z | |------------------------------------------------------------| | Extended AT Commands | |------------------------------------------------------------| | \C, \J, \K, \N, \Q, \T, \X | |------------------------------------------------------------| | %A, %C, %E | |------------------------------------------------------------| | Special AT Commands | |------------------------------------------------------------| | -J | |------------------------------------------------------------| | S-Registers | |------------------------------------------------------------| | S0, S1, S2, S3, S4, S5, S6, S7, S8, S10, S11, S12, S16, | | S21, S22, S25, S30, S38 | |------------------------------------------------------------| | Note: See MHI help file for complete information. | +------------------------------------------------------------+ Proprietary AT Command Set +------------------------------------------------------------+ | MODE SELECTION | |------------------------------------------------------------| | Type: | Immediate | |--------------+---------------------------------------------| | Format: | AT [cmds] #CLS=n [cmds] | |--------------+---------------------------------------------| | Description: | Selects which mode the modem will operate | | | in. | |--------------+---------------------------------------------| | Command | Function | |--------------+---------------------------------------------| | #CLS=0 | Modem will operate in data mode. | |--------------+---------------------------------------------| | #CLS=1 | Modem will operate in fax class 1 mode. | |--------------+---------------------------------------------| | #CLS=2 | Modem will operate in fax class 2 mode. | |--------------+---------------------------------------------| | #CLS=8 | Modem will operate in voice mode. | +------------------------------------------------------------+ +------------------------------------------------------------+ | SPEAKERPHONE OPTIONS | |------------------------------------------------------------| | Type: | Configuration | |--------------+---------------------------------------------| | Format: | AT [cmds] #SPK=x,y,z [cmds] | |--------------+---------------------------------------------| | Description: | Sets various options for speakerphone | | | functions. | |------------------------------------------------------------| | Command | Function | |---------------+--------------------------------------------| | x=0 | Microphone enabled. | |---------------+--------------------------------------------| | x=1 | Microphone disabled. | |---------------+--------------------------------------------| | x=2 | Microphone enabled with maximum gain, | | | speaker disabled. | |---------------+--------------------------------------------| | y | Default: | 5 | |---------------+--------------+-----------------------------| | | Range: | 0 - 16 | |---------------+--------------+-----------------------------| | | Unit: | -2 dBm | |---------------+--------------+-----------------------------| | | Description: | Sets the attenuation level | | | | for speaker output in voice | | | | mode. A value of 16 will | | | | mute the speaker. | |---------------+--------------------------------------------| | z=0 | Microphone gain set to 0 dBm. | |---------------+--------------------------------------------| | z=1 | Microphone gain set to 6 dBm. | |---------------+--------------------------------------------| | z=2 | Microphone gain set to 9.5 dBm. | |---------------+--------------------------------------------| | z=3 | Microphone gain set to 12 dBm. | +------------------------------------------------------------+ +------------------------------------------------------------+ | VOICE DEVICE | |------------------------------------------------------------| | Type: | Configuration | |--------------+---------------------------------------------| | Format: | AT [cmds] #VLS=n [cmds] | |--------------+---------------------------------------------| | Description: | Selects the I/O device for the DSP chip. | |--------------+---------------------------------------------| | Note: | This modem may not support all options | | | listed below. The #VLS? command will | | | display the available options. | |--------------+---------------------------------------------| | Command | Function | |--------------+---------------------------------------------| | i #VLS=0 | Telephone line and handset used for voice | | | I/O. | |--------------+---------------------------------------------| | #VLS=1 | Telephone handset used for voice I/O. | |--------------+---------------------------------------------| | #VLS=2 | Internal speaker only used for voice I/O. | |--------------+---------------------------------------------| | #VLS=3 | External microphone only used for voice | | | I/O. | |--------------+---------------------------------------------| | #VLS=4 | Telephone line and handset used for voice | | | I/O; internal speaker enabled. | |--------------+---------------------------------------------| | #VLS=5 | Headset used for voice I/O. | |--------------+---------------------------------------------| | #VLS=6 | Speakerphone used for voice I/O. | |--------------+---------------------------------------------| | #VLS=7 | Handset muted by disconnecting handset or | | | speakerphone from telephone line. | |--------------+---------------------------------------------| | #VLS=8 | Connects caller ID relay for recording of | | | conversation over handset. | |--------------+---------------------------------------------| | #VLS=9 | Connects handset (or speakerphone) to DSP | | | chip for recording or playback. | +------------------------------------------------------------+ See ELSA, INC. MICROLINK 33.6TQV for a full command summary.