EVEREX SYSTEMS, INC. ==================== EMAC-MD1200 (EV-936) Card Type Modem (asynchronous) Chipset Unidentified I/O Options Speakerphone Maximum Data Rate 1200bps Data Modulation Bell 103A/212A ITU-T V.21, V.22 Error Correction/Compression None Data Bus Serial +------------------------------------------------------------+ | CONNECTIONS | |------------------------------------------------------------| | Function | Label | Function | Label | |------------------------+-------+-------------------+-------| | Speakerphone button | BT1 | DC power in | CN4 | |------------------------+-------+-------------------+-------| | Mute button | BT2 | Microphone | MIC | |------------------------+-------+-------------------+-------| | Telephone line out | CN1 | Volume control | R1 | |------------------------+-------+-------------------+-------| | Telephone line in | CN2 | Power switch | SW2 | |------------------------+-------+-------------------+-------| | RS-232/422 port | CN3 | | | +------------------------------------------------------------+ +------------------------------------------------------------+ | USER CONFIGURABLE SETTINGS | |------------------------------------------------------------| | Setting | Label | Position | |-----------------------------------------+-------+----------| | i Modem ignores DTR | SW1/1 | Off | |-----------------------------------------+-------+----------| | Modem disconnects and does not accept | SW1/1 | On | | commands on low DTR; auto-answer is | | | | disabled | | | |-----------------------------------------+-------+----------| | i Verbose result code format enabled. | SW1/2 | Off | |-----------------------------------------+-------+----------| | Numeric result code format enabled. | SW1/2 | On | |-----------------------------------------+-------+----------| | i Result codes enabled | SW1/3 | Off | |-----------------------------------------+-------+----------| | Result codes disabled | SW1/3 | On | |-----------------------------------------+-------+----------| | i Command echo enabled | SW1/4 | Off | |-----------------------------------------+-------+----------| | Command echo disabled | SW1/4 | On | |-----------------------------------------+-------+----------| | i Auto-answer disabled | SW1/5 | Off | |-----------------------------------------+-------+----------| | Auto-answer after first ring | SW1/5 | On | |-----------------------------------------+-------+----------| | i CD signal forced high | SW1/6 | Off | |-----------------------------------------+-------+----------| | CD signal normal | SW1/6 | On | |-----------------------------------------+-------+----------| | i Modem is connected to RJ-11 or RJ-14 | SW1/7 | Off | | jack | | | |-----------------------------------------+-------+----------| | Modem is connected to RJ-12 or RJ-13 | SW1/7 | On | | jack | | | |-----------------------------------------+-------+----------| | i Command set enabled | SW1/8 | Off | |-----------------------------------------+-------+----------| | Command set disabled | SW1/8 | On | |-----------------------------------------+-------+----------| | i Modem uses Bell 212A at 1200bps | SW1/9 | Off | |-----------------------------------------+-------+----------| | Modem uses ITU-T V.22 at 1200bps | SW1/9 | On | +------------------------------------------------------------+ +------------------------------------------------------------+ | DIAGNOSTIC LED(S) | |------------------------------------------------------------| | LED | Color | Status | Condition | |-----+-------+----------+-----------------------------------| | SPL | Red | On | Modem is in speakerphone mode | |-----+-------+----------+-----------------------------------| | SPL | Red | Off | Modem is not in speakerphone mode | |-----+-------+----------+-----------------------------------| | ML | Red | On | Speakerphone is muted | |-----+-------+----------+-----------------------------------| | ML | Red | Off | Speakerphone is not muted | |-----+-------+----------+-----------------------------------| | RI | Red | On | Phone is ringing | |-----+-------+----------+-----------------------------------| | RI | Red | Off | Phone is not ringing | |-----+-------+----------+-----------------------------------| | HS | Red | On | Modem is operating at 1200bps | |-----+-------+----------+-----------------------------------| | HS | Red | Off | Modem is operating at 300bps | |-----+-------+----------+-----------------------------------| | AA | Red | On | Auto-answer enabled | |-----+-------+----------+-----------------------------------| | AA | Red | Off | Auto-answer disabled | |-----+-------+----------+-----------------------------------| | CD | Red | On | Carrier signal detected | |-----+-------+----------+-----------------------------------| | CD | Red | Off | Carrier signal not detected | |-----+-------+----------+-----------------------------------| | OH | Red | On | Modem is off-hook | |-----+-------+----------+-----------------------------------| | OH | Red | Off | Modem is on-hook | |-----+-------+----------+-----------------------------------| | RD | Red | Blinking | Modem is receiving data | |-----+-------+----------+-----------------------------------| | RD | Red | Off | Modem is not receiving data | |-----+-------+----------+-----------------------------------| | TD | Red | Blinking | Modem is transmitting data | |-----+-------+----------+-----------------------------------| | TD | Red | Off | Modem is not transmitting data | |-----+-------+----------+-----------------------------------| | TR | Red | On | DTR signal is high | |-----+-------+----------+-----------------------------------| | TR | Red | Off | DTR signal is low | |-----+-------+----------+-----------------------------------| | MR | Red | On | Power is on | |-----+-------+----------+-----------------------------------| | MR | Red | Off | Power is off | +------------------------------------------------------------+ +------------------------------------------------------------+ | SUPPORTED STANDARD COMMANDS | |------------------------------------------------------------| | Basic AT Commands | |------------------------------------------------------------| | +++, 'comma', A/ | |------------------------------------------------------------| | A, B, E, F, H, L, M, O, Q, V, X, Y, Z | |------------------------------------------------------------| | &C, &D, &G, &L, &P, &T | |------------------------------------------------------------| | S-Registers | |------------------------------------------------------------| | S0, S1, S2, S3, S4, S5, S6, S7, S8, S9, S10, S11, S12, | | S14, S18, S21, S22, S23, S27 | |------------------------------------------------------------| | Note: See MHI help file for complete information. | +------------------------------------------------------------+ Proprietary AT Command Set +------------------------------------------------------------+ | TRANSMIT EQUALIZATION | |------------------------------------------------------------| | Type: | Configuration | |--------------+---------------------------------------------| | Format: | AT [cmds] Un [cmds] | |--------------+---------------------------------------------| | Description: | Selects how much transmit equalization the | | | modem will use. | |--------------+---------------------------------------------| | Command | Function | |--------------+---------------------------------------------| | U0 | Modem will use the average amount of | | | transmit equalization. | |--------------+---------------------------------------------| | U1 | Modem will use the maximum amount of | | | transmit equalization. | |--------------+---------------------------------------------| | i U2 | Modem auto-detects correct amount of | | | transmit equalization during handshaking. | +------------------------------------------------------------+ See EVEREX SYSTEMS, INC EMAC-MD2400 (EV-945) for a full command summary.