E-TECH RESEARCH, INC.
=====================

   C1414AX PCMCIA

   Card Type              Modem(synchronous/asynchronous)         
   Chip Set               Unidentified                            
   Maximum Data Rate      14.4Kbps                                
   Maximum Fax Rate       14.4Kbps                                
   Data Bus               PCMCIA                                  
   Fax Class              Class I & II                            
   Data Modulation        Bell 103A/212A                          
   Protocol                                                       
                          ITU-T V.21, V.22, V.22bis, V.23, V.32,  
                          V.32bis                                 
   Fax Modulation         ITU-T V.17, V.21CH2, V.27ter, V.29      
   Protocol               
   Error                  MNP5, V.42, V.42bis                     
   Correction/Compression 

                     Proprietary AT Command Set

                                                            V1795

   +------------------------------------------------------------+
   |                     BITS PER CHARACTER                     |
   |------------------------------------------------------------|
   | Type:        | Configuration                               |
   |--------------+---------------------------------------------|
   | Format:      | AT [cmds] $Ln [cmds]                        |
   |--------------+---------------------------------------------|
   | Description: | Controls bits per character                 |
   |------------------------------------------------------------|
   |     Command      |                Function                 |
   |------------------+-----------------------------------------|
   |       $L0        | 8 bits per character                    |
   |------------------+-----------------------------------------|
   |       $L1        | 9 bits per character                    |
   |------------------+-----------------------------------------|
   |      i $L2       | 10 bits per character                   |
   |------------------+-----------------------------------------|
   |       $L3        | 11 bits per character                   |
   +------------------------------------------------------------+

   +------------------------------------------------------------+
   |                       CARRIER DETECT                       |
   |------------------------------------------------------------|
   | Type:        | Configuration                               |
   |--------------+---------------------------------------------|
   | Format:      | AT [cmds] &Cn [cmds]                        |
   |--------------+---------------------------------------------|
   | Description: | Controls DCD, Computer Systems Interface    |
   |              | and Port Contender                          |
   |------------------------------------------------------------|
   |    Command    |                  Function                  |
   |---------------+--------------------------------------------|
   |      &C0      | DCD forced high                            |
   |---------------+--------------------------------------------|
   |     i &C1     | DCD follows remote modem                   |
   |---------------+--------------------------------------------|
   |      &C2      | Conforms to Computer Systems Interface     |
   |---------------+--------------------------------------------|
   |      &C3      | Conforms to Port Contender                 |
   +------------------------------------------------------------+

   +------------------------------------------------------------+
   |                   CLEAR DOWN/DISCONNECT                    |
   |------------------------------------------------------------|
   | Type:        | Configuration                               |
   |--------------+---------------------------------------------|
   | Format:      | AT [cmds] Yn [cmds]                         |
   |--------------+---------------------------------------------|
   | Description: | Controls long space disconnect and V.32     |
   |              | clear down                                  |
   |------------------------------------------------------------|
   |    Command    |                  Function                  |
   |---------------+--------------------------------------------|
   |     i Y0      | Long space disconnect disabled             |
   |---------------+--------------------------------------------|
   |      Y1       | Long space disconnect enabled              |
   |---------------+--------------------------------------------|
   |      Y2       | V.32 clear down enabled                    |
   |---------------+--------------------------------------------|
   |      Y3       | V.32 clear down and long space disconnect  |
   |               | enabled                                    |
   +------------------------------------------------------------+

   +------------------------------------------------------------+
   |                        COMPRESSION                         |
   |------------------------------------------------------------|
   | Type:        | Configuration                               |
   |--------------+---------------------------------------------|
   | Format:      | AT [cmds] $Cn [cmds]                        |
   |--------------+---------------------------------------------|
   | Description: | Controls data compression                   |
   |------------------------------------------------------------|
   |    Command     |                 Function                  |
   |----------------+-------------------------------------------|
   |      $C0       | Data compression disabled                 |
   |----------------+-------------------------------------------|
   |     i $C1      | Data compression enabled                  |
   +------------------------------------------------------------+

   +------------------------------------------------------------+
   |                   CONNECT/SPEED MESSAGE                    |
   |------------------------------------------------------------|
   | Type:        | Configuration                               |
   |--------------+---------------------------------------------|
   | Format:      | AT [cmds] $Xn [cmds]                        |
   |--------------+---------------------------------------------|
   | Description: | Controls connect and speed message          |
   |              | displayed                                   |
   |------------------------------------------------------------|
   |    Command    |                  Function                  |
   |---------------+--------------------------------------------|
   |      $X0      | Normal connect and DCE speed message       |
   |               | enabled                                    |
   |---------------+--------------------------------------------|
   |      $X1      | Normal connect and DTE speed message       |
   |               | enabled                                    |
   |---------------+--------------------------------------------|
   |     i $X2     | Extended connect and DCE speed message     |
   |               | enabled                                    |
   |---------------+--------------------------------------------|
   |      $X3      | Extended connect and DTE speed message     |
   |               | enabled                                    |
   +------------------------------------------------------------+

   +------------------------------------------------------------+
   |                       DIAL INTERRUPT                       |
   |------------------------------------------------------------|
   | Type:        | Configuration                               |
   |--------------+---------------------------------------------|
   | Format:      | AT [cmds] $Kn [cmds]                        |
   |--------------+---------------------------------------------|
   | Description: | Controls dial interrupt                     |
   |------------------------------------------------------------|
   |    Command     |                 Function                  |
   |----------------+-------------------------------------------|
   |      $K0       | Dial interrupt disabled                   |
   |----------------+-------------------------------------------|
   |     i $K1      | Dial interrupt enabled                    |
   +------------------------------------------------------------+

   +------------------------------------------------------------+
   |                 DISPLAY STORED INFORMATION                 |
   |------------------------------------------------------------|
   | Type:        | Configuration                               |
   |--------------+---------------------------------------------|
   | Format:      | AT [cmds] &Vn [cmds]                        |
   |--------------+---------------------------------------------|
   | Description: | Displays stored phone numbers,              |
   |              | configuration profiles and S registers      |
   |------------------------------------------------------------|
   |    Command    |                  Function                  |
   |---------------+--------------------------------------------|
   |      &V0      | Display stored phone numbers               |
   |---------------+--------------------------------------------|
   |      &V1      | Display current configuration profiles     |
   |---------------+--------------------------------------------|
   |      &V2      | Display contents of S registers            |
   |---------------+--------------------------------------------|
   |      &V3      | Display stored profiles briefly            |
   +------------------------------------------------------------+

   +------------------------------------------------------------+
   |                         DSR SIGNAL                         |
   |------------------------------------------------------------|
   | Type:        | Configuration                               |
   |--------------+---------------------------------------------|
   | Format:      | AT [cmds] &Sn [cmds]                        |
   |--------------+---------------------------------------------|
   | Description: | Controls DSR, Computer Systems Interface    |
   |              | and Port Contender                          |
   |------------------------------------------------------------|
   |    Command    |                  Function                  |
   |---------------+--------------------------------------------|
   |     i &S0     | DSR forced high                            |
   |---------------+--------------------------------------------|
   |      &S1      | DSR follows remote modem                   |
   |---------------+--------------------------------------------|
   |      &S2      | Conforms to Computer Systems Interface     |
   |---------------+--------------------------------------------|
   |      &S3      | Conforms to Port Contender                 |
   +------------------------------------------------------------+

   +------------------------------------------------------------+
   |                        FLOW CONTROL                        |
   |------------------------------------------------------------|
   | Type:        | Configuration                               |
   |--------------+---------------------------------------------|
   | Format:      | AT [cmds] $Fn [cmds]                        |
   |--------------+---------------------------------------------|
   | Description: | Controls XON/XOFF, ENQ/ACK, DTR/DSR AND     |
   |              | CTS/RTS flow control                        |
   |------------------------------------------------------------|
   |      Command       |               Function                |
   |--------------------+---------------------------------------|
   |        $F0         | XON/XOFF enabled                      |
   |--------------------+---------------------------------------|
   |        $F1         | XON/XOFF passthrough enabled          |
   |--------------------+---------------------------------------|
   |        $F2         | ENQ/ACK enabled                       |
   |--------------------+---------------------------------------|
   |        $F3         | DTR/DSR enabled                       |
   |--------------------+---------------------------------------|
   |       i $F4        | CTS/RTS enabled                       |
   |--------------------+---------------------------------------|
   |        $F5         | Flow control disabled                 |
   +------------------------------------------------------------+

   +------------------------------------------------------------+
   |                         LINE SPEED                         |
   |------------------------------------------------------------|
   | Type:        | Configuration                               |
   |--------------+---------------------------------------------|
   | Format:      | AT [cmds] &Ln [cmds]                        |
   |--------------+---------------------------------------------|
   | Description: | Controls speed at which modem attempts to   |
   |              | connect                                     |
   |------------------------------------------------------------|
   |       Command       |               Function               |
   |---------------------+--------------------------------------|
   |        i &L0        | Line speed follows DTE speed         |
   |---------------------+--------------------------------------|
   |         &L1         | Connect at V.23 75/1200bps           |
   |---------------------+--------------------------------------|
   |         &L2         | Not used                             |
   |---------------------+--------------------------------------|
   |         &L3         | Connect at 300bps                    |
   |---------------------+--------------------------------------|
   |         &L4         | Not used                             |
   |---------------------+--------------------------------------|
   |         &L5         | Connect at 1200bps                   |
   |---------------------+--------------------------------------|
   |         &L6         | Connect at 2400bps                   |
   |---------------------+--------------------------------------|
   |         &L7         | Connect at 4800bps                   |
   |---------------------+--------------------------------------|
   |         &L8         | Connect at 7200bps                   |
   |---------------------+--------------------------------------|
   |         &L9         | Connect at 9600bps                   |
   +------------------------------------------------------------+

   +------------------------------------------------------------+
   |                          PROTOCOL                          |
   |------------------------------------------------------------|
   | Type:        | Configuration                               |
   |--------------+---------------------------------------------|
   | Format:      | AT [cmds] $En [cmds]                        |
   |--------------+---------------------------------------------|
   | Description: | Controls protocol used                      |
   |------------------------------------------------------------|
   |      Command      |                Function                |
   |-------------------+----------------------------------------|
   |        $E0        | Normal mode                            |
   |-------------------+----------------------------------------|
   |        $E1        | Auto MNP mode                          |
   |-------------------+----------------------------------------|
   |        $E2        | MNP mode                               |
   |-------------------+----------------------------------------|
   |       i $E3       | Auto V.42 mode                         |
   |-------------------+----------------------------------------|
   |        $E4        | LAPM mode                              |
   +------------------------------------------------------------+

   +------------------------------------------------------------+
   |                       RETRAIN LIMIT                        |
   |------------------------------------------------------------|
   | Type:        | Configuration                               |
   |--------------+---------------------------------------------|
   | Format:      | AT [cmds] &En [cmds]                        |
   |--------------+---------------------------------------------|
   | Description: | Controls number of retrains per minute      |
   |              | allowed                                     |
   |------------------------------------------------------------|
   |    Command     |                 Function                  |
   |----------------+-------------------------------------------|
   |     i &E0      | Disconnect If more than four retrain      |
   |                | attempts in three minutes                 |
   |----------------+-------------------------------------------|
   |      &E1       | Disconnect If more than four retrain      |
   |                | attempts in four minutes                  |
   |----------------+-------------------------------------------|
   |      &E2       | Disconnect If more than four retrain      |
   |                | attempts in five minutes                  |
   |----------------+-------------------------------------------|
   |      &E3       | Unlimited retrain allowed                 |
   |----------------+-------------------------------------------|
   |      &E4       | Retrain disabled                          |
   +------------------------------------------------------------+

   +------------------------------------------------------------+
   |                      SPEED CONVERSION                      |
   |------------------------------------------------------------|
   | Type:        | Configuration                               |
   |--------------+---------------------------------------------|
   | Format:      | AT [cmds] $Sn [cmds]                        |
   |--------------+---------------------------------------------|
   | Description: | Controls speed conversion                   |
   |------------------------------------------------------------|
   |    Command     |                 Function                  |
   |----------------+-------------------------------------------|
   |     i $S0      | Speed conversion enabled                  |
   |----------------+-------------------------------------------|
   |      $S8       | Speed conversion disabled                 |
   +------------------------------------------------------------+

   +------------------------------------------------------------+
   |                     TRANSMISSION LEVEL                     |
   |------------------------------------------------------------|
   | Type:        | Configuration                               |
   |--------------+---------------------------------------------|
   | Format:      | AT [cmds] $Tn [cmds]                        |
   |--------------+---------------------------------------------|
   | Description: | Controls transmission level                 |
   |------------------------------------------------------------|
   |         Command         |             Function             |
   |-------------------------+----------------------------------|
   |        $T0 - $T2        | -4dBm                            |
   |-------------------------+----------------------------------|
   |         i -$T3          | -6dBm                            |
   |-------------------------+----------------------------------|
   |           $T4           | -8dBm                            |
   |-------------------------+----------------------------------|
   |           $T5           | -10dBm                           |
   |-------------------------+----------------------------------|
   |           $T6           | -12dBm                           |
   |-------------------------+----------------------------------|
   |           $T7           | -14dBm                           |
   |-------------------------+----------------------------------|
   |           $T8           | -16dBm                           |