DIGICOM SPA =========== TINTORETTO PCMCIA Card Type ISDN TA Chip Set Unidentified ISDN Rate 128Kbps ISDN Modulation Protocol V.110, V.120 Error Correction/Compression V.42bis Data Bus PCMCIA 55061 +------------------------------------------------------------+ | USER CONFIGURABLE SETTINGS | |------------------------------------------------------------| | Setting | Label | Position | |-----------------------------------------+-------+----------| | i Transmission channel in high | J2 | Open | | impedence mode | | | |-----------------------------------------+-------+----------| | Transmit termination set to 100Ohm | J2 | Closed | |-----------------------------------------+-------+----------| | i Receive channel in high impedence | J3 | Open | | mode | | | |-----------------------------------------+-------+----------| | Receive termination set to 100Ohm | J3 | Closed | |------------------------------------------------------------| | Note: Jumpers located inside external line interface | +------------------------------------------------------------+ +---------------------------------------------------------+ | SUPPORTED COMMAND SET | |---------------------------------------------------------| | Basic AT Commands | |---------------------------------------------------------| | AT, A/ | |---------------------------------------------------------| | A, E, Q, V, W | |---------------------------------------------------------| | &C, &R, &Z | |---------------------------------------------------------| | S Registers | |---------------------------------------------------------| | S3, S4, S12, S25, S26 | |---------------------------------------------------------| | | |---------------------------------------------------------| | Note: See MHI Help File for full command documentation. | +---------------------------------------------------------+ PROPRIETARY AT COMMAND SET