DIALOGIC CORPORATION ==================== D/240SC-T1, D/300SC-E1, DTI/241SC, DTI/301SC (COAXIAL VERSIONS) Card Type Telephony, T1 or E1 CSU/DSU Chipset Unidentified I/O Options PEB/SCbus connector T1/E1 Transfer Rate 1.544Mbps/2.048Mbps T1/E1 Protocol Unidentified Frame Type Unidentified Data Bus 16-bit ISA Card Size Full height, full length +------------------------------------------------------------+ | CONNECTIONS | |------------------------------------------------------------| | Function | Label | Function | Label | |--------------------+-------+-----------------------+-------| | T1 or E1 interface | P1 | PEM bus/SCbus | P5 | | | | connector | | |--------------------+-------+-----------------------+-------| | T1 or E1 interface | P2 | | | +------------------------------------------------------------+ +------------------------------------------------------------+ | USER CONFIGURABLE SETTINGS | |------------------------------------------------------------| | Setting | Label | Position | |-----------------------------------------+-------+----------| | | Transmit coaxial connector shield | J100A | Closed | | | is grounded | | | |---+-------------------------------------+-------+----------| | | Transmit coaxial connector shield | J100A | Open | | | is not grounded | | | |---+-------------------------------------+-------+----------| | | Receive coaxial connector shield is | J100B | Closed | | | grounded | | | |---+-------------------------------------+-------+----------| | | Receive coaxial connector shield is | J100B | Open | | | not grounded | | | |---+-------------------------------------+-------+----------| |>> | Board is not in loopback test mode | SW101 | Off | |---+-------------------------------------+-------+----------| | | Board is in loopback test mode | SW101 | On | +------------------------------------------------------------+ +------------------------------------------------------------+ | PEB BUS TERMINATION | |------------------------------------------------------------| | Setting | XT | |-------------------------------+----------------------------| | Not terminated | Not installed | |-------------------------------+----------------------------| | Terminated as Network Module | Position A | |-------------------------------+----------------------------| | Terminated as Resource Module | Position B | +------------------------------------------------------------+ +------------------------------------------------------------+ | BOARD NUMBER SELECTION | |------------------------------------------------------------| | Setting | SW1 | |----------------------------+-------------------------------| | 1 | Position 0 | |----------------------------+-------------------------------| | 2 | Position 1 | |----------------------------+-------------------------------| | 3 | Position 2 | |----------------------------+-------------------------------| | 4 | Position 3 | |----------------------------+-------------------------------| | 5 | Position 4 | |----------------------------+-------------------------------| | 6 | Position 5 | |----------------------------+-------------------------------| | 7 | Position 6 | |----------------------------+-------------------------------| | 8 | Position 7 | |----------------------------+-------------------------------| | 9 | Position 8 | |----------------------------+-------------------------------| | 10 | Position 9 | |----------------------------+-------------------------------| | 11 | Position A | |----------------------------+-------------------------------| | 12 | Position B | |----------------------------+-------------------------------| | 13 | Position C | |----------------------------+-------------------------------| | 14 | Position D | |----------------------------+-------------------------------| | 15 | Position E | |----------------------------+-------------------------------| | 16 | Position F | +------------------------------------------------------------+ +------------------------------------------------------------+ | DIAGNOSTIC LED(S) | |------------------------------------------------------------| | LED | Color | Status | Condition | |-----+--------------+--------+------------------------------| | D1 | Red | On | Valid clock signal not being | | | | | received | |-----+--------------+--------+------------------------------| | D1 | Red | Off | Valid clock signal being | | | | | received | |-----+--------------+--------+------------------------------| | D2 | Yellow | On | Signal has lost frame | | | | | synchronization | |-----+--------------+--------+------------------------------| | D2 | Yellow | Off | Signal has not lost frame | | | | | synchronization | |-----+--------------+--------+------------------------------| | D3 | Green | On | Valid T1/E1 signal being | | | | | received | |-----+--------------+--------+------------------------------| | D3 | Green | Off | Valid T1/E1 signal not being | | | | | received | |-----+--------------+--------+------------------------------| | D4 | Unidentified | On | Board is in loopback test | | | | | mode | |-----+--------------+--------+------------------------------| | D4 | Unidentified | Off | Board is not in loopback | | | | | test mode | +------------------------------------------------------------+