CARDINAL TECHNOLOGIES, INC.
===========================

   9600BPS-V.32 V.42BIS FAX (INT)

   Card Type                    Fax, Modem (asynchronous)         
   Chip Set                     Unidentified                      
   Maximum Data Rate            9600bps                           
   Maximum Fax Rate             Unidentified                      
   Data Bus                     8-bit ISA                         
   Fax Class                    Unidentified                      
   Data Modulation Protocol     Bell 103/212A                     
                                                                  
                                ITU-T V.21, V.22, V.22bis, V.32   
   Fax Modulation Protocol      Unidentified                      
   Error Correction/Compression MNP5, V.42, V.42bis               

<gopher://bitreich.org/I/th99/t/C-D/52273-1.png>
   

   +------------------------------------------------------------+
   |                        CONNECTIONS                         |
   |------------------------------------------------------------|
   |        Function        | Label  |   Function   |   Label   |
   |------------------------------------------------------------|
   | Line out/in                 |   CN1   | Line in/out | CN2  |
   +------------------------------------------------------------+

   +------------------------------------------------------------+
   |                    SERIAL PORT ADDRESS                     |
   |------------------------------------------------------------|
   |      Setting       |       SW1/A       |       SW1/B       |
   |--------------------+-------------------+-------------------|
   |    COM1 (3F8h)     |        On         |        On         |
   |--------------------+-------------------+-------------------|
   |    COM2 (2F8h)     |        Off        |        On         |
   |--------------------+-------------------+-------------------|
   |    COM3 (3E8h)     |        On         |        Off        |
   |--------------------+-------------------+-------------------|
   |    COM4 (2E8h)     |        Off        |        Off        |
   +------------------------------------------------------------+

   +------------------------------------------------------------+
   |                    INTERRUPT SELECTION                     |
   |------------------------------------------------------------|
   | Setting  | SW1/C  | SW1/D  | P3/Pins 1 & 2 | P3/Pins 2 & 3 |
   |----------+--------+--------+---------------+---------------|
   |    2     |  N/A   |  N/A   |     Open      |    Closed     |
   |----------+--------+--------+---------------+---------------|
   |    3     |  Off   |   On   |      N/A      |      N/A      |
   |----------+--------+--------+---------------+---------------|
   |    4     |   On   |  Off   |      N/A      |      N/A      |
   |----------+--------+--------+---------------+---------------|
   |    5     |  N/A   |  N/A   |    Closed     |     Open      |
   +------------------------------------------------------------+

                     Proprietary AT Command Set

   +------------------------------------------------------------+
   |                    COMMUNICATIONS MODE                     |
   |------------------------------------------------------------|
   | Type:        | Configuration                               |
   |--------------+---------------------------------------------|
   | Format:      | AT [cmds] &Qn [cmds]                        |
   |--------------+---------------------------------------------|
   | Description: | Selects communications mode options         |
   |--------------+---------------------------------------------|
   |   Command    |                    Mode                     |
   |--------------+---------------------------------------------|
   |     &Q0      | Asynchronous mode, serial port speed        |
   |              | follows connect speed                       |
   |--------------+---------------------------------------------|
   |     &Q1      | Not used                                    |
   |--------------+---------------------------------------------|
   |     &Q2      | Not used                                    |
   |--------------+---------------------------------------------|
   |     &Q3      | Not used                                    |
   |--------------+---------------------------------------------|
   |     &Q4      | Reports 'OK'                                |
   |--------------+---------------------------------------------|
   |    i &Q5     | Error correction mode                       |
   |--------------+---------------------------------------------|
   |     &Q6      | Asynchronous mode, buffered asynchronous    |
   |              | mode                                        |
   +------------------------------------------------------------+

           See document V2267 for a full command summary.