ACTIONTEC ELECTRONICS, INC.
===========================

   DATALINK 56K

   Card Type                    Modem, Fax                        
   Chip Set                     Unidentified                      
   Maximum Modem Rate           56Kbps                            
   Maximum Fax Rate             14.4Kbps                          
   Data Modulation Protocol     Unidentified                      
   Fax Modulation Protocol      Unidentified                      
   Error Correction/Compression MNP5, V.42bis                     
   Fax Class                    Unidentifed                       
   Data Bus                     PCMCIA                            

                                                            54676

   +---------------------------------------------------------+
   |                  SUPPORTED COMMAND SET                  |
   |---------------------------------------------------------|
   |                    Basic AT Commands                    |
   |---------------------------------------------------------|
   | AT, A/                                                  |
   |---------------------------------------------------------|
   | A, E, H, V, Z                                           |
   |---------------------------------------------------------|
   | &F, &W                                                  |
   |---------------------------------------------------------|
   |                                                         |
   |---------------------------------------------------------|
   | Note: See MHI Help File for full command documentation. |
   +---------------------------------------------------------+

                     PROPRIETARY AT COMMAND SET

   +------------------------------------------------------------+
   |                            DIAL                            |
   |------------------------------------------------------------|
   | Type:        | Immediate                                   |
   |--------------+---------------------------------------------|
   | Format:      | AT [cmds] D<#> [cmds]                       |
   |--------------+---------------------------------------------|
   | Description: | Dials telephone number according to any     |
   |              | modifiers included in the string            |
   |--------------+---------------------------------------------|
   | Note:        | Any combination of modifiers can be used to |
   |              | produce the desired dial functions in       |
   |              | sequence.                                   |
   |--------------+---------------------------------------------|
   |   Command    |                  Function                   |
   |--------------+---------------------------------------------|
   |      DP      | Pulse dialing enabled                       |
   |--------------+---------------------------------------------|
   |      DT      | Tone dialing enabled/Pulse dialing disabled |
   |--------------+---------------------------------------------|
   |      D,      | Dialing paused for amount of time specified |
   |              | in S8 register                              |
   +------------------------------------------------------------+

   +------------------------------------------------------------+
   |                       SPEAKER VOLUME                       |
   |------------------------------------------------------------|
   | Type:        | Configuration                               |
   |--------------+---------------------------------------------|
   | Format:      | AT [cmds] Ln [cmds]                         |
   |--------------+---------------------------------------------|
   | Description: | Controls speaker volume                     |
   |--------------+---------------------------------------------|
   |   Command    |                  Function                   |
   |--------------+---------------------------------------------|
   |      L0      | Speaker disabled                            |
   |--------------+---------------------------------------------|
   |      L2      | Volume on                                   |
   +------------------------------------------------------------+

   +------------------------------------------------------------+
   |                        SPEAKER MODE                        |
   |------------------------------------------------------------|
   | Type:        | Configuration                               |
   |--------------+---------------------------------------------|
   | Format:      | AT [cmds] Mn [cmds]                         |
   |--------------+---------------------------------------------|
   | Description: | Selects various speaker options             |
   |--------------+---------------------------------------------|
   |   Command    |                  Function                   |
   |--------------+---------------------------------------------|
   |      M0      | Speaker disabled                            |
   |--------------+---------------------------------------------|
   |      M1      | Speaker enabled until carrier signal        |
   |              | detected                                    |
   |--------------+---------------------------------------------|
   |      M2      | Speaker enabled                             |
   +------------------------------------------------------------+

   +------------------------------------------------------------+
   |                   EXTENDED RESULT CODES                    |
   |------------------------------------------------------------|
   | Type:        | Configuration                               |
   |--------------+---------------------------------------------|
   | Format:      | AT [cmds] Wn [cmds]                         |
   |--------------+---------------------------------------------|
   | Description: | Reports modem progress                      |
   |--------------+---------------------------------------------|
   |   Command    |                  Function                   |
   |--------------+---------------------------------------------|
   |      W0      | Enables CONNECT result codes to report      |
   |              | modem type and DTE speed.                   |
   |--------------+---------------------------------------------|
   |      W1      | Enables CONNECT result codes to report DTE  |
   |              | speed, carrier, protocol, and compression   |
   |--------------+---------------------------------------------|
   |      W2      | Enables CONNECT result codes to report DCE  |
   |              | speed..                                     |
   +------------------------------------------------------------+

   +------------------------------------------------------------+
   |                 DATA CARRIER DETECT (DCD)                  |
   |------------------------------------------------------------|
   | Type:        | Configuration                               |
   |--------------+---------------------------------------------|
   | Format:      | AT [cmds] &Cn [cmds]                        |
   |--------------+---------------------------------------------|
   | Description: | Selects whether the DCD option is enabled   |
   |              | or disabled                                 |
   |--------------+---------------------------------------------|
   |   Command    |                  Function                   |
   |--------------+---------------------------------------------|
   |     &C1      | DCD enabled after carrier signal detected   |
   +------------------------------------------------------------+

   +------------------------------------------------------------+
   |                 DATA TERMINAL READY (DTR)                  |
   |------------------------------------------------------------|
   | Type:        | Configuration                               |
   |--------------+---------------------------------------------|
   | Format:      | AT [cmds] &Dn [cmds]                        |
   |--------------+---------------------------------------------|
   | Description: | Selects modem response to DTR               |
   |--------------+---------------------------------------------|
   |   Command    |                  Function                   |
   |--------------+---------------------------------------------|
   |     &D2      | DTR enabled                                 |