ACTIONTEC ELECTRONICS, INC.
===========================

   DATALINK 33.6

   Card Type              Fax, Modem (asynchronous)               
   Chip Set               Unidentified                            
   Maximum Data Rate      33.6Kbps                                
   Maximum Fax Rate       14.4Kbps                                
   Data Bus               PCMCIA Type II                          
   Fax Class              Class I & II                            
   Data Modulation        Bell 103/212A                           
   Protocol                                                       
                          ITU-T V.21, V.22, V.22bis, V.23, V.32,  
                          V.32bis, V.34                           
   Fax Modulation         ITU-T V.17, V.21CH2, V.27ter, V.29      
   Protocol               
   Error                  MNP5, V.42, V.42bis                     
   Correction/Compression 

                                                            53793

   +------------------------------------------------------------+
   |                   SUPPORTED COMMAND SET                    |
   |------------------------------------------------------------|
   |                     Basic AT Commands                      |
   |------------------------------------------------------------|
   | AT, A/                                                     |
   |------------------------------------------------------------|
   | A, E, H, V, W, Z                                           |
   |------------------------------------------------------------|
   | &D, &F, &W                                                 |
   |------------------------------------------------------------|
   |                        S Registers                         |
   |------------------------------------------------------------|
   | S0, S6, S7, S8                                             |
   |------------------------------------------------------------|
   | Note: Please see MHI Help file for full command            |
   | documentation.                                             |
   +------------------------------------------------------------+

                     Proprietary AT Command Set

   +------------------------------------------------------------+
   |                            DIAL                            |
   |------------------------------------------------------------|
   | Type:        | Immediate                                   |
   |--------------+---------------------------------------------|
   | Format:      | AT [cmds] D<#> [cmds]                       |
   |--------------+---------------------------------------------|
   | Description: | Dials telephone number according to any     |
   |              | modifiers included in the string            |
   |--------------+---------------------------------------------|
   | Note:        | Any combination of modifiers can be used to |
   |              | produce the desired dial functions in       |
   |              | sequence.                                   |
   |--------------+---------------------------------------------|
   |   Modifier   |                  Function                   |
   |--------------+---------------------------------------------|
   |      T       | Tone dialing enabled                        |
   |--------------+---------------------------------------------|
   |      P       | Pulse dialing enabled                       |
   |--------------+---------------------------------------------|
   |      ,       | Dialing paused for amount of time specified |
   |              | in S8 register                              |
   |--------------+---------------------------------------------|
   |      W       | Dialing resumed following dial tone         |
   |              | detection                                   |
   +------------------------------------------------------------+

   +------------------------------------------------------------+
   |                       SPEAKER VOLUME                       |
   |------------------------------------------------------------|
   | Type:        | Configuration                               |
   |--------------+---------------------------------------------|
   | Format:      | AT [cmds] Ln [cmds]                         |
   |--------------+---------------------------------------------|
   | Description: | Controls speaker volume                     |
   |--------------+---------------------------------------------|
   |   Command    |                  Function                   |
   |--------------+---------------------------------------------|
   |      L0      | Speaker volume disabled                     |
   |--------------+---------------------------------------------|
   |     i L2     | Speaker volume enabled                      |
   +------------------------------------------------------------+

   +------------------------------------------------------------+
   |                        SPEAKER MODE                        |
   |------------------------------------------------------------|
   | Type:        | Configuration                               |
   |--------------+---------------------------------------------|
   | Format:      | AT [cmds] Mn [cmds]                         |
   |--------------+---------------------------------------------|
   | Description: | Selects various speaker options             |
   |--------------+---------------------------------------------|
   |   Command    |                  Function                   |
   |--------------+---------------------------------------------|
   |      M0      | Speaker disabled                            |
   |--------------+---------------------------------------------|
   |     i M1     | Speaker enabled until carrier signal        |
   |              | detected, off for transmission              |
   |--------------+---------------------------------------------|
   |      M2      | Speaker enabled                             |
   +------------------------------------------------------------+

   +------------------------------------------------------------+
   |                 DATA CARRIER DETECT (DCD)                  |
   |------------------------------------------------------------|
   | Type:        | Configuration                               |
   |--------------+---------------------------------------------|
   | Format:      | AT [cmds] &Cn [cmds]                        |
   |--------------+---------------------------------------------|
   | Description: | Selects whether the DCD option is enabled   |
   |              | or disabled                                 |
   |--------------+---------------------------------------------|
   |   Command    |                  Function                   |
   |--------------+---------------------------------------------|
   |     &C1      | DCD enabled after carrier signal detected   |
   +------------------------------------------------------------+

   +------------------------------------------------------------+
   |               MISCELLANEOUS TECHNICAL NOTES                |
   |------------------------------------------------------------|
   | The PCMCIA fax/modem requires an analog RJ-11 telephone    |
   | line. A PBX or digital phone line may damage the PCMCIA    |
   | fax/modem or telephone equipment.                          |