AMQUEST CORPORATION =================== AM2814I-V34, AM2814I-HY Card Type Modem (synchronous/asynchronous) Chipset Rockwell Maximum Data Rate 28.8Kbps Maximum Fax Rate 14.4Kbps Data Modulation Bell 103A, 212A ITU-T V.22bis, V.32, V.32bis, V.34 Rockwell V.FC Fax Modulation ITU-T V.17, V.21CH2, V.27ter, V.29 Error MNP5, MNP10, V.42, V.42bis Correction/Compression Fax Class Class I & II Data Bus 8-bit ISA Card Size Full height, one-third length +------------------------------------------------------------+ | CONNECTIONS | |------------------------------------------------------------| | Function | Label | Function | Label | |----------------------+-------+---------------------+-------| | Telephone line | CN1 | Telephone line | CN2 | +------------------------------------------------------------+ +------------------------------------------------------------+ | USER CONFIGURABLE SETTINGS | |------------------------------------------------------------| | Setting | Label | Position | |----------------------------------------+-------+-----------| | i Factory configured - do not alter | SW1/7 | Off | |----------------------------------------+-------+-----------| | i Factory configured - do not alter | SW1/8 | Off | |------------------------------------------------------------| | Note: SW1/8 may not be present on all models. | +------------------------------------------------------------+ +------------------------------------------------------------+ | SERIAL PORT ADDRESS SELECTION | |------------------------------------------------------------| | Setting | SW1/5 | SW1/6 | |--------------------+-------------------+-------------------| | 3F8h (COM1:) | On | On | |--------------------+-------------------+-------------------| | 2F8h (COM2:) | Off | On | |--------------------+-------------------+-------------------| | 3E8h (COM3:) | On | Off | |--------------------+-------------------+-------------------| | i 2E8h (COM4:) | Off | Off | +------------------------------------------------------------+ +------------------------------------------------------------+ | INTERRUPT SELECTION | |------------------------------------------------------------| | Setting | SW1/1 | SW1/2 | SW1/3 | SW1/4 | |------------+-----------+-----------+-----------+-----------| | i 3 | Off | Off | Off | On | |------------+-----------+-----------+-----------+-----------| | 4 | Off | Off | On | Off | |------------+-----------+-----------+-----------+-----------| | 5 | Off | On | Off | Off | |------------+-----------+-----------+-----------+-----------| | 7 | On | Off | Off | Off | +------------------------------------------------------------+ +------------------------------------------------------------+ | SUPPORTED STANDARD COMMANDS | |------------------------------------------------------------| | Basic AT Commands | |------------------------------------------------------------| | +++, 'comma', A/ | |------------------------------------------------------------| | A, B, E, H, L, M, N, O, P, Q, T, V, W, X, Y, Z | |------------------------------------------------------------| | &C, &D, &F, &G, &K, &M, &P, &Q, &R, &S, &T, &V, &W, &X, | | &Y, &Z | |------------------------------------------------------------| | Extended AT Commands | |------------------------------------------------------------| | \A, \B, \G, \L, \W | |------------------------------------------------------------| | %C, %E, %F, %L, %Q | |------------------------------------------------------------| | Special AT Commands | |------------------------------------------------------------| | #CID, :E, *H, -K, )M, @M, -Q | |------------------------------------------------------------| | S-Registers | |------------------------------------------------------------| | The S-registers are unidentified. | |------------------------------------------------------------| | Note: See MHI help file for complete information. | +------------------------------------------------------------+ Proprietary AT Command Set +------------------------------------------------------------+ | BREAK TYPE | |------------------------------------------------------------| | Type: | Configuration | |--------------+---------------------------------------------| | Format: | AT [cmds] \Kn [cmds] | |--------------+---------------------------------------------| | Description: | Configures action of break signal. | |--------------+---------------------------------------------| | Command | Function | |--------------+---------------------------------------------| | \K0 | Enter command mode, do not send break to | | | remote modem. | |--------------+---------------------------------------------| | \K1 | Buffers cleared and break sent to remote | | | modem. | |--------------+---------------------------------------------| | \K2 | Enter command mode, do not send break to | | | remote modem. | |--------------+---------------------------------------------| | \K3 | Send break to remote modem immediately. | |--------------+---------------------------------------------| | \K4 | Enter command mode, do not send break to | | | remote modem. | |--------------+---------------------------------------------| | \K5 | Send break with transmitted data. | +------------------------------------------------------------+ +------------------------------------------------------------+ | DIAL | |------------------------------------------------------------| | Type: | Immediate | |--------------+---------------------------------------------| | Format: | AT [cmds] D<#>;[cmds] | |--------------+---------------------------------------------| | Description: | Dials the telephone number indicated | | | according to any modifiers included in the | | | string. | |--------------+---------------------------------------------| | Command | Function | |--------------+---------------------------------------------| | DJ | MNP10 link will be negotiated at 1200bps | | | for this call. | |--------------+---------------------------------------------| | DK | MNP10 power level adjustment enabled for | | | this call. | |--------------+---------------------------------------------| | DL | Re-dial last number. | |--------------+---------------------------------------------| | DP | Pulse dialing enabled. | |--------------+---------------------------------------------| | DR | Answer mode enabled; originate mode | | | disabled following handshake initiation. | |--------------+---------------------------------------------| | DS=n | Dial stored telephone number n. | |--------------+---------------------------------------------| | DT | Tone dialing enabled. | |--------------+---------------------------------------------| | DW | Dialing resumed following dial tone | | | detection. | |--------------+---------------------------------------------| | D, | Dialing paused for amount of time specified | | | in S8 register. | |--------------+---------------------------------------------| | D! | Flash function initiated. Modem commanded | | | to go off-hook for specified time before | | | returning on-hook. | |--------------+---------------------------------------------| | D@ | Wait for Quiet Answer function enabled. | | | Modem waits until a "quiet answer," a | | | ring-back signal followed by silence up to | | | the time specified in S7, is received prior | | | to executing the rest of the dial string. | |--------------+---------------------------------------------| | D^ | Calling tone disabled for this call. | |--------------+---------------------------------------------| | D& | Wait for prompt tone detection function | | | enabled. Waits for prompt tone for amount | | | of time specified by the S7 command. | |--------------+---------------------------------------------| | D; | Modem returned to idle state after dialing. | | | The semicolon can only be placed at the end | | | of the dial command. | +------------------------------------------------------------+ +------------------------------------------------------------+ | DISPLAY INFORMATION | |------------------------------------------------------------| | Type: | Immediate | |--------------+---------------------------------------------| | Format: | AT [cmds] In [cmds] | |--------------+---------------------------------------------| | Description: | Displays information requested about the | | | modem. | |--------------+---------------------------------------------| | Command | Function | |--------------+---------------------------------------------| | I0 | Displays product identification code. | |--------------+---------------------------------------------| | I1 | Displays ROM checksum. | |--------------+---------------------------------------------| | I2 | Tests and displays ROM checksum result. | |--------------+---------------------------------------------| | I3 | Displays firmware revision. | |--------------+---------------------------------------------| | I6 | Displays modem pump model. | +------------------------------------------------------------+ +------------------------------------------------------------+ | PROTOCOL/SPEED | |------------------------------------------------------------| | Type: | Configuration | |--------------+---------------------------------------------| | Format: | AT [cmds] Fn [cmds] | |--------------+---------------------------------------------| | Description: | Selects the protocol and speed the modem | | | will attempt to connect at. | |--------------+---------------------------------------------| | Command | Function | |--------------+---------------------------------------------| | F0 | Auto-detect the highest common connect | | | speed. | |--------------+---------------------------------------------| | F1 | Select V.21 or Bell 103 at 300bps speed. | |--------------+---------------------------------------------| | F3 | Select V.23 at 75/1200bps speed. | |--------------+---------------------------------------------| | F4 | Select V.22 or Bell 212A at 1200bps speed. | |--------------+---------------------------------------------| | F5 | Select V.22bis at 2400bps speed. | |--------------+---------------------------------------------| | F6 | Select V.32 or V.32bis at 4800bps speed. | |--------------+---------------------------------------------| | F7 | Select V.32bis at 7200bps speed. | |--------------+---------------------------------------------| | F8 | Select V.32bis or V.32 at 9600bps speed. | |--------------+---------------------------------------------| | F9 | Select V.32bis at 12Kbps speed. | |--------------+---------------------------------------------| | F10 | Select V.32bis at 14.4Kbps speed. | +------------------------------------------------------------+