BANKSIA TECHNOLOGY PTY, LTD. ============================ PRO 34 Card Type Fax, Modem (synchronous/asynchronous) Chip Set Unidentified Maximum Data Rate 28.8Kbps Maximum Fax Rate 14.4Kbps Data Bus External Fax Class Class I & II Data Modulation Bell 103/212A Protocol ITU-T V.21, V.22, V.22bis, V.23, V.32, V.32bis, V.34 Fax Modulation ITU-T V.17, V.27ter, V.29 Protocol Error MNP5, MNP10, V.42, V.42bis Correction/Compression +------------------------------------------------------------+ | CONNECTIONS | |------------------------------------------------------------| | Function | Label | Function | Label | |------------------------------------------------------------| | Auxiliary port | CN1 | DC power | CN4 | |----------------------------+---------+--------------+------| | Line out | CN2 | Power switch | SW1 | |----------------------------+---------+--------------+------| | RS-232/422 | CN3 | | | +------------------------------------------------------------+ +------------------------------------------------------------+ | USER CONFIGURABLE SETTINGS | |------------------------------------------------------------| | Setting | Label | Position | |-------------------------------------+-------+--------------| | i DTR signal ignored | SW1/1 | On | |-------------------------------------+-------+--------------| | DTR signal normal | SW1/1 | Off | |-------------------------------------+-------+--------------| | i DCD and DSR forced high | SW1/2 | On | |-------------------------------------+-------+--------------| | DCD and DSR normal | SW1/2 | Off | |-------------------------------------+-------+--------------| | i Echo disabled | SW1/3 | On | |-------------------------------------+-------+--------------| | Echo enabled | SW1/3 | Off | |-------------------------------------+-------+--------------| | i Result codes disabled | SW1/4 | On | |-------------------------------------+-------+--------------| | Result codes enabled | SW1/4 | Off | |-------------------------------------+-------+--------------| | i Leased-line operation | SW1/5 | On | |-------------------------------------+-------+--------------| | Switched line operation | SW1/5 | Off | |-------------------------------------+-------+--------------| | i Auto-answer enabled on 2nd ring | SW1/6 | On | |-------------------------------------+-------+--------------| | Auto-answer disabled on 2nd ring | SW1/6 | Off | |-------------------------------------+-------+--------------| | i Synchronous mode 2 enabled | SW1/7 | On | |-------------------------------------+-------+--------------| | Synchronous mode 2 disabled | SW1/7 | Off | |-------------------------------------+-------+--------------| | i Dumb mode | SW1/8 | On | |-------------------------------------+-------+--------------| | Smart mode | SW1/8 | Off | |-------------------------------------+-------+--------------| | i Flow control to XON/XOFF enabled | SW2/1 | On | |-------------------------------------+-------+--------------| | Flow control to XON/XOFF disabled | SW2/1 | Off | |-------------------------------------+-------+--------------| | i V.25bis command set synchronous | SW2/2 | On | | HDLC (NRZI) enabled | | | |-------------------------------------+-------+--------------| | V.25bis command set synchronous | SW2/2 | Off | | HDLC (NRZI) disabled | | | |-------------------------------------+-------+--------------| | i Factory configured - DO NOT ALTER | SW2/5 | Unidentified | |-------------------------------------+-------+--------------| | i Factory configured - DO NOT ALTER | SW2/6 | Unidentified | |-------------------------------------+-------+--------------| | i Factory configured - DO NOT ALTER | SW2/7 | Unidentified | |-------------------------------------+-------+--------------| | i Factory defaults loaded up on | SW2/8 | On | | power-up | | | |-------------------------------------+-------+--------------| | Do not force factory defaults on | SW2/8 | Off | | power-up | | | +------------------------------------------------------------+ +------------------------------------------------------------+ | AUXILIARY PORT | |------------------------------------------------------------| | Setting | LK1 | LK2 | LK3 | LK4 | |-------------+-----------------+------------+------+--------| | i PSTN | Pins 2 & 3 | Pins 1 & 2 | Open | Closed | | | closed | closed | | | |-------------+-----------------+------------+------+--------| | Leased-line | Pins 1 & 2 | Pins 2 & 3 | Open | Open | | | closed | closed | | | +------------------------------------------------------------+ +------------------------------------------------------------+ | AUXILIARY PORT - CONTINUED | |------------------------------------------------------------| | Setting | LK5 | LK6 | LK7 | LK8 | LK9 | |-------------+---------+---------+--------+--------+--------| | i PSTN | Closed | Closed | Open | Closed | Open | |-------------+---------+---------+--------+--------+--------| | Leased-line | Closed | Open | Closed | Closed | Closed | +------------------------------------------------------------+ +------------------------------------------------------------+ | MODULATION SELECTION | |------------------------------------------------------------| | Setting | SW2/3 | SW2/4 | |------------------------+-----------------+-----------------| | factory/stored setting | Off | Off | |------------------------+-----------------+-----------------| | 28800 carrier | Off | On | |------------------------+-----------------+-----------------| | 14400 carrier | On | Off | |------------------------+-----------------+-----------------| | 2400 carrier | On | On | +------------------------------------------------------------+ +------------------------------------------------------------+ | SUPPORTED COMMAND SET | |------------------------------------------------------------| | Basic AT Commands | |------------------------------------------------------------| | AT, 'Comma' | |------------------------------------------------------------| | A, B, E, H, L, M, N, O, P, Q, S, T, V, W, X, Y, Z | |------------------------------------------------------------| | &C, &D, &G, &L, &R, &S, &V, &W, &X, &Y, &Z | |------------------------------------------------------------| | Extended AT Commands | |------------------------------------------------------------| | \B, \G, \J, \V, \Y, \Z | |------------------------------------------------------------| | Special Commands | |------------------------------------------------------------| | *H, )M | |------------------------------------------------------------| | S Registers | |------------------------------------------------------------| | S0, S1, S2, S3, S4, S5, S6, S7, S8, S9, S10, S11, S12, | | S14, S16, S18, S25, S26, S36, S37, S38 | |------------------------------------------------------------| | Note: See MHI Help file for full command documentation. | +------------------------------------------------------------+ Proprietary AT Command Set For a full command summary, see BANKSIA TECHNOLOGY PTY, LTD., PRO