BANKSIA TECHNOLOGY PTY., LTD.
=============================

   MAC CARD 288

   Card Type              Fax, Modem (asynchronous)               
   Chip Set               Unidentified                            
   Maximum Data Rate      28.8Kbps                                
   Maximum Fax Rate       14.4Kbps                                
   Data Bus               PCMCIA Type II                          
   Fax Class              Class I & II                            
   Data Modulation        Bell 103/212A                           
   Protocol                                                       
                          ITU-T V.21, V.22, V.22bis, V.23, V.32,  
                          V.32bis, V.34                           
                                                                  
                          Rockwell V.FC                           
   Fax Modulation         ITU-T V.17, V.27ter, V.29               
   Protocol               
   Error                  MNP5, MNP10, V.42, V.42bis              
   Correction/Compression 

                                                            52913

   +------------------------------------------------------------+
   |                   SUPPORTED COMMAND SET                    |
   |------------------------------------------------------------|
   |                     Basic AT Commands                      |
   |------------------------------------------------------------|
   | AT, '+++', 'Comma', A/                                     |
   |------------------------------------------------------------|
   | A, B, C, E, H, L, M, N, O, P, Q, S, T, V, W, X, Y, Z       |
   |------------------------------------------------------------|
   | &C, &D, &F, &G, &J, &l, &K, &P, &Q, &S, &T, &V, &W, &Y, &Z |
   |------------------------------------------------------------|
   |                    Extended AT Commands                    |
   |------------------------------------------------------------|
   | \A, \B, \G, \K, \L, \V, %C, %E, %L, %Q                     |
   |------------------------------------------------------------|
   |                        S Registers                         |
   |------------------------------------------------------------|
   | S0, S1, S2, S3, S4, S5, S7, S8, S9, S10, S11, S12, S16,    |
   | S18, S24, S25, S29, S30                                    |
   |------------------------------------------------------------|
   | S32, S33, S36, S38, S39, S46, S48, S82, S86, S95           |
   |------------------------------------------------------------|
   |                      Special Commands                      |
   |------------------------------------------------------------|
   | *H, -K, -Q, )M, @M, :E, +MS                                |
   |------------------------------------------------------------|
   | Note: See MHI Help file for full command documentation.    |
   +------------------------------------------------------------+

                     Proprietary AT Command Set

   +------------------------------------------------------------+
   |                 AUTOSYNC ADDRESS CHARACTER                 |
   |------------------------------------------------------------|
   | Type:        | Register                                    |
   |--------------+---------------------------------------------|
   | Format:      | AT [cmds] S20=n [cmds]                      |
   |--------------+---------------------------------------------|
   | Default:     | 0                                           |
   |--------------+---------------------------------------------|
   | Range:       | 0-255                                       |
   |--------------+---------------------------------------------|
   | Unit:        | 1 byte                                      |
   |--------------+---------------------------------------------|
   | Description: | Defines the BSC sync character or the HDLC  |
   |              | address                                     |
   +------------------------------------------------------------+

   +------------------------------------------------------------+
   |                    BIT MAPPED REGISTERS                    |
   |------------------------------------------------------------|
   |           Register           |           Default           |
   |------------------------------+-----------------------------|
   |             S14              |             138             |
   |------------------------------+-----------------------------|
   |             S21              |              4              |
   |------------------------------+-----------------------------|
   |             S22              |             117             |
   |------------------------------+-----------------------------|
   |             S23              |             55              |
   |------------------------------+-----------------------------|
   |             S27              |             73              |
   |------------------------------+-----------------------------|
   |             S28              |              0              |
   |------------------------------+-----------------------------|
   |             S31              |              2              |
   |------------------------------+-----------------------------|
   |             S40              |             107             |
   |------------------------------+-----------------------------|
   |             S41              |              3              |
   +------------------------------------------------------------+

   +------------------------------------------------------------+
   |                  BIT-MAPPED REGISTER S19                   |
   |------------------------------------------------------------|
   | Format:        | AT [cmds] S19=n [cmds]                    |
   |----------------+-------------------------------------------|
   | Default:       | Unidentified                              |
   |----------------+-------------------------------------------|
   | Range:         | 0-30                                      |
   |----------------+-------------------------------------------|
   | Description:   | Controls Hayes AutoSync functions         |
   |------------------------------------------------------------|
   |   Bit   |   Value    |              Function               |
   |---------+------------+-------------------------------------|
   |    0    |          0 | Not used                            |
   |------------------------------------------------------------|
   |      1      |            0 | BSC enabled                   |
   |             |              |                               |
   |             |            1 | HDLC enabled                  |
   |-------------+--------------+-------------------------------|
   |      2      |            0 | AutoSync disabled             |
   |             |              |                               |
   |             |            1 | AutoSync enabled              |
   |-------------+--------------+-------------------------------|
   |      3      |            0 | NRZI enabled                  |
   |             |              |                               |
   |             |            1 | NZI enabled                   |
   |-------------+--------------+-------------------------------|
   |      4      |            0 | Mark idle enabled             |
   |             |              |                               |
   |             |            1 | Flag or syn idle              |
   +------------------------------------------------------------+

   +------------------------------------------------------------+
   |                        CONNECT MODE                        |
   |------------------------------------------------------------|
   | Type:        | Configuration                               |
   |--------------+---------------------------------------------|
   | Format:      | AT [cmds] \Nn [cmds]                        |
   |--------------+---------------------------------------------|
   | Description: | Controls the type of connection the modem   |
   |              | will operate in                             |
   |--------------+---------------------------------------------|
   |   Command    |                  Function                   |
   |--------------+---------------------------------------------|
   |     \N0      | Normal mode enabled                         |
   |--------------+---------------------------------------------|
   |     \N1      | Direct mode enabled                         |
   |--------------+---------------------------------------------|
   |     \N2      | Reliable mode enabled                       |
   |--------------+---------------------------------------------|
   |    i \N3     | Auto-reliable mode enabled                  |
   |--------------+---------------------------------------------|
   |     \N4      | V.42 reliable mode enabled                  |
   |--------------+---------------------------------------------|
   |     \N5      | MNP reliable mode enabled                   |
   +------------------------------------------------------------+

   +------------------------------------------------------------+
   |                            DIAL                            |
   |------------------------------------------------------------|
   | Type:        | Immediate                                   |
   |--------------+---------------------------------------------|
   | Format:      | AT [cmds] D<#> [cmds]                       |
   |--------------+---------------------------------------------|
   | Description: | Dials telephone number according to any     |
   |              | modifiers included in the string            |
   |--------------+---------------------------------------------|
   | Note:        | Any combination of modifiers can be used to |
   |              | produce the desired dial functions in       |
   |              | sequence.                                   |
   |--------------+---------------------------------------------|
   |   Modifier   |                  Function                   |
   |--------------+---------------------------------------------|
   |      J       | MNP10 link negotiation enabled              |
   |--------------+---------------------------------------------|
   |      K       | Power level adjustment enabled              |
   |--------------+---------------------------------------------|
   |      L       | Re-dial last number                         |
   |--------------+---------------------------------------------|
   |      P       | Pulse dialing enabled                       |
   |--------------+---------------------------------------------|
   |      T       | Tone dialing enabled                        |
   |--------------+---------------------------------------------|
   |      !       | Modem commanded to go off-hook for amount   |
   |              | of time specified in S29 register           |
   |--------------+---------------------------------------------|
   |      W       | Dialing resumed following dial tone         |
   |              | detection                                   |
   |--------------+---------------------------------------------|
   |      @       | Wait for quiet answer                       |
   |--------------+---------------------------------------------|
   |      ,       | Dialing paused for amount of time specified |
   |              | in S8 register                              |
   |--------------+---------------------------------------------|
   |      ;       | Modem returned to command state after       |
   |              | dialing                                     |
   +------------------------------------------------------------+

   +------------------------------------------------------------+
   |                       DIALING DELAY                        |
   |------------------------------------------------------------|
   | Type:        | Register                                    |
   |--------------+---------------------------------------------|
   | Format       | AT [cmds] S6=n [cmds]                       |
   |--------------+---------------------------------------------|
   | Default:     | 2                                           |
   |--------------+---------------------------------------------|
   | Range:       | 0-255                                       |
   |--------------+---------------------------------------------|
   | Unit:        | 1 second                                    |
   |--------------+---------------------------------------------|
   | Description: | Duration of delay after modem goes off-hook |
   |              | to wait for a dialtone                      |
   +------------------------------------------------------------+

   +------------------------------------------------------------+
   |                       DCE LINE SPEED                       |
   |------------------------------------------------------------|
   | Type:        | Register                                    |
   |--------------+---------------------------------------------|
   | Format       | AT [cmds] S37=n [cmds]                      |
   |--------------+---------------------------------------------|
   | Description: | Sets the maximum allowable data exchange    |
   |              | rate                                        |
   |--------------+---------------------------------------------|
   |   Command    |                  Function                   |
   |--------------+---------------------------------------------|
   |   i S37=0    | Automode connection                         |
   |--------------+---------------------------------------------|
   |    S37=1     | 300bps                                      |
   |--------------+---------------------------------------------|
   |    S37=2     | 300bps                                      |
   |--------------+---------------------------------------------|
   |    S37=3     | 300bps                                      |
   |--------------+---------------------------------------------|
   |    S37=5     | 1200bps                                     |
   |--------------+---------------------------------------------|
   |    S37=6     | 2400bps                                     |
   |--------------+---------------------------------------------|
   |    S37=7     | V.23 mode                                   |
   |--------------+---------------------------------------------|
   |    S37=8     | 4800bps                                     |
   |--------------+---------------------------------------------|
   |    S37=9     | 9600bps                                     |
   |--------------+---------------------------------------------|
   |    S37=10    | 12.0Kbps                                    |
   |--------------+---------------------------------------------|
   |    S37=11    | 14.4Kbps                                    |
   |--------------+---------------------------------------------|
   |    S37=12    | 7200bps                                     |
   +------------------------------------------------------------+

   +------------------------------------------------------------+
   |                     REPORT INFORMATION                     |
   |------------------------------------------------------------|
   | Type:        | Immediate                                   |
   |--------------+---------------------------------------------|
   | Format:      | AT [cmds] In [cmds]                         |
   |--------------+---------------------------------------------|
   | Description: | Displays information requested              |
   |--------------+---------------------------------------------|
   |   Command    |                  Function                   |
   |--------------+---------------------------------------------|
   |      I0      | Reports product code                        |
   |--------------+---------------------------------------------|
   |      I1      | Reports ROM checksum                        |
   |--------------+---------------------------------------------|
   |      I2      | Tests and reports ROM checksum              |
   |--------------+---------------------------------------------|
   |      I3      | Reports firmware revision, model and        |
   |              | interface type                              |
   +------------------------------------------------------------+

   +------------------------------------------------------------+
   |                      RTS TO CTS DELAY                      |
   |------------------------------------------------------------|
   | Type:        | Register                                    |
   |--------------+---------------------------------------------|
   | Format       | AT [cmds] S26=n [cmds]                      |
   |--------------+---------------------------------------------|
   | Default:     | 0                                           |
   |--------------+---------------------------------------------|
   | Range:       | 0 - 255                                     |
   |--------------+---------------------------------------------|
   | Unit:        | .01 second                                  |
   |--------------+---------------------------------------------|
   | Description: | Sets the duration of delay for CTS to       |
   |              | respond to RTS status change                |