BANKSIA TECHNOLOGY PTY., LTD.
=============================

   MY IN MODEM

   Card Type              Fax, Modem (asynchronous)               
   Chip Set               Unidentified                            
   Maximum Data Rate      14.4Kbps                                
   Maximum Fax Rate       14.4Kbps                                
   Data Bus               8-bit ISA                               
   Fax Class              Class I & II                            
   Data Modulation        Bell103/212A/2400                       
   Protocol                                                       
                          ITU-T V.21, V.22, V.22bis, V.23, V.32,  
                          V.32bis                                 
   Fax Modulation         ITU-T V.17, V.27ter, V.29               
   Protocol               
   Error                  MNP5, V.42, V.42bis                     
   Correction/Compression 

<gopher://bitreich.org/I/th99/t/A-B/52899-1.png>
   

   +------------------------------------------------------------+
   |                        CONNECTIONS                         |
   |------------------------------------------------------------|
   |           Function            |           Label            |
   |------------------------------------------------------------|
   | Line out                        |           CN1            |
   +------------------------------------------------------------+

   +------------------------------------------------------------+
   |                    SERIAL PORT ADDRESS                     |
   |------------------------------------------------------------|
   |      Setting       |       JP1/6       |       JP1/7       |
   |--------------------+-------------------+-------------------|
   |    COM1 (3F8h)     |      Closed       |      Closed       |
   |--------------------+-------------------+-------------------|
   |    COM2 (2F8h)     |      Closed       |       Open        |
   |--------------------+-------------------+-------------------|
   |    COM3 (3E8h)     |       Open        |      Closed       |
   |--------------------+-------------------+-------------------|
   |   i COM4 (2E8h)    |       Open        |       Open        |
   +------------------------------------------------------------+

   +------------------------------------------------------------+
   |                         INTERRUPT                          |
   |------------------------------------------------------------|
   | Setting  |  JP1/1  |  JP1/2  |  JP1/3  |  JP1/4  |  JP1/5  |
   |----------+---------+---------+---------+---------+---------|
   |    2     | Closed  |  Open   |  Open   |  Open   |  Open   |
   |----------+---------+---------+---------+---------+---------|
   |   i 3    |  Open   | Closed  |  Open   |  Open   |  Open   |
   |----------+---------+---------+---------+---------+---------|
   |    4     |  Open   |  Open   | Closed  |  Open   |  Open   |
   |----------+---------+---------+---------+---------+---------|
   |    5     |  Open   |  Open   |  Open   | Closed  |  Open   |
   |----------+---------+---------+---------+---------+---------|
   |    7     |  Open   |  Open   |  Open   |  Open   | Closed  |
   +------------------------------------------------------------+

   +------------------------------------------------------------+
   |                   SUPPORTED COMMAND SET                    |
   |------------------------------------------------------------|
   |                     Basic AT Commands                      |
   |------------------------------------------------------------|
   | AT, '+++', 'Comma', A/                                     |
   |------------------------------------------------------------|
   | A, B, D, E, H, I, L, M, N, O, P, Q, S, T, V, W, X, Y, Z    |
   |------------------------------------------------------------|
   | &C, &D, &F, &G, &K, &L, &P, &R, &S, &T, &V, &W, &Y, &Z     |
   |------------------------------------------------------------|
   |                    Extended AT Commands                    |
   |------------------------------------------------------------|
   | \A, \B, \G, \L, %C, %L, %Q                                 |
   |------------------------------------------------------------|
   |                        S Registers                         |
   |------------------------------------------------------------|
   | S0, S1, S2, S3, S4, S5, S6, S7, S8, S9, S10, S11, S12,     |
   | S16, S18, S21, S22, S24, S25, S26, S29                     |
   |------------------------------------------------------------|
   | S30 S32, S33, S36, S37, S38, S39, S46, S48, S82, S86, S95  |
   |------------------------------------------------------------|
   | Note: See MHI Help file for full command documentation.    |
   +------------------------------------------------------------+

                     Proprietary AT Command Set

   +------------------------------------------------------------+
   |                    MODULATION SELECTION                    |
   |------------------------------------------------------------|
   | Type:        | Configuration                               |
   |--------------+---------------------------------------------|
   | Format:      | AT [cmds] Fn [cmds]                         |
   |--------------+---------------------------------------------|
   | Description: | Controls line modulation unless automode is |
   |              | selected                                    |
   |------------------------------------------------------------|
   |    Command     |                 Function                  |
   |----------------+-------------------------------------------|
   |       F0       | Automode enabled                          |
   |----------------+-------------------------------------------|
   |       F1       | Force V.21 or Bell103 (according to ATB   |
   |                | command) at 300bps                        |
   |----------------+-------------------------------------------|
   |       F2       | 'OK' returned                             |
   |----------------+-------------------------------------------|
   |       F3       | Force V.23 75TX/1200RX originate or       |
   |                | 1200TX/75RX answer FSK                    |
   |----------------+-------------------------------------------|
   |       F4       | Force V.22 or Bell212A (according to ATB  |
   |                | command) at 1200bps                       |
   |----------------+-------------------------------------------|
   |       F5       | Force V.22bis or Bell2400 (according to   |
   |                | ATB command)                              |
   |----------------+-------------------------------------------|
   |       F6       | Force V.32 at 4800bps                     |
   |----------------+-------------------------------------------|
   |       F7       | Force V.32 at 7200bps                     |
   |----------------+-------------------------------------------|
   |       F8       | Force V.32 at 9600bps                     |
   |----------------+-------------------------------------------|
   |       F9       | Force V.32bis at 12000bps                 |
   |----------------+-------------------------------------------|
   |      F10       | Force V.32bis at 14400bps                 |
   +------------------------------------------------------------+

For proprietary command summary, see BANKSIA TECHNOLOGY PTY., LTD.,
                           MAC MODEM 288.