ANGIA COMMUNICATIONS, INC.
==========================

   PCMCIA 14400BPS DATA/14400BPS FAX

   Card Type              Fax, Modem (asynchronous)               
   Chip Set               Unidentified                            
   Maximum Data Rate      14.4Kbps                                
   Maximum Fax Rate       14.4Kbps                                
   Data Bus               PCMCIA Type II                          
   Fax Class              Class I                                 
   Data Modulation        Bell 103/212A                           
   Protocol                                                       
                          ITU-T V.21, V.22, V.22bis, V.23, V.32,  
                          V.32bis                                 
   Fax Modulation         ITU-T V.17, V.21CH2, V.27ter, V.29      
   Protocol               
   Error                  MNP5, V.42, V.42bis                     
   Correction/Compression 

                                                            V2329

   +------------------------------------------------------------+
   |                   SUPPORTED COMMAND SET                    |
   |------------------------------------------------------------|
   |                     Basic AT Commands                      |
   |------------------------------------------------------------|
   | AT, '+++', 'Comma', A/                                     |
   |------------------------------------------------------------|
   | A, B, C, D, E, F, H, L, M, O, P, Q, S, T, V, W, X, Y, Z    |
   |------------------------------------------------------------|
   | &C, &D, &E, &G, &J, &L, &M, &P, &Q, &R, &T, &V, &W, &Y, &Z |
   |------------------------------------------------------------|
   |                    Extended AT Commands                    |
   |------------------------------------------------------------|
   | \A, \B, \C, \G, \J, \K, \N \Q, \V, \X, \Z, %A, %E          |
   |------------------------------------------------------------|
   |                        S Registers                         |
   |------------------------------------------------------------|
   | S0, S1, S2, S3, S4, S5, S6, S7, S8, S9, S11, S12, S16,     |
   | S18, S25, S26, S36                                         |
   |------------------------------------------------------------|
   | S38, S39, S46, S48                                         |
   |------------------------------------------------------------|
   | Note: See MHI Help file for full command documentation.    |
   +------------------------------------------------------------+

                     Proprietary AT Command Set

   +------------------------------------------------------------+
   |                    BIT MAPPED REGISTERS                    |
   |------------------------------------------------------------|
   |          Register           |           Default            |
   |-----------------------------+------------------------------|
   |             S14             |          Read-only           |
   |-----------------------------+------------------------------|
   |             S19             |              26              |
   |-----------------------------+------------------------------|
   |             S20             |              32              |
   |-----------------------------+------------------------------|
   |             S21             |          Read-only           |
   |-----------------------------+------------------------------|
   |             S22             |          Read-only           |
   |-----------------------------+------------------------------|
   |             S23             |          Read-only           |
   |-----------------------------+------------------------------|
   |             S27             |          Read-only           |
   +------------------------------------------------------------+

   +------------------------------------------------------------+
   |                        COMPRESSION                         |
   |------------------------------------------------------------|
   | Type:        | Configuration                               |
   |--------------+---------------------------------------------|
   | Format:      | AT [cmds] %Cn [cmds]                        |
   |--------------+---------------------------------------------|
   | Description: | Selects data compression                    |
   |--------------+---------------------------------------------|
   |   Command    |                  Function                   |
   |--------------+---------------------------------------------|
   |     %C0      | Data compression disabled                   |
   |--------------+---------------------------------------------|
   |     %C1      | Data compression enabled; V.42bis during    |
   |              | LAPM, MNP5 during MNP                       |
   +------------------------------------------------------------+

   +------------------------------------------------------------+
   |                        CONNECT MODE                        |
   |------------------------------------------------------------|
   | Type:        | Configuration                               |
   |--------------+---------------------------------------------|
   | Format:      | AT [cmds] \Nn [cmds]                        |
   |--------------+---------------------------------------------|
   | Description: | Controls the type of connection the modem   |
   |              | will operate in                             |
   |--------------+---------------------------------------------|
   |   Command    |                  Function                   |
   |--------------+---------------------------------------------|
   |     \N0      | Direct mode enabled                         |
   |--------------+---------------------------------------------|
   |     \N1      | Normal mode enabled                         |
   |--------------+---------------------------------------------|
   |     \N2      | MNP reliable mode enabled                   |
   |--------------+---------------------------------------------|
   |     \N3      | MNP auto-reliable mode enabled              |
   |--------------+---------------------------------------------|
   |     \N4      | V.42 reliable mode enabled                  |
   |--------------+---------------------------------------------|
   |     \N5      | V.42 auto-reliable mode enabled             |
   |--------------+---------------------------------------------|
   |     \N6      | Reliable mode enabled                       |
   |--------------+---------------------------------------------|
   |    i \N7     | Auto-reliable mode enabled                  |
   +------------------------------------------------------------+

   +------------------------------------------------------------+
   |                  DISPLAY FIRMWARE VERSION                  |
   |------------------------------------------------------------|
   | Type:        | Immediate                                   |
   |--------------+---------------------------------------------|
   | Format:      | AT [cmds] %V [cmds]                         |
   |--------------+---------------------------------------------|
   | Description: | Displays firmware version information       |
   +------------------------------------------------------------+

   +------------------------------------------------------------+
   |                          ENQ/ACK                           |
   |------------------------------------------------------------|
   | Type:        | Configuration                               |
   |--------------+---------------------------------------------|
   | Format:      | AT [cmds] \Hn [cmds]                        |
   |--------------+---------------------------------------------|
   | Description: | Controls Hewlett Packard ENQ/ACK protocol   |
   |------------------------------------------------------------|
   |    Command     |                 Function                  |
   |----------------+-------------------------------------------|
   |     i \H0      | Hewlett Packard ENQ/ACK disabled          |
   |----------------+-------------------------------------------|
   |      \H1       | Hewlett Packard ENQ/ACK emulating         |
   |                | terminal enabled                          |
   |----------------+-------------------------------------------|
   |      \H2       | Hewlett Packard ENQ/ACK emulating host    |
   +------------------------------------------------------------+

   +------------------------------------------------------------+
   |                  FACTORY DEFAULT PROFILE                   |
   |------------------------------------------------------------|
   | Type:        | Configuration                               |
   |--------------+---------------------------------------------|
   | Format:      | AT [cmds] &F [cmds]                         |
   |--------------+---------------------------------------------|
   | Description: | Sets values in active profile to values     |
   |              | found in the default profile                |
   |------------------------------------------------------------|
   |    Command    |                  Function                  |
   |---------------+--------------------------------------------|
   |      &F0      | Restore auto-reliable                      |
   |               | compression/correction default profile     |
   |---------------+--------------------------------------------|
   |      &F1      | Restore auto-reliable                      |
   |               | compression/correction default profile     |
   +------------------------------------------------------------+

   +------------------------------------------------------------+
   |                      INACTIVITY TIMER                      |
   |------------------------------------------------------------|
   | Type:        | Configuration                               |
   |--------------+---------------------------------------------|
   | Format:      | AT [cmds] \Tn [cmds]                        |
   |--------------+---------------------------------------------|
   | Default:     | 0                                           |
   |--------------+---------------------------------------------|
   | Range:       | 0-90                                        |
   |--------------+---------------------------------------------|
   | Unit:        | 1 minute                                    |
   |--------------+---------------------------------------------|
   | Description: | Sets the length of time that the modem does |
   |              | not receive information before it           |
   |              | disconnects.                                |
   +------------------------------------------------------------+

   +------------------------------------------------------------+
   |                  MINIMUM MODEM PORT RATE                   |
   |------------------------------------------------------------|
   | Type:        | Configuration                               |
   |--------------+---------------------------------------------|
   | Format:      | AT [cmds] %Mn [cmds]                        |
   |--------------+---------------------------------------------|
   | Description: | Selects the minimum modem port rate         |
   |------------------------------------------------------------|
   |         Command         |             Function             |
   |-------------------------+----------------------------------|
   |         i %M300         | 300bps selected                  |
   |-------------------------+----------------------------------|
   |         %M1200          | 1200bps selected                 |
   |-------------------------+----------------------------------|
   |         %M2400          | 2400bps selected                 |
   |-------------------------+----------------------------------|
   |         %M4800          | 4800bps selected                 |
   |-------------------------+----------------------------------|
   |         %M7200          | 7200bps selected                 |
   |-------------------------+----------------------------------|
   |         %M9600          | 9600bps selected                 |
   |-------------------------+----------------------------------|
   |         %M12000         | 12000bps selected                |
   |-------------------------+----------------------------------|
   |         %M14400         | 14400bps selected                |
   +------------------------------------------------------------+

   +------------------------------------------------------------+
   |                      MODEM PORT RATE                       |
   |------------------------------------------------------------|
   | Type:        | Configuration                               |
   |--------------+---------------------------------------------|
   | Format:      | AT [cmds] %Bn [cmds]                        |
   |--------------+---------------------------------------------|
   | Description: | Selects the modem port rate                 |
   |------------------------------------------------------------|
   |       Command       |               Function               |
   |---------------------+--------------------------------------|
   |        %B300        | 300bps selected                      |
   |---------------------+--------------------------------------|
   |       %B1200        | 1200bps selected                     |
   |---------------------+--------------------------------------|
   |       %B2400        | 2400bps selected                     |
   |---------------------+--------------------------------------|
   |       %B4800        | 4800bps selected                     |
   |---------------------+--------------------------------------|
   |       %B7200        | 7200bps selected                     |
   |---------------------+--------------------------------------|
   |       %B9600        | 9600bps selected                     |
   |---------------------+--------------------------------------|
   |       %B12000       | 12000bps selected                    |
   |---------------------+--------------------------------------|
   |      i %B14400      | 14400bps selected                    |
   +------------------------------------------------------------+

   +------------------------------------------------------------+
   |                     REPORT INFORMATION                     |
   |------------------------------------------------------------|
   | Type:        | Immediate                                   |
   |--------------+---------------------------------------------|
   | Format:      | AT [cmds] In [cmds]                         |
   |--------------+---------------------------------------------|
   | Description: | Displays information requested              |
   |--------------+---------------------------------------------|
   |   Command    |                  Function                   |
   |--------------+---------------------------------------------|
   |      I0      | Reports product code                        |
   |--------------+---------------------------------------------|
   |      I1      | Reports ROM checksum                        |
   |--------------+---------------------------------------------|
   |      I2      | Reports 'OK'                                |
   |--------------+---------------------------------------------|
   |      I3      | Reports a date code                         |