BOCA RESEARCH, INC. =================== ON-LINE EXPRESS V.34 (FDSP34AI) Modem Type Data (asynchronous)/Fax/Voice Maximum Data Rate 28.8Kbps Maximum Fax Rate 14.4Kbps Data Bus 8 bit ISA Fax Class Class I Data Modulation AT&T V.32terbo Protocol Bell 103A/212A ITU-T V.21, V.22bis, V.23, V.32, V.32bis, V.34 Fax Modulation ITU-T V.17, V.21CH2, V.27ter, V.29 Protocol Error MNP5, V.42, V.42bis Correction/Compression +------------------------------------------------------------+ | CONNECTIONS | |------------------------------------------------------------| | Purpose | Location | Purpose | Location | |------------------+----------+-------------------+----------| | Line in | CN1 | Microphone | CN3 | |------------------+----------+-------------------+----------| | Line out | CN2 | Speaker | CN4 | +------------------------------------------------------------+ +------------------------------------------------------------+ | SERIAL PORT ADDRESS | |------------------------------------------------------------| | Setting | JP1/E | JP1/F | JP1/G | JP1/H | |---------------+-----------+----------+----------+----------| | COM1 (3F8h) | Closed | Open | Open | Open | |---------------+-----------+----------+----------+----------| |>> COM2 (2F8h) | Open | Closed | Open | Open | |---------------+-----------+----------+----------+----------| | COM3 (3E8h) | Open | Open | Closed | Open | |---------------+-----------+----------+----------+----------| | COM4 (2E8h) | Open | Open | Open | Closed | +------------------------------------------------------------+ +------------------------------------------------------------+ | INTERRUPT | |------------------------------------------------------------| | Setting | JP1/A | JP1/B | JP1/C | JP1/D | |---------+------------+------------+------------+-----------| |>> 3 | Closed | Open | Open | Open | |---------+------------+------------+------------+-----------| | 4 | Open | Closed | Open | Open | |---------+------------+------------+------------+-----------| | 5 | Open | Open | Closed | Open | |---------+------------+------------+------------+-----------| | 7 | Open | Open | Open | Closed | +------------------------------------------------------------+ Proprietary AT Command Set +------------------------------------------------------------+ | AUTO FALLBACK CHARACTER | |------------------------------------------------------------| | Type: | Register | |--------------+---------------------------------------------| | Format: | AT [cmds] S43=n [cmds] | |--------------+---------------------------------------------| | Default: | 13 | |--------------+---------------------------------------------| | Range: | 0 - 127 | |--------------+---------------------------------------------| | Unit: | ASCII | |--------------+---------------------------------------------| | Description: | Set auto fallback character during MNP | | | negotiation | +------------------------------------------------------------+ +------------------------------------------------------------+ | AUTO-RELIABLE FALLBACK CHARACTER | |------------------------------------------------------------| | Type: | Configuration | |--------------+---------------------------------------------| | Format: | AT [cmds] %An [cmds] | |--------------+---------------------------------------------| | Default: | Unidentified | |--------------+---------------------------------------------| | Range: | 0-127 | |--------------+---------------------------------------------| | Unit: | ASCII | |--------------+---------------------------------------------| | Description: | Sets the character used as the | | | auto-reliable fallback character | +------------------------------------------------------------+ +------------------------------------------------------------+ | AUTO SLEEP TIMER | |------------------------------------------------------------| | Format | AT [cmds] S46=n [cmds] | |--------------+---------------------------------------------| | Default: | 255 | |--------------+---------------------------------------------| | Range: | 0 - 255 | |--------------+---------------------------------------------| | Unit: | 100 ms | |--------------+---------------------------------------------| | Description: | Maximum duration of DTE and DCE inactivity | | | allowed prior to initiating low-power sleep | | | mode | +------------------------------------------------------------+ +------------------------------------------------------------+ | AUTO-RELIABLE TIME BUFFER CONFIGURATION | |------------------------------------------------------------| | Type: | Register | |--------------+---------------------------------------------| | Format: | AT [cmds] S48=n [cmds] | |--------------+---------------------------------------------| | Description: | Controls the handling of incoming data | | | during auto-reliable time period | |--------------+---------------------------------------------| | Command | Function | |--------------+---------------------------------------------| |>> S48=0 | Data is discarded | |--------------+---------------------------------------------| | S48=1 | Data is buffered | |--------------+---------------------------------------------| | S48=2 | Data is discarded, modem returns to normal | | | mode on receiving auto-reliable fallback | | | character | +------------------------------------------------------------+ +------------------------------------------------------------+ | BREAK SEND | |------------------------------------------------------------| | Type: | Immediate | |--------------+---------------------------------------------| | Format: | AT [cmds] \Bn [cmds] | |--------------+---------------------------------------------| | Range: | 0-9 | |--------------+---------------------------------------------| | Unit: | .1 second | |--------------+---------------------------------------------| | Description: | Sends break to modem | +------------------------------------------------------------+ +--------------------------------------------------------------+ | BREAK TYPE | |--------------------------------------------------------------| |Type: |Configuration | |------------------+-------------------------------------------| |Format: |AT [cmds] \Kn [cmds] | |------------------+-------------------------------------------| |Description: |Configures action of break signal | |--------------------------------------------------------------| | Command |Break from DTE | Break from | Modem |Break from | | | | DTE |receives \B| remote | | |Reliable/Normal| | | modem | | | mode |Direct mode | | | |---------+---------------+------------+-----------+-----------| | \K0 |Enter command |Send break |Buffers |Buffers | | |mode, do not |to remote |cleared and|cleared and| | |send break to |modem |break sent |break sent | | |remote modem |immediately,|to remote |to DTE | | | |then enter |modem | | | | |command mode| | | |---------+---------------+------------+-----------+-----------| | \K1 |Buffers cleared|Send break |Buffers |Buffers | | |and break sent |to remote |cleared and|cleared and| | |to remote modem|modem |break sent |break sent | | | |immediately |to remote |to DTE | | | | |modem | | |---------+---------------+------------+-----------+-----------| | \K2 |Enter command |Send break |Send break |Send break | | |mode, do not |to remote |to remote |to DTE | | |send break to |modem |modem |immediately| | |remote modem |immediately,|immediately| | | | |then enter | | | | | |command mode| | | |---------+---------------+------------+-----------+-----------| | \K3 |Send break to |Send break |Send break |Send break | | |remote modem |to remote |to remote |to DTE | | |immediately |modem |modem |immediately| | | |immediately |immediately| | |---------+---------------+------------+-----------+-----------| | \K4 |Enter command |Send break |Send break |Break sent | | |mode, do not |to remote |to remote |with | | |send break to |modem |modem with |received | | |remote modem |immediately,|transmitted|data to the| | | |then enter |data |DTE | | | |command mode| | | |---------+---------------+------------+-----------+-----------| | \K5 |Send break with|Send break |Send break |Break sent | | |transmitted |to remote |to remote |with | | |data |modem |modem with |received | | | |immediately |transmitted|data to the| | | | |data |DTE | +--------------------------------------------------------------+ +------------------------------------------------------------+ | COMPRESSION | |------------------------------------------------------------| | Format | AT [cmds] S59=n [cmds] | |--------------+---------------------------------------------| | Default: | 1 | |--------------+---------------------------------------------| | Range: | 0 - 1 | |--------------+---------------------------------------------| | Description: | Selects MNP5 status | |--------------+---------------------------------------------| | Command | Function | |--------------+---------------------------------------------| | S53=0 | Data compression disabled | |--------------+---------------------------------------------| | S53=1 | Data compression enabled | +------------------------------------------------------------+ +------------------------------------------------------------+ | COMPRESSION | |------------------------------------------------------------| | Type: | Configuration | |--------------+---------------------------------------------| | Format: | AT %Cn | |--------------+---------------------------------------------| | Description: | Selects data compression | |--------------+---------------------------------------------| | Command | Function | |--------------+---------------------------------------------| | %C0 | Data compression disabled | |--------------+---------------------------------------------| |>> %C1 | Data compression enabled | +------------------------------------------------------------+ +------------------------------------------------------------+ | CONNECT MODE | |------------------------------------------------------------| | Type: | Configuration | |--------------+---------------------------------------------| | Format: | AT [cmds] S53=n [cmds] | |--------------+---------------------------------------------| | Description: | Sets connect mode | |--------------+---------------------------------------------| | Command | Function | |--------------+---------------------------------------------| | S53=0 | Normal mode enabled | |--------------+---------------------------------------------| | S53=1 | Reliable mode enabled | |--------------+---------------------------------------------| | S53=2 | Auto-reliable mode enabled | |--------------+---------------------------------------------| |>> S53=3 | LAPM, MNP or normal mode enabled | |--------------+---------------------------------------------| | S53=4 | LAPM or MNP mode enabled | +------------------------------------------------------------+ +------------------------------------------------------------+ | DTE RATE STATUS | |------------------------------------------------------------| | Type: | Register | |--------------+---------------------------------------------| | Format: | AT [cmds] S62=n [cmds] | |--------------+---------------------------------------------| | Description: | Selects DTE rate | |--------------+---------------------------------------------| | Command | Function | |--------------+---------------------------------------------| | 0 | 300 bps | |--------------+---------------------------------------------| | 1 | 600 bps | |--------------+---------------------------------------------| | 2 | 1200 bps | |--------------+---------------------------------------------| | 3 | 2400 bps | |--------------+---------------------------------------------| | 4 | 4800 bps | |--------------+---------------------------------------------| | 5 | 7200 bps | |--------------+---------------------------------------------| | 6 | 9600 bps | |--------------+---------------------------------------------| | 7 | 12Kbps | |--------------+---------------------------------------------| | 8 | 14.4Kbps | |--------------+---------------------------------------------| | 9 | 16.8Kbps | |--------------+---------------------------------------------| | 10 | 19.2Kbps | |--------------+---------------------------------------------| | 11 | 21.6Kbps | |--------------+---------------------------------------------| | 12 | 24.0Kbps | |--------------+---------------------------------------------| | 13 | 26.4Kbps | |--------------+---------------------------------------------| | 14 | 28.8Kbps | |--------------+---------------------------------------------| | 15 | 38.4Kbps | |--------------+---------------------------------------------| |>> 16 | 57.6Kbps | |--------------+---------------------------------------------| | 17 | 115.2Kbps | +------------------------------------------------------------+ +------------------------------------------------------------+ | DTE SPEED OPTION | |------------------------------------------------------------| | Type: | Immediate | |--------------+---------------------------------------------| | Format: | AT [cmds] \Jn [cmds] | |--------------+---------------------------------------------| | Description: | Controls the speed of the DTE | |--------------+---------------------------------------------| | Command | Function | |--------------+---------------------------------------------| | \J0 | DCE and DTE rates are independent | +------------------------------------------------------------+ +------------------------------------------------------------+ | FAX/DATA MODE | |------------------------------------------------------------| | Type: | Register | |--------------+---------------------------------------------| | Format: | AT [cmds] S50=n [cmds] | |--------------+---------------------------------------------| | Description: | Choose data or FAX mode | |--------------+---------------------------------------------| | Command | Function | |--------------+---------------------------------------------| |>> 0 | Data mode enabled | |--------------+---------------------------------------------| | 1 | FAX mode enabled | +------------------------------------------------------------+ +------------------------------------------------------------+ | FLOW CONTROL | |------------------------------------------------------------| | Type: | Configuration | |--------------+---------------------------------------------| | Format: | AT [cmds] \Gn [cmds] | |--------------+---------------------------------------------| | Description: | Selects modem port flow control | |--------------+---------------------------------------------| | Command | Function | |--------------+---------------------------------------------| | \G0 | Flow control disabled | |--------------+---------------------------------------------| | \G1 | Flow control enabled | +------------------------------------------------------------+ +------------------------------------------------------------+ | FLOW CONTROL TYPE | |------------------------------------------------------------| | Type: | Configuration | |--------------+---------------------------------------------| | Format: | AT [cmds] \Qn [cmds] | |--------------+---------------------------------------------| | Description: | Sets type of flow control used by modem | |--------------+---------------------------------------------| | Command | Function | |--------------+---------------------------------------------| | \Q0 | Flow control disabled | |--------------+---------------------------------------------| | \Q1 | XON/XOFF flow control enabled | |--------------+---------------------------------------------| | \Q2 | Returns ERROR | |--------------+---------------------------------------------| |>> \Q3 | RTS/CTS flow control enabled | +------------------------------------------------------------+ +------------------------------------------------------------+ | INACTIVITY TIMER | |------------------------------------------------------------| | Type: | Register | |--------------+---------------------------------------------| | Format: | AT [cmds] \Tn [cmds] | |--------------+---------------------------------------------| | Default: | 0 | |--------------+---------------------------------------------| | Range: | 0-90 | |--------------+---------------------------------------------| | Unit: | Minutes | |--------------+---------------------------------------------| | Description: | Sets the length of time that the modem does | | | not receive information before it | | | disconnects | +------------------------------------------------------------+ +------------------------------------------------------------+ | PROTOCOL | |------------------------------------------------------------| | Type: | Configuration | |--------------+---------------------------------------------| | Format: | AT [cmds] \Nn [cmds] | |--------------+---------------------------------------------| | Description: | Sets connect mode | |--------------+---------------------------------------------| | Command | Function | |--------------+---------------------------------------------| | \N0 | Normal mode enabled | |--------------+---------------------------------------------| | \N1 | Direct mode enabled | |--------------+---------------------------------------------| | \N2 | MNP reliable mode enabled | |--------------+---------------------------------------------| |>> \N3 | MNP, LAP-M, or normal mode enabled | |--------------+---------------------------------------------| | \N4 | LAP-M or MNP reliable enabled | +------------------------------------------------------------+ +------------------------------------------------------------+ | EXTENDED RESULT CODES | |------------------------------------------------------------| | Type: | Configuration | |--------------+---------------------------------------------| | Format: | AT [cmds] \Vn [cmds] | |--------------+---------------------------------------------| | Example: | AT \V1 %C1 | |--------------+---------------------------------------------| | Description: | Selects extended result codes | |--------------+---------------------------------------------| | Command | Function | |--------------+---------------------------------------------| |>> \V0 | Extended result codes disabled | |--------------+---------------------------------------------| | \V1 | Extended result codes enabled | +------------------------------------------------------------+ +------------------------------------------------------------+ | PROTOCOL/SPEED | |------------------------------------------------------------| | Format | AT [cmds] S37=n [cmds] | |--------------+---------------------------------------------| | Default: | 0 | |--------------+---------------------------------------------| | Range: | 0-17 | |--------------+---------------------------------------------| | Description: | Selects switched line speed | |--------------+---------------------------------------------| | Command | Function | |--------------+---------------------------------------------| |>> S37=0 | Connect at last AT speed | |--------------+---------------------------------------------| | S37=3 | Connect at V.22 1200bps | |--------------+---------------------------------------------| | S37=6 | Connect at V.22bis 2400bps | |--------------+---------------------------------------------| | S37=7 | Connect at V.23 4800bps | |--------------+---------------------------------------------| | S37=8 | Connect at V.32/V.32bis 4800bps | |--------------+---------------------------------------------| | S37=9 | Connect at V.32/V.32bis 9600bps | |--------------+---------------------------------------------| | S37=10 | Connect at V.32bis 12.0Kbps | |--------------+---------------------------------------------| | S37=11 | Connect at V.32bis 14.4Kbps | |--------------+---------------------------------------------| | S37=12 | Connect at V.34 16.8Kbps | |--------------+---------------------------------------------| | S37=13 | Connect at V.34 19.2Kbps | |--------------+---------------------------------------------| | S37=14 | Connect at V.34 21.6Kbps | |--------------+---------------------------------------------| | S37=15 | Connect at V.34 24.0Kbps | |--------------+---------------------------------------------| | S37=16 | Connect at V.34 26.4Kbps | |--------------+---------------------------------------------| | S37=17 | Connect at V.34 28.8Kbps | +------------------------------------------------------------+ +------------------------------------------------------------+ | RESULT CODES | |------------------------------------------------------------| | Type: | Configuration | |--------------+---------------------------------------------| | Format: | AT [cmds] S41=n [cmds] | |--------------+---------------------------------------------| | Description: | Selects extended result codes | |--------------+---------------------------------------------| | Command | Function | |--------------+---------------------------------------------| |>> S41=0 | Display DTE speed | |--------------+---------------------------------------------| | S41=1 | Display carrier, protocol and compression | |--------------+---------------------------------------------| | S41=2 | Display DCE speed | +------------------------------------------------------------+ +------------------------------------------------------------+ | V42bis COMPRESSION | |------------------------------------------------------------| | Type: | Configuration | |--------------+---------------------------------------------| | Format: | AT [cmds] "Hn [cmds] | |--------------+---------------------------------------------| | Description: | Controls V.42bis compression | |--------------+---------------------------------------------| | Command | Function | |--------------+---------------------------------------------| | "H0 | V.42bis disabled | |--------------+---------------------------------------------| | "H1 | V.42bis while transmit enabled | |--------------+---------------------------------------------| | "H2 | Returns ERROR | |--------------+---------------------------------------------| |>> "H3 | V.42bis during transmitting and receiving | | | enabled | +------------------------------------------------------------+ +------------------------------------------------------------+ | V.32 RETRAIN | |------------------------------------------------------------| | Type: | Register | |--------------+---------------------------------------------| | Format: | AT [cmds] S42=n [cmds] | |--------------+---------------------------------------------| | Range: | 0 - 2 | |--------------+---------------------------------------------| | Unit: | Bit-mapped | |--------------+---------------------------------------------| | Description: | Selects action the modem will take during | | | bad line quality on V.32/32bis connection | |--------------+---------------------------------------------| | Command | Function | |--------------+---------------------------------------------| |>> S42=0 | Auto-retrain disabled, hang up | |--------------+---------------------------------------------| | S42=1 | Auto-retrain on line quality problem | | | enabled | |--------------+---------------------------------------------| | S42=2 | Modem ignores line quality problems | +------------------------------------------------------------+ +------------------------------------------------------------+ | XON/XOFF PASS-THROUGH | |------------------------------------------------------------| | Type: | Configuration | |--------------+---------------------------------------------| | Format: | AT [cmds] \Xn [cmds] | |--------------+---------------------------------------------| | Description: | Selects whether XON/XOFF signals are sent | | | to remote modem | |--------------+---------------------------------------------| | Command | Function | |--------------+---------------------------------------------| |>> \X0 | XON/XOFF signals trapped by local modem | |--------------+---------------------------------------------| | \X1 | XON/XOFF passed through local modem | +------------------------------------------------------------+