BOCA RESEARCH, INC. =================== SOUND EXPRESSION 14.4VSP (SE1440) Modem Type Data (synchronous/asynchronous)/Fax/Voice Maximum Data Rate 14.4Kbps Maximum Fax Rate 14.4Kbps Data Bus 16-bit ISA Fax Class Class I Data Modulation Bell 103A/212A Protocol ITU-T V.22, V.22bis, V.32, V.32bis Fax Modulation ITU-T V.17, V.21CH2, V.27ter, V.29 Protocol Error MNP5, V.42, V.42bis Correction/Compression +------------------------------------------------------------+ | CONNECTIONS | |------------------------------------------------------------| | Purpose | Location | Purpose | Location | |-----------------+----------+--------------------+----------| | Panasonic | CN1 | Line in | CN8 | | CD-ROM | | | | | interface | | | | |-----------------+----------+--------------------+----------| | IDE CD-ROM | CN2 | Microphone in | CN9 | | interface | | | | |-----------------+----------+--------------------+----------| | Mitsumi CD-ROM | CN3 | Modem line out | CN10 | | interface | | | | |-----------------+----------+--------------------+----------| | Sony CD-ROM | CN4 | Sony/IDE CD-ROM | CN11 | | interface | | audio | | |-----------------+----------+--------------------+----------| | Game/MIDI port | CN5 | Panasonic CD-ROM | CN12 | | | | audio | | |-----------------+----------+--------------------+----------| | Speaker out | CN6 | Mitsumi CD-ROM | CN13 | | | | audio | | |-----------------+----------+--------------------+----------| | Line out | CN7 | Wavetable | CN14 | | | | daughterboard | | | | | connector | | +------------------------------------------------------------+ +------------------------------------------------------------+ | USER CONFIGURABLE SETTINGS | |------------------------------------------------------------| | Function | Label | Position | |----------------------------+-----------+-------------------| | IDE CD-ROM enabled | J6 | Pins 1 & 2 closed | |----------------------------+-----------+-------------------| | IDE CD-ROM disabled | J6 | Pins 2 & 3 closed | +------------------------------------------------------------+ +------------------------------------------------------------+ | BASE I/O ADDRESS SELECTION | |------------------------------------------------------------| | Port | JP1/A | JP1/B | JP1/C | JP1/D | |----------------+----------+----------+----------+----------| | i COM1: (3F8h) | Open | Closed | Open | Closed | |----------------+----------+----------+----------+----------| |>> COM2: (2F8h) | Open | Closed | Closed | Open | |----------------+----------+----------+----------+----------| | i COM3: (3E8h) | Closed | Open | Open | Closed | |----------------+----------+----------+----------+----------| | i COM4: (2E8h) | Closed | Open | Closed | Open | +------------------------------------------------------------+ +------------------------------------------------------------+ | INTERRUPT SELECTION | |------------------------------------------------------------| | IRQ | JP1/E | JP1/F | JP1/G | JP1/H | |---------+------------+------------+------------+-----------| |>> 3 | Open | Open | Open | Closed | |---------+------------+------------+------------+-----------| | i 4 | Open | Open | Closed | Open | |---------+------------+------------+------------+-----------| | i 5 | Open | Closed | Open | Open | |---------+------------+------------+------------+-----------| | i 7 | Closed | Open | Open | Open | +------------------------------------------------------------+ Proprietary AT Command Set +------------------------------------------------------------+ | ACCEPT RELIABLE MODE | |------------------------------------------------------------| | Type: | Immediate | |--------------+---------------------------------------------| | Format: | AT [cmds] \U | |--------------+---------------------------------------------| | Example: | AT \U | |--------------+---------------------------------------------| | Description: | Accepts remote modem's request for reliable | | | link. | +------------------------------------------------------------+ +------------------------------------------------------------+ | AUTO FALL FORWARD/FALLBACK | |------------------------------------------------------------| | Type: | Configuration | |--------------+---------------------------------------------| | Format: | AT [cmds] %Gn [cmds] | |--------------+---------------------------------------------| | Example: | AT %G1 &W0 | |--------------+---------------------------------------------| | Description: | Selects auto fallback. | |--------------+---------------------------------------------| | i Command | Function | |--------------+---------------------------------------------| | i %G0 | Fallback disabled. | |--------------+---------------------------------------------| |>> %G1 | Fallback enabled. | +------------------------------------------------------------+ +------------------------------------------------------------+ | AUTO-RELIABLE FALLBACK CHARACTER | |------------------------------------------------------------| | Type: | Configuration | |--------------+---------------------------------------------| | Format: | AT [cmds] %An [cmds] | |--------------+---------------------------------------------| | Example: | AT %A20 | |--------------+---------------------------------------------| | Default: | 13 | |--------------+---------------------------------------------| | Range: | 0-127 | |--------------+---------------------------------------------| | Unit: | ASCII | |--------------+---------------------------------------------| | Description: | Sets the character used as the | | | auto-reliable fallback character. %A0 will | | | disable this function. | +------------------------------------------------------------+ +------------------------------------------------------------+ | AUTO-RETRAIN | |------------------------------------------------------------| | Type: | Configuration | |--------------+---------------------------------------------| | Format: | AT [cmds] %En [cmds] | |--------------+---------------------------------------------| | Example: | AT %E1 %Q | |--------------+---------------------------------------------| | Description: | Selects auto-retrain mode. | |--------------+---------------------------------------------| | i Command | Function | |--------------+---------------------------------------------| |>> %E0 | Auto-retrain disabled. | |--------------+---------------------------------------------| | i %E1 | Auto-retrain enabled. | +------------------------------------------------------------+ +------------------------------------------------------------+ | BREAK SEND | |------------------------------------------------------------| | Type: | Configuration | |--------------+---------------------------------------------| | Format: | AT [cmds] \Bn [cmds] | |--------------+---------------------------------------------| | Example: | AT \B3 &W | |--------------+---------------------------------------------| | Default: | 3 | |--------------+---------------------------------------------| | Range: | 1-9 | |--------------+---------------------------------------------| | Unit: | .1 second | |--------------+---------------------------------------------| | Description: | Sends break to modem. | +------------------------------------------------------------+ +----------------------------------------------------------------+ | BREAK TYPE | |----------------------------------------------------------------| |Type: |Configuration | |------------------+---------------------------------------------| |Format: |AT [cmds] \Kn [cmds] | |------------------+---------------------------------------------| |Example: |AT \K1 | |------------------+---------------------------------------------| |Description: |Configures action of break signal. | |----------------------------------------------------------------| | Command |Break from DTE | Break from | Modem | Break from | | | | DTE |receives \B |remote modem| | |Reliable/Normal| | | | | | mode |Direct mode | | | |---------+---------------+------------+------------+------------| | i \K0 |Enter command |Send break |Buffers |Buffers | | |mode, do not |to remote |cleared and |cleared and | | |send break to |modem |break sent |break sent | | |remote modem. |immediately,|to remote |to DTE. | | | |then enter |modem. | | | | |command | | | | | |mode. | | | |---------+---------------+------------+------------+------------| | i \K1 |Buffers cleared|Send break |Buffers |Buffers | | |and break sent |to remote |cleared and |cleared and | | |to remote |modem |break sent |break sent | | |modem. |immediately.|to remote |to DTE. | | | | |modem. | | |---------+---------------+------------+------------+------------| | i \K2 |Enter command |Send break |Send break |Send break | | |mode, do not |to remote |to remote |to DTE | | |send break to |modem |modem |immediately.| | |remote modem. |immediately,|immediately.| | | | |then enter | | | | | |command | | | | | |mode. | | | |---------+---------------+------------+------------+------------| | i \K3 |Send break to |Send break |Send break |Send break | | |remote modem |to remote |to remote |to DTE | | |immediately. |modem |modem |immediately.| | | |immediately.|immediately.| | |---------+---------------+------------+------------+------------| | i \K4 |Enter command |Send break |Send break |Break sent | | |mode, do not |to remote |to remote |with | | |send break to |modem |modem with |received | | |remote modem. |immediately,|transmitted |data to the | | | |then enter |data. |DTE. | | | |command | | | | | |mode. | | | |---------+---------------+------------+------------+------------| |>> \K5 |Send break with|Send break |Send break |Break sent | | |transmitted |to remote |to remote |with | | |data. |modem |modem with |received | | | |immediately.|transmitted |data to the | | | | |data. |DTE. | +----------------------------------------------------------------+ +------------------------------------------------------------+ | CALLING TONE | |------------------------------------------------------------| | Type: | Configuration | |--------------+---------------------------------------------| | Format: | AT [cmds] -Cn [cmds] | |--------------+---------------------------------------------| | Example: | AT -C0 &W | |--------------+---------------------------------------------| | Description: | Controls whether the DTE will allow the | | | modem to send a 1300Hz calling tone when | | | originating. | |--------------+---------------------------------------------| | i Command | Function | |--------------+---------------------------------------------| |>> -C0 | Disable calling tone. | |--------------+---------------------------------------------| | i -C1 | Enable calling tone. | +------------------------------------------------------------+ +------------------------------------------------------------+ | CONNECT MODE | |------------------------------------------------------------| | Type: | Configuration | |--------------+---------------------------------------------| | Format: | AT [cmds] \Nn [cmds] | |--------------+---------------------------------------------| | Example: | AT \N1 DT555-1212 | |--------------+---------------------------------------------| | Description: | Sets connect mode. | |--------------+---------------------------------------------| | i Command | Function | |--------------+---------------------------------------------| | i \N0 | Normal mode enabled. | |--------------+---------------------------------------------| | I \N1 | Direct mode enabled | |--------------+---------------------------------------------| | i \N2 | Reliable mode enabled. | |--------------+---------------------------------------------| |>> \N3 | V.42 auto-reliable mode enabled. | |--------------+---------------------------------------------| | i \N4 | LAPM mode enabled. | +------------------------------------------------------------+ +------------------------------------------------------------+ | CONVERT TO RELIABLE MODE | |------------------------------------------------------------| | Type: | Immediate | |--------------+---------------------------------------------| | Format: | AT [cmds] \Y | |--------------+---------------------------------------------| | Example: | AT \Y | |--------------+---------------------------------------------| | Description: | Initiates reliable mode link. | +------------------------------------------------------------+ +------------------------------------------------------------+ | FLOW CONTROL | |------------------------------------------------------------| | Type: | Configuration | |--------------+---------------------------------------------| | Format: | AT [cmds] \Gn [cmds] | |--------------+---------------------------------------------| | Example: | AT \G1 &K3 | |--------------+---------------------------------------------| | Description: | Selects modem port flow control. | |--------------+---------------------------------------------| | Command | Function | |--------------+---------------------------------------------| |>> \G0 | Flow control disabled. | |--------------+---------------------------------------------| | i \G1 | Flow control enabled. | +------------------------------------------------------------+ +------------------------------------------------------------+ | FLOW CONTROL TYPE | |------------------------------------------------------------| | Type: | Configuration | |--------------+---------------------------------------------| | Format: | AT [cmds] \Qn [cmds] | |--------------+---------------------------------------------| | Example: | AT \Q0 \K3 | |--------------+---------------------------------------------| | Description: | Sets type of flow control used by modem. | |--------------+---------------------------------------------| | i Command | Function | |--------------+---------------------------------------------| | i \Q0 | Flow control disabled. | |--------------+---------------------------------------------| | i \Q1 | XON/XOFF flow control enabled. | |--------------+---------------------------------------------| | i \Q2 | CTS flow control to DTE enabled. | |--------------+---------------------------------------------| |>> \Q3 | RTS/CTS flow control enabled. | +------------------------------------------------------------+ +------------------------------------------------------------+ | INACTIVITY TIMER | |------------------------------------------------------------| | Type: | Configuration | |--------------+---------------------------------------------| | Format: | AT [cmds] \Tn [cmds] | |--------------+---------------------------------------------| | Example: | AT\T20 | |--------------+---------------------------------------------| | Default: | 0 | |--------------+---------------------------------------------| | Range: | 0-90 | |--------------+---------------------------------------------| | Unit: | 1 minutes | |--------------+---------------------------------------------| | Description: | Sets the length of time that the modem does | | | not receive information before it | | | disconnects. | +------------------------------------------------------------+ +------------------------------------------------------------+ | INACTIVITY TIMER | |------------------------------------------------------------| | Type: | Register | |--------------+---------------------------------------------| | Format: | AT [cmds] S90=n [cmds] | |--------------+---------------------------------------------| | Example: | ATS90=20 | |--------------+---------------------------------------------| | Default: | 0 | |--------------+---------------------------------------------| | Range: | 0-255 | |--------------+---------------------------------------------| | Unit: | 1 minute | |--------------+---------------------------------------------| | Description: | Sets the length of time that the modem does | | | not receive information before it | | | disconnects. S90=0 will disable. | +------------------------------------------------------------+ +------------------------------------------------------------+ | LOCK SERIAL PORT | |------------------------------------------------------------| | Type: | Configuration | |--------------+---------------------------------------------| | Format: | AT [cmds] \Jn [cmds] | |--------------+---------------------------------------------| | Example: | AT %B1 \J0 | |--------------+---------------------------------------------| | Description: | Sets operation of serial port speed. | |--------------+---------------------------------------------| | i Command | Function | |--------------+---------------------------------------------| |>> \J0 | Serial speed locked. | |--------------+---------------------------------------------| | i \J1 | Serial speed follows connect speed. | +------------------------------------------------------------+ +------------------------------------------------------------+ | MAXIMUM BLOCK SIZE FOR TRANSMISSION | |------------------------------------------------------------| | Type: | Configuration | |--------------+---------------------------------------------| | Format: | AT [cmds] \An [cmds] | |--------------+---------------------------------------------| | Example: | AT \A3 %E1 | |--------------+---------------------------------------------| | Description: | Sets the maximum transmittable block size. | |--------------+---------------------------------------------| | i Command | Function | |--------------+---------------------------------------------| | i \A0 | MNP block size is 64 characters. | |--------------+---------------------------------------------| | i \A1 | MNP block size is 128 characters. | |--------------+---------------------------------------------| | i \A2 | MNP block size is 192 characters. | |--------------+---------------------------------------------| |>> \A3 | MNP block size is 256 characters. | +------------------------------------------------------------+ +------------------------------------------------------------+ | ON-LINE IN RELIABLE MODE | |------------------------------------------------------------| | Type: | Immediate | |--------------+---------------------------------------------| | Format: | AT [cmds] \O | |--------------+---------------------------------------------| | Example: | AT \O | |--------------+---------------------------------------------| | Description: | Returns to on-line and requests reliable | | | mode connection. | +------------------------------------------------------------+ +------------------------------------------------------------+ | REPORT SIGNAL QUALITY | |------------------------------------------------------------| | Type: | Immediate | |--------------+---------------------------------------------| | Format: | AT [cmds] %Q [cmds] | |--------------+---------------------------------------------| | Example: | AT %Q | |--------------+---------------------------------------------| | Description: | Reports signal quality. If the value is | | | greater than 7, the modem will retrain when | | | %E1 is set. | +------------------------------------------------------------+ +------------------------------------------------------------+ | RESULT CODE FORMAT | |------------------------------------------------------------| | Type: | Configuration | |--------------+---------------------------------------------| | Format: | AT [cmds] \Vn [cmds] | |--------------+---------------------------------------------| | Example: | AT \V0 Q0 | |--------------+---------------------------------------------| | Description: | Selects result codes from ATV command, MNP | | | or V.42. | |--------------+---------------------------------------------| | Command | Function | |--------------+---------------------------------------------| | i \V0 | ATV command defined result codes enabled. | |--------------+---------------------------------------------| |>> \V1 | Modified MNP result codes enabled. | |--------------+---------------------------------------------| | i \V2 | Extended V.42 result codes enabled. | +------------------------------------------------------------+ +------------------------------------------------------------+ | SWITCH TO MNP MODE | |------------------------------------------------------------| | Type: | Immediate | |--------------+---------------------------------------------| | Format: | AT [cmds] \Z | |--------------+---------------------------------------------| | Example: | AT \Z | |--------------+---------------------------------------------| | Description: | Switches to normal mode from MNP mode. | +------------------------------------------------------------+ +------------------------------------------------------------+ | XON/XOFF PASS-THROUGH | |------------------------------------------------------------| | Type: | Configuration | |--------------+---------------------------------------------| | Format: | AT [cmds] \Xn [cmds] | |--------------+---------------------------------------------| | Example: | AT \X0 \U | |--------------+---------------------------------------------| | Description: | Selects whether XON/XOFF signals are sent | | | to remote modem. | |--------------+---------------------------------------------| | i Command | Function | |--------------+---------------------------------------------| |>> \X0 | XON/XOFF signals trapped by local modem. | |--------------+---------------------------------------------| | i \X1 | XON/XOFF passed through local modem. | +------------------------------------------------------------+