BEST DATA PRODUCTS, INC. ======================== 9624 FQ Modem Type Data (synchronous/asynchronous)/Fax Maximum Data Rate 2400bps Maximum Fax Rate 9600bps Data Bus 8-bit ISA Fax Class Class 1 Data Modulation Protocol Bell 103 & 212A ITU-T V.21 & V.22/V.22bis Fax Modulation Protocol Unidentified Error Unidentified Correction/Compression +------------------------------------------------------------+ | CONNECTIONS | |------------------------------------------------------------| | Purpose | Location | Purpose | Location | |-------------------+----------+------------------+----------| | Line-in or | CN1 | Line-in or | CN2 | | line-out | | line-out | | +------------------------------------------------------------+ +------------------------------------------------------------+ | PORT CONFIGURATION - JP1 | |------------------------------------------------------------| |i COM/IRQ|Jumper A|Jumper B|Jumper C|Jumper |Jumper |Jumper | | | | | | D | E | F | |---------+--------+--------+--------+-------+-------+-------| |>> | Open | Closed | Closed | Open | Open |Closed | |COM2/IRQ3| | | | | | | |---------+--------+--------+--------+-------+-------+-------| | i | Closed | Open | Open |Closed | Open |Closed | |COM1/IRQ4| | | | | | | |---------+--------+--------+--------+-------+-------+-------| | i | Closed | Open | Open |Closed |Closed | Open | |COM3/IRQ4| | | | | | | |---------+--------+--------+--------+-------+-------+-------| | i | Open | Closed | Closed | Open |Closed | Open | |COM4/IRQ3| | | | | | | +------------------------------------------------------------+ +------------------------------------------------------------+ | %J - PROPRIETARY COMMAND | |------------------------------------------------------------| | Type: | Immediate | |---------------+--------------------------------------------| | Format: | %Jn [cmds] | |---------------+--------------------------------------------| | Example: | %J | |---------------+--------------------------------------------| | Description | Resets the configuration to the &F profile | | | with the following exceptions: | |------------------------------------------------------------| | Command/Register | %J Configuration: | |------------------+-----------------------------------------| | %Dn | Sets DTMF attenuation to 2dB (%D1). | |------------------+-----------------------------------------| | %Ln | Sets attenuation to 6dB (%L3). | |------------------+-----------------------------------------| | S6 | Wait for dial tone set to 3 seconds (S3 | | | = 3). | |------------------+-----------------------------------------| | S11 | DTMF tone duration set to 95ms (S11 = | | | 95). | +------------------------------------------------------------+ +------------------------------------------------------------+ | %D - PROPRIETARY COMMAND | |------------------------------------------------------------| | Type: | Configuration | |-------------+----------------------------------------------| | Format: | AT [cmds] %Dn [cmds] | |-------------+----------------------------------------------| | Example: | AT M3 %D3 D5555555 | |-------------+----------------------------------------------| | Description | Sets the DTMF transmit level attenuation. | |------------------------------------------------------------| | i Command | Function | |--------------------------+---------------------------------| | i %D0 | 0dB attenuation. | |--------------------------+---------------------------------| |>> %D1 | 2dB attenuation. | |--------------------------+---------------------------------| | i %D2 | 4dB attenuation. | |--------------------------+---------------------------------| | i %D3 | 6dB attenuation. | |--------------------------+---------------------------------| | i %D4 | 8dB attenuation. | |--------------------------+---------------------------------| | i %D5 | 10dB attenuation. | |--------------------------+---------------------------------| | i %D6 | 12dB attenuation. | |--------------------------+---------------------------------| | i %D7 | 14dB attenuation. | +------------------------------------------------------------+ +------------------------------------------------------------+ | %L - PROPRIETARY COMMAND | |------------------------------------------------------------| | Type: | Configuration | |-------------+----------------------------------------------| | Format: | AT [cmds] %Ln [cmds] | |-------------+----------------------------------------------| | Example: | AT M3 %L5 D5555555 | |-------------+----------------------------------------------| | Description | Sets the transmit level attenuation. | |------------------------------------------------------------| | i Command | Function | |-----------------------+------------------------------------| | i %L0 | 0dB attenuation. | |-----------------------+------------------------------------| | i %L1 | 2dB attenuation. | |-----------------------+------------------------------------| | i %L2 | 4dB attenuation. | |-----------------------+------------------------------------| |>> %L3 | 6dB attenuation. | |-----------------------+------------------------------------| | i %L4 | 8dB attenuation. | |-----------------------+------------------------------------| | i %L5 | 10dB attenuation. | |-----------------------+------------------------------------| | i %L6 | 12dB attenuation. | |-----------------------+------------------------------------| | i %L7 | 14dB attenuation. | +------------------------------------------------------------+ +------------------------------------------------------------+ | S21 - PROPRIETARY BIT-MAPPED REGISTER | |------------------------------------------------------------| | Value Range: | Bit-mapped | |-----------------+------------------------------------------| | Default: | 0 | |-----------------+------------------------------------------| | Type: | Read/Write | |-----------------+------------------------------------------| | In Stored | Yes | | Profile?: | | |-----------------+------------------------------------------| | Description: | Bit-mapped configuration register. | |------------------------------------------------------------| | Bit | i | Function | | | Value | | |-----------+-------+----------------------------------------| | 0 |>> 0 | RJ-11/RJ-41S/RJ-45S-type jack used. | | | | | | | i 1 | RJ-12/RJ-13-type jack used. | |-----------+-------+----------------------------------------| | 1 |>> 0 | Not used. | |-----------+-------+----------------------------------------| | 2 |>> 0 | CTS signal follows RTS signal. | | | | | | | i 1 | CTS signal follows DCD signal. | |-----------+-------+----------------------------------------| | 4, 3 |>> 00 | Modem ignores DTR signal. | | | | | | | i 01 | Modem switches to command mode when a | | | | DTR signal is detected. | | | i 10 | | | | | Modem hangs up when a DTR signal is | | | i 11 | detected. | | | | | | | | Modem resets to &F defaults when a DTR | | | | signal is detected. | |-----------+-------+----------------------------------------| | 5 |>> 0 | DCD enabled. | | | | | | | i 1 | DCD enabled when a carrier signal is | | | | detected, disabled when carrier signal | | | | is lost. | |-----------+-------+----------------------------------------| | 6 |>> 0 | DSR enabled. | | | | | | | i 1 | Modem goes off-hook in data mode only. | |-----------+-------+----------------------------------------| | 7 |>> 0 | Long-space disconnect function | | | | disabled (Y0). | | | i 1 | | | | | Long-space disconnect function enabled | | | | (Y1). | +------------------------------------------------------------+ +------------------------------------------------------------+ | S27 - PROPRIETARY BIT-MAPPED REGISTER | |------------------------------------------------------------| | Value Range: | Bit-mapped | |------------------+-----------------------------------------| | Default: | 0 | |------------------+-----------------------------------------| | Type: | Read/Write | |------------------+-----------------------------------------| | In Stored | Yes | | Profile?: | | |------------------+-----------------------------------------| | Description: | Bit-mapped configuration register. | |------------------------------------------------------------| | Bit | Value | Function | |----------+--------+----------------------------------------| | 1,0 | i 00 | Asynchronous mode enabled. | | | | | | | 01 | Not used. | | | | | | | 10 | Not used. | | | | | | | 11 | Not used. | |----------+--------+----------------------------------------| | 2 | i 0 | Dial-up line mode enabled. | | | | | | | 1 | Leased-line mode enabled. | |----------+--------+----------------------------------------| | 4,3 | i 00 | Transmit clock generated by the modem. | | | | | | | 01 | Not used. | | | | | | | 10 | Not used. | | | | | | | 11 | Not used. | |----------+--------+----------------------------------------| | 5 | i 0 | CCITT V.22/V.22bis protocols enabled. | | | | | | | 1 | Bell 212A protocol enabled. | |----------+--------+----------------------------------------| | 6 | i 0 | Not used. | |----------+--------+----------------------------------------| | 7 | i 0 | Not used. | +------------------------------------------------------------+ +------------------------------------------------------------+ | S22 - PROPRIETARY BIT-MAPPED REGISTER | |------------------------------------------------------------| | Value Range: | Bit-mapped | |-----------------+------------------------------------------| | Default: | 118 | |-----------------+------------------------------------------| | Type: | Read/Write | |-----------------+------------------------------------------| | In Stored | Yes | | Profile?: | | |-----------------+------------------------------------------| | Description: | Bit-mapped configuration register. | |------------------------------------------------------------| | Bit | Value | Function | |-----------+--------+---------------------------------------| | 1, 0 |>> 10 | Speaker set to medium volume. | | | | | | | i 00 | Not used. | | | | | | | i 01 | Speaker set to low volume. | | | | | | | i 11 | Speaker set to high volume. | |-----------+--------+---------------------------------------| | 3,2 |>> 01 | Speaker enabled while dialing, | | | | enabled until carrier signal is | | | i 00 | detected, then disabled. | | | | | | | i 10 | Speaker disabled. | | | | | | | i 11 | Speaker enabled. | | | | | | | | Speaker disabled while dialing, | | | | enabled until carrier signal is | | | | detected, then disabled. | |-----------+--------+---------------------------------------| | 6,5,4 |>> 111 | Full result codes, dial tone wait, | | | | and busy tone detect enabled. | | | i 000 | | | | | Basic result codes enabled, blind | | | i 001 | dialing only. | | | | | | | i 010 | Not used. | | | | | | | i 011 | Not used. | | | | | | | i 100 | Not used. | | | | | | | i 101 | Full result codes enabled, blind | | | | dialing only. | | | i 110 | | | | | Full result codes and dial tone wait | | | | enabled. | | | | | | | | Full result codes enabled, blind | | | | dialing only, busy tone detect | | | | enabled. | |-----------+--------+---------------------------------------| | 7 |>> 0 | 39/61 make/break ratio enabled. | | | | | | | i 1 | 33/67 make/break ratio enabled. | +------------------------------------------------------------+ +------------------------------------------------------------+ | S23 - PROPRIETARY BIT-MAPPED REGISTER | |------------------------------------------------------------| | Value Range: | Bit-mapped | |---------------------+--------------------------------------| | Default: | 7 | |---------------------+--------------------------------------| | Type: | Read/Write | |---------------------+--------------------------------------| | In Stored Profile?: | Yes | |---------------------+--------------------------------------| | Description: | Bit-mapped configuration register. | |------------------------------------------------------------| | Bit | Value | Function | |-------------+---------+------------------------------------| | 0 |>> 1 | Grant remote loopback request. | | | | | | | i 0 | Ignore remote loopback request. | |-------------+---------+------------------------------------| | 2,1 |>> 11 | 2400bps data rate enabled. | | | | | | | i 00 | 0 - 300bps data rate enabled. | | | | | | | i 01 | 600bps data rate enabled. | | | | | | | i 10 | 1200bps data rate enabled. | |-------------+---------+------------------------------------| | 3 |>> 0 | Not used. | |-------------+---------+------------------------------------| | 5,4 |>> 00 | Even parity enabled. | | | | | | | i 01 | Space parity enabled. | | | | | | | i 10 | Odd parity enabled. | | | | | | | i 11 | Parity disabled. | |-------------+---------+------------------------------------| | 7,6 |>> 00 | Guard tone disabled. | | | | | | | i 01 | 550Hz guard tone enabled. | | | | | | | i 10 | 1800Hz guard tone enabled. | | | | | | | i 11 | Not used. | +------------------------------------------------------------+ +------------------------------------------------------------+ | S28 - PROPRIETARY BIT-MAPPED REGISTER | |------------------------------------------------------------| | Value Range: | Bit-mapped | |-----------------+------------------------------------------| | Default: | 140 | |-----------------+------------------------------------------| | Type: | Read/Write | |-----------------+------------------------------------------| | In Stored | Yes | | Profile?: | | |-----------------+------------------------------------------| | Description: | Bit-mapped configuration register. | |------------------------------------------------------------| | Bit | Value | Function | |-----------+--------+---------------------------------------| | 2,1,0 | i 000 | 0dB transmit level attenuation | | | | selected. | | | i 001 | | | | | 2dB transmit level attenuation | | | i 010 | selected. | | | | | | | i 011 | 4dB transmit level attenuation | | | | selected. | | |>> 100 | | | | | 6dB transmit level attenuation | | | i 101 | selected. | | | | | | | i 110 | 8dB transmit level attenuation | | | | selected. | | | i 111 | | | | | 10dB transmit level attenuation | | | | selected. | | | | | | | | 12dB transmit level attenuation | | | | selected. | | | | | | | | 14dB transmit level attenuation | | | | selected. | |-----------+--------+---------------------------------------| | 5,4,3 | i 000 | 0dB transmit level attenuation | | | | selected. | | |>> 001 | | | | | 2dB transmit level attenuation | | | i 010 | selected. | | | | | | | i 011 | 4dB transmit level attenuation | | | | selected. | | | i 100 | | | | | 6dB transmit level attenuation | | | i 101 | selected. | | | | | | | i 110 | 8dB transmit level attenuation | | | | selected. | | | i 111 | | | | | 10dB transmit level attenuation | | | | selected. | | | | | | | | 12dB transmit level attenuation | | | | selected. | | | | | | | | 14dB transmit level attenuation | | | | selected. | |-----------+--------+---------------------------------------| | 6 |>> 0 | 10 pulses per second dial signal | | | | enabled. | | | i 1 | | | | | 20 pulses per second dial signal | | | | enabled. | |-----------+--------+---------------------------------------| | 7 |>> 1 | %J resets secondary default. | | | | | | | i 0 | &F resets secondary default. | +------------------------------------------------------------+