SONY CORPORATION
================

   CDU-55E

   Device Type       CD-ROM                                       
   Interface         ATAPI                                        
   Spin Rate         2x                                           
   Formats Supported CD Bridge, CD-DA, CD-XA (mode 2, form 1 &    
                     2), CD-I (mode 2, form 1 & 2), CD-I Ready,   
                     CD-ROM (mode 1 & 2), Photo-CD                
   View              Top                                          

<gopher://bitreich.org/I/th99/r/S-T/60030-1.png>
   

   +------------------------------------------------------------+
   |                        CONNECTIONS                         |
   |------------------------------------------------------------|
   |     Function      | Label |        Function        | Label |
   |-------------------+-------+------------------------+-------|
   | Audio line out    |  CN1  | Frame ground terminal  |  CN2  |
   +------------------------------------------------------------+

   +------------------------------------------------------------+
   |                     ATAPI MASTER/SLAVE                     |
   |------------------------------------------------------------|
   |          Setting          |  JP1/1   |  JP1/2   |  JP1/3   |
   |---------------------------+----------+----------+----------|
   |     | Single drive only   |  Closed  |   Open   |   Open   |
   |-----+---------------------+----------+----------+----------|
   |>>   | Master in two drive |  Closed  |   Open   |   Open   |
   |     | system              |          |          |          |
   |-----+---------------------+----------+----------+----------|
   |     | Slave in two drive  |   Open   |  Closed  |   Open   |
   |     | system              |          |          |          |
   |-----+---------------------+----------+----------+----------|
   |     | Master/Slave        |   Open   |   Open   |  Closed  |
   |     | determined by Cable |          |          |          |
   |     | Select              |          |          |          |
   |------------------------------------------------------------|
   |          Note: 'Single drive' refers to the sole drive     |
   |      connected to an IDE interface (there may be up to two |
   |         on a given system). Master & Slave refer to two    |
   |                drives connected to an interface.           |
   +------------------------------------------------------------+