XIRCOM, INC.
============

   CE3-10BT

   Card Type              Network Interface Card                  
   NIC Type               Ethernet                                
   Maximum Onboard Memory Unidentified                            
   Boot ROM               Not available                           
   Network Transfer Rate  10Mbps                                  
   Topology               Star                                    
   Wiring Type            Unshielded twisted pair                 
   Data Bus               PMCIA Type II                           

<gopher://bitreich.org/I/th99/n/U-Z/42057-1.png>
   

   +------------------------------------------------------------+
   |                        CONNECTIONS                         |
   |------------------------------------------------------------|
   |                Function                 |      Label       |
   |-----------------------------------------+------------------|
   | RJ-45 unshielded twisted pair connector |       CN1        |
   +------------------------------------------------------------+

   +------------------------------------------------------------+
   |                     DIAGNOSTIC LED(S)                      |
   |------------------------------------------------------------|
   | LED | Color  | Status |             Condition              |
   |-----+--------+--------+------------------------------------|
   | TA  | Yellow |   On   | Data is being transmitted/received |
   |-----+--------+--------+------------------------------------|
   | TA  | Yellow |  Off   |         Data is not being          |
   |     |        |        |        transmitted/received        |
   |-----+--------+--------+------------------------------------|
   | LI  | Green  |   On   |     10Base-T UTP link is good      |
   |-----+--------+--------+------------------------------------|
   | LI  | Green  |  Off   |    10Base-T UTP link is broken     |
   +------------------------------------------------------------+

   +------------------------------------------------------------+
   |               MISCELLANEOUS TECHNICAL NOTES                |
   |------------------------------------------------------------|
   | The 15-pin connector must be attached to the set of pins   |
   | to the left side (with the company logo facing up) of the  |
   | end of the card.                                           |
   +------------------------------------------------------------+