PURE DATA, LTD.
===============

   PDI7023-16FL

   NIC Type      Ethernet                                         
   Transfer Rate 10Mbps                                           
   Data Bus      16-bit ISA                                       
   Topology      Star                                             
   Wiring Type   62.5/125 m m Fiber optic cable (e.g. Belden      
                 227412)                                          
   Boot ROM      Not available                                    

<gopher://bitreich.org/I/th99/n/P-R/40489-1.png>
   

+---------------------------------------------------------------------------+
|                             INTERRUPT REQUEST                             |
|---------------------------------------------------------------------------|
| IRQ | E2A  | E2B  | E2C  | E2D  | E2E  | E2F  | E2G  | E2H  | E2I  | E2J  |
|-----+------+------+------+------+------+------+------+------+------+------|
| |2/9| Open | Open | Open | Open |Closed| Open | Open | Open | Open | Open |
|-+---+------+------+------+------+------+------+------+------+------+------|
| | 3 | Open | Open | Open | Open | Open | Open | Open | Open | Open |Closed|
|-+---+------+------+------+------+------+------+------+------+------+------|
|>>| 4 | Open | Open | Open | Open | Open | Open | Open | Open |Closed| Open |
|-+---+------+------+------+------+------+------+------+------+------+------|
| | 5 | Open | Open | Open | Open | Open | Open | Open |Closed| Open | Open |
|-+---+------+------+------+------+------+------+------+------+------+------|
| | 6 | Open | Open | Open | Open | Open | Open |Closed| Open | Open | Open |
|-+---+------+------+------+------+------+------+------+------+------+------|
| | 7 | Open | Open | Open | Open | Open |Closed| Open | Open | Open | Open |
|-+---+------+------+------+------+------+------+------+------+------+------|
| |10 | Open | Open | Open |Closed| Open | Open | Open | Open | Open | Open |
|-+---+------+------+------+------+------+------+------+------+------+------|
| |11 | Open | Open |Closed| Open | Open | Open | Open | Open | Open | Open |
|-+---+------+------+------+------+------+------+------+------+------+------|
| |12 | Open |Closed| Open | Open | Open | Open | Open | Open | Open | Open |
|-+---+------+------+------+------+------+------+------+------+------+------|
| |15 |Closed| Open | Open | Open | Open | Open | Open | Open | Open | Open |
+---------------------------------------------------------------------------+

   +------------------------------------------------------------+
   |                      LOOP BACK ENABLE                      |
   |------------------------------------------------------------|
   |           Setting           |              E7              |
   |-----------------------------+------------------------------|
   |>>         |    Disabled     |      Pins 1 & 2 closed       |
   |-----------+-----------------+------------------------------|
   |           |     Enabled     |      Pins 2 & 3 closed       |
   |------------------------------------------------------------|
   | Note:The loop back is used with diagnostic software to     |
   | trouble-shoot the card.                                    |
   +------------------------------------------------------------+

   +------------------------------------------------------------+
   |                      I/O BASE ADDRESS                      |
   |------------------------------------------------------------|
   |     Address     |    SW1/1     |    SW1/2    |    SW1/3    |
   |-----------------+--------------+-------------+-------------|
   |   |    260h     |      On      |     On      |     On      |
   |---+-------------+--------------+-------------+-------------|
   |   |    290h     |     Off      |     On      |     On      |
   |---+-------------+--------------+-------------+-------------|
   |   |    2E0h     |      On      |     Off     |     On      |
   |---+-------------+--------------+-------------+-------------|
   |   |    2F0h     |     Off      |     Off     |     On      |
   |---+-------------+--------------+-------------+-------------|
   |>> |    300h     |      On      |     On      |     Off     |
   |---+-------------+--------------+-------------+-------------|
   |   |    350h     |     Off      |     On      |     Off     |
   |---+-------------+--------------+-------------+-------------|
   |   |    380h     |      On      |     Off     |     Off     |
   |---+-------------+--------------+-------------+-------------|
   |   |    3E0h     |     Off      |     Off     |     Off     |
   +------------------------------------------------------------+

   +------------------------------------------------------------+
   |                      JUMPER E6 ENABLE                      |
   |------------------------------------------------------------|
   |                 Setting                 |      SW1/5       |
   |-----------------------------------------+------------------|
   |>>             |         Enabled         |        On        |
   |---------------+-------------------------+------------------|
   |               |        Disabled         |       Off        |
   |------------------------------------------------------------|
   | Note:If this option is disabled (SW1/5 Off) the options    |
   | selected using E6 are disabled.                            |
   +------------------------------------------------------------+

   +------------------------------------------------------------+
   |  EXTENDED TRANSMIT TIMEOUT AND SIGNAL QUALITY ERROR (SQE)  |
   |                            TEST                            |
   |------------------------------------------------------------|
   |   Timeout    |    SQE     |   E6A    |   E6B    |   E6C    |
   |--------------+------------+----------+----------+----------|
   |   Enabled    |  Enabled   |  Closed  |   Open   |   Open   |
   |--------------+------------+----------+----------+----------|
   |   Disabled   |  Disabled  |   Open   |  Closed  |   Open   |
   |--------------+------------+----------+----------+----------|
   |   Enabled    |  Disabled  |   Open   |   Open   |  Closed  |
   |------------------------------------------------------------|
   | Note:SW1/5 must be set to on for these settings to be      |
   | valid.                                                     |
   |                                                            |
   | With extended transmit timeout enabled, if the card is     |
   | transmitting for an extented amount of time the            |
   | transmission will be interrupted and continued after a     |
   | preset time. This keeps the card from dominating the       |
   | network.                                                   |
   |                                                            |
   | Signal Quality Error (SQE) is a test of the collision      |
   | circuitry and path.                                        |
   |                                                            |
   | E6A, E6B, and E6C are located on the PIM module.           |
   +------------------------------------------------------------+

   +------------------------------------------------------------+
   |                    LINK INTEGRITY TEST                     |
   |------------------------------------------------------------|
   |               Setting               |        SW1/7         |
   |-------------------------------------+----------------------|
   |>>       |          Enabled          |          On          |
   |---------+---------------------------+----------------------|
   |         |         Disabled          |         Off          |
   |------------------------------------------------------------|
   | Note:E7 is located on the PIM module.                      |
   +------------------------------------------------------------+

   +------------------------------------------------------------+
   |                FACTORY CONFIGURED SETTINGS                 |
   |------------------------------------------------------------|
   |            Switch            |           Setting           |
   |------------------------------+-----------------------------|
   |            SW1/4             |             Off             |
   |------------------------------+-----------------------------|
   |            SW1/6             |             On              |
   |------------------------------+-----------------------------|
   |            SW1/8             |             Off             |
   +------------------------------------------------------------+

   +------------------------------------------------------------+
   |                     DIAGNOSTIC LED(S)                      |
   |------------------------------------------------------------|
   | LED  | Color | Status |             Condition              |
   |------+-------+--------+------------------------------------|
   | LED1 | Green |   On   |     Data is being transmitted      |
   |------+-------+--------+------------------------------------|
   | LED1 | Green |  Off   |   Data is not being transmitted    |
   |------+-------+--------+------------------------------------|
   | LED2 | Amber |   On   |       Data is being received       |
   |------+-------+--------+------------------------------------|
   | LED2 | Amber |  Off   |     Data is not being received     |
   |------+-------+--------+------------------------------------|
   | LED3 | Amber |   On   |     Network connection is good     |
   |------+-------+--------+------------------------------------|
   | LED3 | Amber |  Off   |    Network connection is broken    |
   |------+-------+--------+------------------------------------|
   | LED4 |  Red  |   On   |    Card is transmitting for an     |
   |      |       |        |           extended time            |
   |------+-------+--------+------------------------------------|
   | LED4 |  Red  |  Off   |          Normal operation          |
   |------+-------+--------+------------------------------------|
   | LED5 |  Red  |   On   |   Collision detected on network    |
   |------+-------+--------+------------------------------------|
   | LED5 |  Red  |  Off   |          Normal operation          |
   +------------------------------------------------------------+