CABLETRON SYSTEMS, INC. ======================= TRFOT-2, TRFOT-3 Device Type Fiber Optic Transceiver NIC Type Token Ring Maximum Onboard Memory Unidentified Boot ROM Not available Network Transfer Rate 4/16Mbps Topology Star Wiring Type Unshielded twisted pair (10Base-T) Fiber optic Data Bus External +------------------------------------------------------------+ | CONNECTIONS | |------------------------------------------------------------| | Function | Label | Function | Label | |---------------------+-------+----------------------+-------| | Power jack | CN1 | Fiber optic | RX | | | | connector (ST) - | | | | | receive | | |---------------------+-------+----------------------+-------| | AUI transceiver via | CN2 | Fiber optic | TX | | DB-9 | | connector (ST) - | | | | | transmit | | +------------------------------------------------------------+ +------------------------------------------------------------+ | USER CONFIGURABLE SETTINGS | |------------------------------------------------------------| | Function | Label | Position | |-----------------------------------------+-------+----------| | Phantom drive disabled | SW1/C | On | |-----------------------------------------+-------+----------| | Phantom drive enabled | SW1/C | Off | |-----------------------------------------+-------+----------| | Cabletron proprietary devices | SW1/D | On | |-----------------------------------------+-------+----------| | 802.5J compatible devices | SW1/D | Off | |------------------------------------------------------------| | Note: SW1/C & SW1/D apply to RI/RO applications | +------------------------------------------------------------+ +------------------------------------------------------------+ | APPLICATION SETTINGS | |------------------------------------------------------------| | Setting | SW1/A | SW1/B | SW1/C | SW1/D | |----------------------------+-------+-------+-------+-------| | Station application | On | Off | Off | Off | | enabled | | | | | |----------------------------+-------+-------+-------+-------| | Lobe (TCU) application | Off | Off | Off | Off | | enabled | | | | | |----------------------------+-------+-------+-------+-------| | Ring in application | On | On | See | See | | enabled | | | note | note | |----------------------------+-------+-------+-------+-------| | Ring out application | Off | On | See | See | | enabled | | | note | note | |------------------------------------------------------------| | Note: SW1/C & SW1/D may be in either position as | | illustrated in the user configuration table | +------------------------------------------------------------+ +------------------------------------------------------------+ | DIAGNOSTIC LED(S) | |------------------------------------------------------------| | LED | Color | Status | Condition | |-----+-------+----------+-----------------------------------| | PWR | Green | On | Power is on | |-----+-------+----------+-----------------------------------| | PWR | Green | Off | Power is off | |-----+-------+----------+-----------------------------------| | CU | Green | On | Phantom detected/valid copper | | | | | link | |-----+-------+----------+-----------------------------------| | CU | Green | Blinking | Phantom detected/valid copper | | | | | link, no data present | |-----+-------+----------+-----------------------------------| | CU | Red | On | Phantom not detected. No copper | | | | | link | |-----+-------+----------+-----------------------------------| | FO | Green | On | Fiber optic link is good | |-----+-------+----------+-----------------------------------| | FO | Red | On | Fiber optic link is broken | +------------------------------------------------------------+