COMPU-SHACK PRODUCTION, GMBH
============================

   CS-FDDI ISA-MMF-SAS

   Card Type              Network Interface Card                  
   NIC Type               FDDI                                    
   Maximum Onboard Memory Unidentified                            
   Boot ROM               Available                               
   Network Transfer Rate  100Mbps                                 
   Topology               Ring                                    
   Wiring Type            Fiber optic cable                       
   Data Bus               16-bit ISA                              

<gopher://bitreich.org/I/th99/n/C-D/41532-1.png>
   

   +------------------------------------------------------------+
   |                        CONNECTIONS                         |
   |------------------------------------------------------------|
   |           Function            |           Label            |
   |-------------------------------+----------------------------|
   | Fiber-optic connector via MIC |            CN1             |
   +------------------------------------------------------------+

   +------------------------------------------------------------+
   |                 USER CONFIGURABLE SETTINGS                 |
   |------------------------------------------------------------|
   |            Function             |   Label   |   Position   |
   |---------------------------------+-----------+--------------|
   |>> | Boot ROM disabled           |  JP13/A   |     Open     |
   |---+-----------------------------+-----------+--------------|
   |   | Boot ROM enabled            |  JP13/A   |    Closed    |
   |---+-----------------------------+-----------+--------------|
   |>> | Factory configured - do not |  JP13/E   | Unidentified |
   |   | alter                       |           |              |
   |---+-----------------------------+-----------+--------------|
   |>> | Factory configured - do not | JP21/pins | Unidentified |
   |   | alter                       |   1 & 2   |              |
   |---+-----------------------------+-----------+--------------|
   |   | Hard configuration mode     | JP21/pins |     Open     |
   |   | selected                    |   3 & 4   |              |
   |---+-----------------------------+-----------+--------------|
   |   | Soft configuration mode     | JP21/pins |    Closed    |
   |   | selected                    |   3 & 4   |              |
   +------------------------------------------------------------+

   +------------------------------------------------------------+
   |                 BASE I/O ADDRESS SELECTION                 |
   |------------------------------------------------------------|
   |      Address      |   JP13/B    |   JP13/C    |   JP13/D   |
   |-------------------+-------------+-------------+------------|
   |   |   200h-21Fh   |   Closed    |   Closed    |   Closed   |
   |---+---------------+-------------+-------------+------------|
   |   |   220h-23Fh   |   Closed    |   Closed    |    Open    |
   |---+---------------+-------------+-------------+------------|
   |   |   240h-25Fh   |   Closed    |    Open     |   Closed   |
   |---+---------------+-------------+-------------+------------|
   |   |   280h-29Fh   |   Closed    |    Open     |    Open    |
   |---+---------------+-------------+-------------+------------|
   |>> |   300h-31Fh   |    Open     |   Closed    |   Closed   |
   |---+---------------+-------------+-------------+------------|
   |   |   320h-33Fh   |    Open     |   Closed    |    Open    |
   |---+---------------+-------------+-------------+------------|
   |   |   340h-35Fh   |    Open     |    Open     |   Closed   |
   +------------------------------------------------------------+

+--------------------------------------------------------------------------+
|                           INTERRUPT SELECTION                            |
|--------------------------------------------------------------------------|
|IRQ |JP2/A |JP2/B |JP2/C |JP2/D |JP2/E |JP2/F |JP2/G |JP2/H |JP2/I |JP2/J |
|----+------+------+------+------+------+------+------+------+------+------|
| |3 | Open | Open | Open | Open | Open | Open | Open | Open | Open |Closed|
|-+--+------+------+------+------+------+------+------+------+------+------|
| |4 | Open | Open | Open | Open | Open | Open | Open | Open |Closed| Open |
|-+--+------+------+------+------+------+------+------+------+------+------|
|>>|5 | Open | Open | Open | Open | Open | Open | Open |Closed| Open | Open |
|-+--+------+------+------+------+------+------+------+------+------+------|
| |7 | Open | Open | Open | Open | Open | Open |Closed| Open | Open | Open |
|-+--+------+------+------+------+------+------+------+------+------+------|
| |9 | Open | Open | Open | Open | Open |Closed| Open | Open | Open | Open |
|-+--+------+------+------+------+------+------+------+------+------+------|
| |10| Open | Open | Open | Open |Closed| Open | Open | Open | Open | Open |
|-+--+------+------+------+------+------+------+------+------+------+------|
| |11| Open | Open | Open |Closed| Open | Open | Open | Open | Open | Open |
|-+--+------+------+------+------+------+------+------+------+------+------|
| |12| Open | Open |Closed| Open | Open | Open | Open | Open | Open | Open |
|-+--+------+------+------+------+------+------+------+------+------+------|
| |14| Open |Closed| Open | Open | Open | Open | Open | Open | Open | Open |
|-+--+------+------+------+------+------+------+------+------+------+------|
| |15|Closed| Open | Open | Open | Open | Open | Open | Open | Open | Open |
+--------------------------------------------------------------------------+

   +------------------------------------------------------------+
   |                     DIAGNOSTIC LED(S)                      |
   |------------------------------------------------------------|
   | LED  |    Color     | Status |          Condition          |
   |------+--------------+--------+-----------------------------|
   | LED1 | Unidentified |   On   |   See conditions in note    |
   |      |              |        |            below            |
   |------+--------------+--------+-----------------------------|
   | LED1 | Unidentified |  Off   |   See conditions in note    |
   |      |              |        |            below            |
   |------+--------------+--------+-----------------------------|
   | LED2 |     Red      |   On   |   Cable fault (SDDI only)   |
   |------+--------------+--------+-----------------------------|
   | LED2 |     Red      |  Off   |        Cable active         |
   |------+--------------+--------+-----------------------------|
   | LED3 |    Yellow    |   On   |        Data is being        |
   |      |              |        |    transmitted/received     |
   |------+--------------+--------+-----------------------------|
   | LED3 |    Yellow    |  Off   |      Data is not being      |
   |      |              |        |    transmitted/received     |
   |------+--------------+--------+-----------------------------|
   | LED4 |    Green     |   On   |   Ring connection is good   |
   |------+--------------+--------+-----------------------------|
   | LED4 |    Green     |  Off   |  Ring connection is broken  |
   +------------------------------------------------------------+

   +------------------------------------------------------------+
   |                       TECHNICAL NOTE                       |
   |------------------------------------------------------------|
   |      Note: When the board is operated in soft              |
   |      configuration mode, jumpers JP13 and JP2 must be      |
   |      open.                                                 |
   |                                                            |
   | JP21/pins 1 & 2 function to toggle I/O address selection.  |
   | If an I/O address collision is detected                    |
   |                                                            |
   | during installation, the shunt on JP21/pins 1 & 2 can be   |
   | changed (while the PC is running) to                       |
   |                                                            |
   | force the software to try the next larger I/O address. For |
   | example, if a collision is detected using                  |
   |                                                            |
   | I/O address 300h, removing shunt on JP21/pins 1 & 2 will   |
   | force the software to try I/O address                      |
   |                                                            |
   | 320h.                                                      |
   +------------------------------------------------------------+