ACCTON TCHNOLOGY CORPORATION
============================

   ETHERPAIR PCMCIA

   Card Type              Network Interface Card                  
   NIC Type               Ethernet                                
   Maximum Onboard Memory 16KB                                    
   Boot ROM               Unidentified                            
   Network Transfer Rate  10Mbps                                  
   Topology               Star                                    
   Wiring Type            Unshielded twisted pair                 
   Data Bus               PCMCIA                                  

<gopher://bitreich.org/I/th99/n/A-B/42088-1.png>
   

   +------------------------------------------------------------+
   |                        CONNECTIONS                         |
   |------------------------------------------------------------|
   |     Function     | Label  |       Function        | Label  |
   |------------------+--------+-----------------------+--------|
   | RJ-45 connector  |  CN1   | 15-pin flat connector |  CN2   |
   +------------------------------------------------------------+

   +------------------------------------------------------------+
   |                     DIAGNOSTIC LED(S)                      |
   |------------------------------------------------------------|
   |  LED   | Color  | Status |            Condition            |
   |--------+--------+--------+---------------------------------|
   | Tx/Rx  | Green  |   On   |          Data is being          |
   |        |        |        |      transmitted/received       |
   |--------+--------+--------+---------------------------------|
   | Tx/Rx  | Green  |  Off   |        Data is not being        |
   |        |        |        |      transmitted/received       |
   |--------+--------+--------+---------------------------------|
   |  LINK  | Green  |   On   |        UTP link is good         |
   |--------+--------+--------+---------------------------------|
   |  LINK  | Green  |  Off   |       UTP link is broken        |
   |------------------------------------------------------------|
   | Note: Exact locations of LEDs are unidentified.            |
   +------------------------------------------------------------+

   +------------------------------------------------------------+
   |               MISCELLANEOUS TECHNICAL NOTES                |
   |------------------------------------------------------------|
   | Note: The ferrite bead should be clamped over the module   |
   | cable as close as possible to 15-pin flat connector.       |
   +------------------------------------------------------------+