AST RESEARCH, INC.
==================

   AST ETHERNODE (202246-001)

   Transfer Rate    10Mbps                                        
   Data Bus         8-bit ISA                                     
   Topology         Linear bus                                    
   Wiring Type      RG-58A/U 50ohm coaxial                        
                                                                  
                    AUI transceiver via DB-15 port                
   Boot ROM         Not available                                 

<gopher://bitreich.org/I/th99/n/A-B/40395-1.png>
   

   +------------------------------------------------------------+
   |                         SLEEP MODE                         |
   |------------------------------------------------------------|
   |                Setting                |         E2         |
   |---------------------------------------+--------------------|
   |>>              |       Disabled       |       Closed       |
   |----------------+----------------------+--------------------|
   |                |       Enabled        |        Open        |
   |------------------------------------------------------------|
   | Note: When sleep mode is enabled the card is disabled. The |
   | card cannot be accessed by the computer or the network.    |
   | This option is provided to simplify trouble shooting       |
   | system conflicts.                                          |
   +------------------------------------------------------------+

   +------------------------------------------------------------+
   |                         CABLE TYPE                         |
   |------------------------------------------------------------|
   |              Type              |     E3      |     E4      |
   |--------------------------------+-------------+-------------|
   |>>       |    RG-58A/U 50ohm    |    Open     |   Closed    |
   |         |       coaxial        |             |             |
   |---------+----------------------+-------------+-------------|
   |         | AUI transceiver via  |   Closed    |    Open     |
   |         |      DB-15 port      |             |             |
   |------------------------------------------------------------|
   |   Note:E3 and E4 are not jumpers, they are receptacles for |
   |   a terminating resistor. In this case open means that the |
   |   resistor is not installed while closed would mean that   |
   |   the resistor is installed.                               |
   +------------------------------------------------------------+

   +------------------------------------------------------------+
   |                          CARD ID                           |
   |------------------------------------------------------------|
   |   Setting    |     E5     |    E6    |    E7    |    E8    |
   |--------------+------------+----------+----------+----------|
   |>>      |  A  |   Closed   |   Open   |   Open   |   Open   |
   |--------+-----+------------+----------+----------+----------|
   |        |  B  |    Open    |  Closed  |   Open   |   Open   |
   |--------+-----+------------+----------+----------+----------|
   |        |  C  |    Open    |   Open   |  Closed  |   Open   |
   |--------+-----+------------+----------+----------+----------|
   |        |  D  |    Open    |   Open   |   Open   |  Closed  |
   |------------------------------------------------------------|
   | Note: Up to four cards can be installed at once into the   |
   | same system. If more than one card is installed in the     |
   | system, each must have a distinct ID.                      |
   +------------------------------------------------------------+

   +------------------------------------------------------------+
   |                FACTORY CONFIGURED SETTINGS                 |
   |------------------------------------------------------------|
   |            Jumper            |           Setting           |
   |------------------------------+-----------------------------|
   |              E1              |           Closed            |
   +------------------------------------------------------------+

   +------------------------------------------------------------+
   |                    MISCELLANEOUS NOTES                     |
   |------------------------------------------------------------|
   | To completely configure this card, the software that comes |
   | with it must be used..                                     |
   +------------------------------------------------------------+