UNIDENTIFIED
============

   80386 MOTHERBOARD (VER. 3.2)

   Processor              80386DX                                 
   Processor Speed        16/20/25/30MHz                          
   Chip Set               C & T                                   
   Video Chip Set         None                                    
   Maximum Onboard Memory 16MB (8MB on external memory card)      
   Maximum Video Memory   None                                    
   Cache                  Unidentified                            
   BIOS                   AMI/Award/Phoenix                       
   Dimensions             327mm x 218mm                           
   I/O Options            External memory card, cache connector   
   NPU Options            80287/80387DX                           

<gopher://bitreich.org/I/th99/m/U-Z/33629-1.png>
   

   +------------------------------------------------------------+
   |                        CONNECTIONS                         |
   |------------------------------------------------------------|
   | Purpose          | Location | Purpose           | Location |
   |------------------+----------+-------------------+----------|
   | External battery |   JP3    | Turbo LED         |   JP7    |
   |------------------+----------+-------------------+----------|
   | Turbo switch     |   JP4    | Cache memory      |   JP11   |
   |                  |          | connector         |          |
   |------------------+----------+-------------------+----------|
   | Power LED &      |   JP5    | Reset switch      |   JP12   |
   | keylock          |          |                   |          |
   |------------------+----------+-------------------+----------|
   | Speaker          |   JP6    | External memory   |   SL1    |
   |                  |          | card              |          |
   +------------------------------------------------------------+

   +------------------------------------------------------------+
   |                 USER CONFIGURABLE SETTINGS                 |
   |------------------------------------------------------------|
   |               Function                | Label |  Position  |
   |---------------------------------------+-------+------------|
   |>> | 8042 controller uses 23 pin       |  JP1  | Pins 1 & 2 |
   |   | control                           |       |   closed   |
   |---+-----------------------------------+-------+------------|
   |   | Circuit speed select by pressing  |  JP1  | Pins 2 & 3 |
   |   | CTRL, ALT + or -                  |       |   closed   |
   |---+-----------------------------------+-------+------------|
   |   | Monitor type select color/EGA/VGA |  JP2  | Pins 1 & 2 |
   |   |                                   |       |   closed   |
   |---+-----------------------------------+-------+------------|
   |   | Monitor type select monochrome    |  JP2  | Pins 2 & 3 |
   |   |                                   |       |   closed   |
   |---+-----------------------------------+-------+------------|
   |   | Battery type select external      |  JP3  |   Closed   |
   |---+-----------------------------------+-------+------------|
   |   | On board battery enabled          |  JP3  | Pins 1 & 2 |
   |   |                                   |       |   closed   |
   |---+-----------------------------------+-------+------------|
   |   | On board battery disabled         |  JP3  |    Open    |
   |---+-----------------------------------+-------+------------|
   |   | CMOS memory clear                 |  JP3  | Pins 3 & 4 |
   |   |                                   |       |   closed   |
   |---+-----------------------------------+-------+------------|
   |>> | Factory configured - do not alter |  JP8  |   Closed   |
   +------------------------------------------------------------+

   +------------------------------------------------------------+
   |                    CACHE CONFIGURATION                     |
   |------------------------------------------------------------|
   | Note: The size of the cache module is unidentified.        |
   +------------------------------------------------------------+

   +------------------------------------------------------------+
   |                       NPU SELECTION                        |
   |------------------------------------------------------------|
   |        Type        |        JP9         |       JP10       |
   |--------------------+--------------------+------------------|
   |   None installed   | Pins 1 & 2 closed  |       Open       |
   |--------------------+--------------------+------------------|
   |       80287        | Pins 1 & 2 closed  |       Open       |
   |--------------------+--------------------+------------------|
   |       80387        | Pins 2 & 3 closed  |      Closed      |
   +------------------------------------------------------------+

<gopher://bitreich.org/I/th99/m/U-Z/33629-2.png>
                                                         

   +------------------------------------------------------------+
   |                     DRAM CONFIGURATION                     |
   |------------------------------------------------------------|
   |   Size   |   Bank 0   |   Bank 1   |  Bank 2   |  Bank 3   |
   |----------+------------+------------+-----------+-----------|
   |   2MB    |    1MB     |    1MB     |   None    |   None    |
   |----------+------------+------------+-----------+-----------|
   |   2MB    |    None    |    None    |    1MB    |    1MB    |
   |----------+------------+------------+-----------+-----------|
   |   8MB    |    None    |    None    |    4MB    |    4MB    |
   |----------+------------+------------+-----------+-----------|
   |   8MB    |    4MB     |    4MB     |   None    |   None    |
   |----------+------------+------------+-----------+-----------|
   |   16MB   |    4MB     |    4MB     |    4MB    |    4MB    |
   |------------------------------------------------------------|
   |      Note: The location of the banks are unidentified. The |
   |      size of the chips are unidentified on the main board  |
   |      and memory card. Banks 1 & 2 are located on the main  |
   |      board. Banks 2 & 3 are located on the external memory |
   |      card.                                                 |
   +------------------------------------------------------------+

   +------------------------------------------------------------+
   |                 DRAM JUMPER CONFIGURATION                  |
   |------------------------------------------------------------|
   |        Setting         |       J1        |       J2        |
   |------------------------+-----------------+-----------------|
   | No memory installed in | Pins 1 & 2, 4 & | Pins 1 & 2, 4 & |
   |       main board       |    5 closed     |    5 closed     |
   |------------------------+-----------------+-----------------|
   |  Memory installed on   | Pins 2 & 3, 5 & | Pins 2 & 3, 5 & |
   |       main board       |    6 closed     |    6 closed     |
   |------------------------------------------------------------|
   | Note: Either 2MB or 8MB will be installed on the memory    |
   | card.                                                      |
   +------------------------------------------------------------+