PACKARD BELL ============ 386-33 Processor 80386DX Processor 33MHz Speed Chip Set Intel Max. Onboard 8MB DRAM SRAM Cache None BIOS Phoenix Dimensions 355mm x 304mm I/O Options 32-bit expansion slots (2), parallel port, serial ports (2) NPU Options 80387DX +------------------------------------------------------------+ | CONNECTIONS | |------------------------------------------------------------| | Purpose | Location | Purpose | Location | |------------------+-----------+-----------------+-----------| | Parallel port | J13A | Reset switch | J23B | |------------------+-----------+-----------------+-----------| | Serial port 1 (9 | J13B/pins | Speaker | J23C | | pin) | 1-10 | | | |------------------+-----------+-----------------+-----------| | Serial port 2 (9 | J13B/pins | Power LED & | J23D | | pin) | 11-20 | keylock | | |------------------+-----------+-----------------+-----------| | Serial port 2 | J13C | 32-bit | S1 & S2 | | (25 pin) | | expansion slots | | |------------------+-----------+-----------------+-----------| | Reserved for | J23A | | | | future use | | | | |------------------------------------------------------------| | Note:J13C is a 25 pin version of serial port 2 (J13B | | pins 11-20). Either connector may be used, but not | | both. | +------------------------------------------------------------+ +------------------------------------------------------------+ | USER CONFIGURABLE SETTINGS | |------------------------------------------------------------| | Function | Jumper | Position | |--------------------------------------+--------+------------| |>> | Monitor type select color | JP5 | pins 2 & 3 | | | | | closed | |---+----------------------------------+--------+------------| | | Monitor type select monochrome | JP5 | pins 1 & 2 | | | | | closed | |---+----------------------------------+--------+------------| |>> | Keyboard reset disabled | JP6 | pins 2 & 3 | | | | | closed | |---+----------------------------------+--------+------------| | | Keyboard reset enabled | JP6 | pins 1 & 2 | | | | | closed | |---+----------------------------------+--------+------------| |>> | NPU disabled | JP7 | pins 2 & 3 | | | | | closed | |---+----------------------------------+--------+------------| | | NPU enabled | JP7 | pins 1 & 2 | | | | | closed | |---+----------------------------------+--------+------------| |>> | Printer acknowledge trailing | JP8 | pins 2 & 3 | | | edge | | closed | |---+----------------------------------+--------+------------| | | Printer acknowledge leading edge | JP8 | pins 1 & 2 | | | | | closed | |---+----------------------------------+--------+------------| |>> | BIOS type select 2764 | JP9 | pins 1 & 2 | | | | | closed | |---+----------------------------------+--------+------------| | | BIOS type select 27128 | JP9 | pins 2 & 3 | | | | | closed | |---+----------------------------------+--------+------------| |>> | Factory configured - do not | JP16 | Open | | | alter | | | +------------------------------------------------------------+ +------------------------------------------------------------+ | SERIAL PORT 1 (J13B/PINS 1-10) CONFIGURATION | |------------------------------------------------------------| | Mode | JP3 | |-------------------------------+----------------------------| |>> | Enabled (COM1) | pins 1 & 2 closed | |-----+-------------------------+----------------------------| | | Disabled | pins 2 & 3 closed | +------------------------------------------------------------+ +------------------------------------------------------------+ | SERIAL PORT 2 (J13B/PINS 11-20 OR J13C) CONFIGURATION | |------------------------------------------------------------| | Mode | JP4 | |---------------------------------+--------------------------| |>> | Enabled (COM2) | pins 1 & 2 closed | |--------+------------------------+--------------------------| | | Disabled | pins 2 & 3 closed | +------------------------------------------------------------+ +------------------------------------------------------------+ | PARALLEL PORT (J13A) CONFIGURATION | |------------------------------------------------------------| | LPT | JP1 | JP2 | |------------------+--------------------+--------------------| |>> | LPT1 | pins 1 & 2 closed | pins 2 & 3 closed | |---+--------------+--------------------+--------------------| | | LPT2 | pins 2 & 3 closed | pins 1 & 2 closed | |---+--------------+--------------------+--------------------| | | Disabled | pins 2 & 3 closed | pins 2 & 3 closed | +------------------------------------------------------------+ +------------------------------------------------------------+ | DRAM CONFIGURATION | |------------------------------------------------------------| | Size | Bank 0 | Bank 1 | JP11 | JP12 | JP14 | JP15 | |------+--------+--------+--------+--------+--------+--------| | 1MB | (4) | NONE | Open | Open | pins 1 | pins 1 | | | 256K x | | | | & 2 | & 2 | | | 9 | | | | | | |------+--------+--------+--------+--------+--------+--------| | 2MB | (4) | (4) | Closed | Open | pins 1 | pins 1 | | | 256K x | 256K x | | | & 2 | & 2 | | | 9 | 9 | | | | | |------+--------+--------+--------+--------+--------+--------| | 4MB | (4) 1M | NONE | Open | Closed | pins 2 | pins 2 | | | x 9 | | | | & 3 | & 3 | |------+--------+--------+--------+--------+--------+--------| | 8MB | (4) 1M | (4) 1M | Closed | Closed | pins 2 | pins 2 | | | x 9 | x 9 | | | & 3 | & 3 | |------------------------------------------------------------| | Note:Pins designated should be in the closed position. | +------------------------------------------------------------+ +------------------------------------------------------------+ | RAM TYPE CONFIGURATION | |------------------------------------------------------------| | Type | JP10 | JP13 | |------------------------+-----------------+-----------------| | | RAS/CAS | Open | Open | |---+--------------------+-----------------+-----------------| |>> | Fast Paged | Closed | Closed | |---+--------------------+-----------------+-----------------| | | Static Column | Open | Closed | +------------------------------------------------------------+