AMPTRON INTERNATIONAL, INC. =========================== DX-6600 Processor 80486SX/AM486SX/Cx486S/80487SX/AM486DX 80486DX/Cx486DX/AM486DX2/80486DX2 Processor Speed 25/33/40/50(internal/50/66(internal)MHz Chip Set SARC Max. Onboard DRAM 64MB Cache 64/128/256KB BIOS AMI Dimensions 330mm x 218mm I/O Options 32-bit VESA local bus slots (3) NPU Options 80387DX +------------------------------------------------------------+ | CONNECTIONS | |------------------------------------------------------------| | Purpose | Location | Purpose | Location | |-------------+----------+------------------+----------------| | Power LED & | JP10 | Reset switch | JP13 | | keylock | | | | |-------------+----------+------------------+----------------| | Speaker | JP11 | Turbo switch | JP14 | |-------------+----------+------------------+----------------| | Turbo LED | JP12 | 32-bit VESA | SL1, SL2,& SL3 | | | | local bus slots | | +------------------------------------------------------------+ +------------------------------------------------------------+ | USER CONFIGURABLE SETTINGS | |------------------------------------------------------------| | Function | Jumper | Position | |--------------------------------------+--------+------------| | | CPU clock rate < 33 MHz | JP15 | Open | |---+----------------------------------+--------+------------| | | CPU clock rate > 33 MHz | JP15 | pins 1 & 2 | | | | | closed | |---+----------------------------------+--------+------------| |>> | CMOS memory normal | JP1 | Open | | | operation(External Battery) | | | |---+----------------------------------+--------+------------| | | CMOS memory normal | JP1 | pins 2 & 3 | | | operation(Rechargeable Battery) | | closed | |---+----------------------------------+--------+------------| | | CMOS memory clear | JP1 | pins 3 & 4 | | | | | closed | +------------------------------------------------------------+ +------------------------------------------------------------+ | DRAM CONFIGURATION | |------------------------------------------------------------| | Size | Bank 0 | Bank 1 | |------------------+--------------------+--------------------| | 1MB | (4) 256K x 9 | NONE | |------------------+--------------------+--------------------| | 2MB | (4) 256K x 9 | (4) 256K x 9 | |------------------+--------------------+--------------------| | 4MB | (4) 1M x 9 | NONE | |------------------+--------------------+--------------------| | 5MB | (4) 1M x 9 | (4) 256K x 9 | |------------------+--------------------+--------------------| | 8MB | (4) 1M x 9 | (4) 1M x 9 | |------------------+--------------------+--------------------| | 16MB | (4) 4M x 9 | NONE | |------------------+--------------------+--------------------| | 20MB | (4) 4M x 9 | (4) 1M x 9 | |------------------+--------------------+--------------------| | 32MB | (4) 4M x 9 | (4) 4M x 9 | |------------------+--------------------+--------------------| | 64MB | (4) 16M x 9 | NONE | +------------------------------------------------------------+ +------------------------------------------------------------+ | CACHE CONFIGURATION | |------------------------------------------------------------| | Size | Bank 0 | Bank 1 | TAG | |------------+---------------+---------------+---------------| | 64KB | (4) 8K x 8 | (4) 8K x 8 | (1) 8K x 8 | |------------+---------------+---------------+---------------| | 128KB | (4) 32K x 8 | NONE | (1) 8K x 8 | |------------+---------------+---------------+---------------| | 256KB | (4) 32K x 8 | (4) 32K x 8 | (1) 32K x 8 | +------------------------------------------------------------+ +------------------------------------------------------------+ | CACHE JUMPER CONFIGURATION | |------------------------------------------------------------| | Size | JP2 | JP4 | JP5 | JP6 | |-------+--------+--------+-----------------+----------------| | 64KB | Open | Open | pins 1 & 2 | Open | | | | | closed | | |-------+--------+--------+-----------------+----------------| | 128KB | Open | Closed | pins 2 & 3 | pins 2 & 3 | | | | | closed | closed | |-------+--------+--------+-----------------+----------------| | 256KB | Closed | Closed | pins 1 & 2 | pins 1 & 2 | | | | | closed | closed | +------------------------------------------------------------+ +------------------------------------------------------------+ | CPU TYPE CONFIGURATION | |------------------------------------------------------------| | CPU Type | JP16 | JP17 | |------------+--------------------------+--------------------| | 80486SX | pins 2 & 3 closed | Open | |------------+--------------------------+--------------------| | Cx486S | pins 1 & 2, 3 & 4 closed | pins 1 & 2 closed | |------------+--------------------------+--------------------| | 80487SX | pins 1 & 2, 3 & 4 closed | pins 2 & 3 closed | |------------+--------------------------+--------------------| | 80486DX | pins 1 & 2, 3 & 4 closed | pins 1 & 2 closed | |------------+--------------------------+--------------------| | Cx486DX | pins 1 & 2, 3 & 4 closed | pins 1 & 2 closed | |------------+--------------------------+--------------------| | 80486DX2 | pins 1 & 2, 3 & 4 closed | pins 1 & 2 closed | +------------------------------------------------------------+ +------------------------------------------------------------+ | CPU SPEED CONFIGURATION | |------------------------------------------------------------| | CPU speed | JP7 | JP8 | JP18 | |-----------+----------------+---------------+---------------| | 25MHz | pins 2 & 3 | pins 1 & 2 | pins 1 & 2 | | | closed | closed | closed | |-----------+----------------+---------------+---------------| | 33MHz | pins 1 & 2 | pins 2 & 3 | pins 1 & 2 | | | closed | closed | closed | |-----------+----------------+---------------+---------------| | 40MHz | pins 2 & 3 | pins 2 & 3 | pins 1 & 2 | | | closed | closed | closed | |-----------+----------------+---------------+---------------| | 50MHz | pins 2 & 3 | pins 1 & 2 | pins 2 & 3 | | | closed | closed | closed | |-----------+----------------+---------------+---------------| | 50iMHz | pins 2 & 3 | pins 1 & 2 | pins 1 & 2 | | | closed | closed | closed | |-----------+----------------+---------------+---------------| | 66iMHz | pins 1 & 2 | pins 2 & 3 | pins 1 & 2 | | | closed | closed | closed | +------------------------------------------------------------+ +------------------------------------------------------------+ | CPU SPEED CONFIGURATION (AMD486 CPU ONLY) | |------------------------------------------------------------| | | Adaptor Board | System Board | | |------------+----------------+-----------------+------------| | CPU speed | JP1 | JP2 | JP18 | |------------+----------------+-----------------+------------| | 25MHz | pins 1 & 2 | pins 1 & 2, 3 & | pins 2 & 3 | | | | 4 | | |------------+----------------+-----------------+------------| | 33MHz | pins 2 & 3 | pins 1 & 2, 3 & | pins 2 & 3 | | | | 4 | | |------------+----------------+-----------------+------------| | Cx 40MHz | pins 2 & 3 | pins 3 & 4 | pins 1 & 2 | |------------+----------------+-----------------+------------| | 40MHz | pins 1 & 2 | pins 2 & 3 | pins 1 & 2 | |------------+----------------+-----------------+------------| | 50MHz | pins 1 & 2 | pins 3 & 4 | pins 2 & 3 | |------------+----------------+-----------------+------------| | 50iMHz | pins 1 & 2 | pins 1 & 2, 3 & | pins 2 & 3 | | | | 4 | | |------------+----------------+-----------------+------------| | 66iMHz | pins 2 & 3 | pins 1 & 2, 3 & | pins 2 & 3 | | | | 4 | | |------------------------------------------------------------| | Note:Pins designated are in the closed position. | |------------------------------------------------------------| | When this system board is installed with a AMD486 CPU, a | | DX-6600 clock generator adaptor board is required. A | | system board that has this adaptor board installed must | | follow the above configuration table. System boards | | without this adapter board are to be configured according | | to the user manual. | | | | To install the DX-6600 clock generator adaptor board, | | remove the original clock chip from location "Y1" (between | | the 387DX socket and the inner most VL-bus slot). Remove | | the jumper caps from JP7 and JP8. Use a wire cutter to cut | | all the pins from JP7. Orient the cut-off at the socket | | under the adapter with the cut-off at the socket on the | | system board location "Y1" in such a way that the jumper | | JP1 & JP2 on the adapter board are on top of the original | | jumper JP7 on the system board. Insert the adapter board | | firmly into the 8-pin system board socket and follow the | | jumper settings above to configure your system. | | | | If you have any problems installing the DX-6600 or | | configuring your system, please contact the manufacturer | | for assisstance. | +------------------------------------------------------------+