UNIDENTIFIED
============

   MT-201A

   Card Type       Multi I/O card                                 
   Chip Set        Goldstar                                       
   Maximum Onboard Unidentified                                   
   Memory          
   I/O Options     Parallel printer port, serial ports (2), game  
                   port, floppy drive interface                   
   Floppy drives   Unidentified                                   
   supported       
   Data Bus        8-bit ISA                                      

<gopher://bitreich.org/I/th99/i/U-Z/54495-1.png>
   

   +------------------------------------------------------------+
   |                        CONNECTIONS                         |
   |------------------------------------------------------------|
   |         Function         | Label |    Function     | Label |
   |--------------------------+-------+-----------------+-------|
   | Parallel port            |  CN1  | Serial port 1   | ASYN1 |
   |--------------------------+-------+-----------------+-------|
   | 9 pin digital video port |  CN2  | Serial port 2   | ASYN2 |
   |--------------------------+-------+-----------------+-------|
   | Floppy drive interface   |  CN3  |                 |       |
   +------------------------------------------------------------+

   +------------------------------------------------------------+
   |                 USER CONFIGURABLE SETTINGS                 |
   |------------------------------------------------------------|
   |             Function              | Label |    Position    |
   |-----------------------------------+-------+----------------|
   | Game port enabled                 |  JP5  |     Closed     |
   |-----------------------------------+-------+----------------|
   | Game port disabled                |  JP5  |      Open      |
   +------------------------------------------------------------+

   +------------------------------------------------------------+
   |              PARALLEL PORT ADDRESS SELECTION               |
   |------------------------------------------------------------|
   |      Setting      |    Label    |         Position         |
   |-------------------+-------------+--------------------------|
   | LPT1 (378h)       |     JP4     | Pins 1 & 2, 3 & 4 closed |
   |-------------------+-------------+--------------------------|
   | LPT2 (278h)       |     JP4     | Pins 3 & 4, 7 & 8 closed |
   +------------------------------------------------------------+

   +------------------------------------------------------------+
   |              SERIAL PORT 1 ADDRESS SELECTION               |
   |------------------------------------------------------------|
   |      Setting       |  Label   |          Position          |
   |--------------------+----------+----------------------------|
   | COM1 (3F8h)        |   JP6    | Pins 1 & 2, 13 & 14 closed |
   |--------------------+----------+----------------------------|
   | COM2 (3F8h)        |   JP6    | Pins 5 & 6, 11 & 12 closed |
   |--------------------+----------+----------------------------|
   | COM3 (3F8h)        |   JP6    | Pins 3 & 4, 13 & 14 closed |
   |--------------------+----------+----------------------------|
   | COM4 (3F8h)        |   JP6    | Pins 7 & 8, 11 & 12 closed |
   +------------------------------------------------------------+

   +------------------------------------------------------------+
   |               MISCELLANEOUS TECHNICAL NOTES                |
   |------------------------------------------------------------|
   | Note: To enable port 2, IC's 8250B, 75188, and 75189 must  |
   | be installed. If JP6 is a 20-pin connector, then Pins 15 & |
   | 16, 19 & 20 closed activate COM2 and Pins 15 & 16, 17 & 19 |
   | closed activate COM4.                                      |
   +------------------------------------------------------------+