PATTON ELECTRONICS COMPANY ========================== 2070/CX Card Type Interface Converter Chip Set Unidentified I/O Options V.35 DCE port, RJ-45 twisted pair interface, power Maximum Data Rate 64Kbps Data Bus External +------------------------------------------------------------+ | CONNECTIONS | |------------------------------------------------------------| | Function | Label | Function | Label | |-----------------------+-------+--------------------+-------| | V.35 DCE port (34-pin | CN1 | UTP interface | CN2 | | male connector) | | (RJ-45 connector) | | |-----------------------+-------+--------------------+-------| | Power | CN3 | | | +------------------------------------------------------------+ +------------------------------------------------------------+ | USER CONFIGURABLE SETTINGS | |------------------------------------------------------------| | Setting | Label | Position | |----------------------------------------+-------+-----------| |>> | Local line loopback and G.703 loop | S1/1 | Off | | | diagnostics disabled | | | |---+------------------------------------+-------+-----------| | | Local line loopback and G.703 loop | S1/1 | On | | | diagnostics enabled | | | |---+------------------------------------+-------+-----------| |>> | Ignores local loopback requests | S1/4 | On | |---+------------------------------------+-------+-----------| | | Enters local loopback mode when | S1/4 | Off | | | pin 18 is raised | | | |---+------------------------------------+-------+-----------| |>> | AC power enabled | JP1 | Pins 1 & | | | | | 3 closed | |---+------------------------------------+-------+-----------| | | Interface power enabled | JP1 | Pins 1 & | | | | | 2 closed | |---+------------------------------------+-------+-----------| |>> | Signal ground is connected to | JP1 | Pins 5 & | | | frame ground | | 6 closed | |---+------------------------------------+-------+-----------| | | Signal ground is disconnected from | JP1 | Pins 4 & | | | frame ground | | 6 closed | +------------------------------------------------------------+ +------------------------------------------------------------+ | CLOCK SOURCE | |------------------------------------------------------------| | Setting | S1/2 | S1/3 | |----------------------------------------------+------+------| |>> | Terminal timing supplied by network | On | Off | | | signal | | | |---+------------------------------------------+------+------| | | Terminal timing supplied by DTE device | On | Off | |---+------------------------------------------+------+------| | | Transmit clock generated internally | Off | On | +------------------------------------------------------------+ +------------------------------------------------------------+ | DIAGNOSTIC LED(S) | |------------------------------------------------------------| | LED | Color | Status | Condition | |------+-------+--------+------------------------------------| | SYNC | Green | On | Valid synchronization to the | | | | | terminal device exists | |------+-------+--------+------------------------------------| | SYNC | Green | Off | Synchronization has slipped, or | | | | | connection is broken | |------+-------+--------+------------------------------------| | TM | Red | On | Device is conducting a loopback | | | | | test | |------+-------+--------+------------------------------------| | TM | Red | Off | Device is not conducting a | | | | | loopback test | +------------------------------------------------------------+