CARRY COMPUTER ENGINEERING CO., LTD. ==================================== PCD-XX-211 Card Type PCMCIA slot controller Chip Set Unidentified Maximum Onboard Memory N/A I/O Options PCMCIA interface Data Bus 16-bit ISA Floppy drives supported None +------------------------------------------------------------+ | CONNECTIONS | |------------------------------------------------------------| | Function | Label | Function | Label | | | | |------------------+-------+-------------+-------+---+---+---| | 50-pin interface | CN1 | PCMCIA Slot | JP5 | | | | | connector to | | | | | | | | drive unit | | | | | | | |------------------+-------+-------------+-------+---+---+---| | 26-pin interface | CN2 | | | | | | | connector to | | | | | | | | drive unit | | | | | | | |------------------------------------------------+---+---+---| | Note: Both interface connectors are | | | | | proprietary and are used with PCMCIA drive | | | | | unit. | | | | +------------------------------------------------------------+ +------------------------------------------------------------+ | MULTI-CARD CONFIGURATION | |------------------------------------------------------------| | Setting | Controller | Drive | JP3 | JP4 | | | Slot # | Slot # | | | |----------------+------------+--------+----------+----------| | i Card is | 1 | 0 | Pins 2 & | Pins 2 & | | first in | | | 3 closed | 3 closed | | system | | | | | |----------------+------------+--------+----------+----------| | Card is second | 3 | 2 | Pins 2 & | Pins 1 & | | in system | | | 3 closed | 2 closed | |----------------+------------+--------+----------+----------| | Card is third | 5 | 4 | Pins 1 & | Pins 2 & | | in system | | | 2 closed | 3 closed | |----------------+------------+--------+----------+----------| | Card is fourth | 7 | 6 | Pins 1 & | Pins 1 & | | in system | | | 2 closed | 2 closed | +------------------------------------------------------------+ +------------------------------------------------------------+ | MISCELLANEOUS TECHNICAL NOTES | |------------------------------------------------------------| | Note : The PCD-XX-211 slot controller is a controller | | card for a PCMCIA drive which has one slot and mounts | | in a standard floppy bay. Multiple PCD-XX-211 | | controller cards may be installed in a system. JP3 & | | JP4 must be reset to designate a unique number for | | each controller and drive slot. | +------------------------------------------------------------+