AMERICAN DATA AQUISITION CORPORATION
====================================

   5801MF, 5802MF

   Card Type               Data Aquisition                        
   Chip Set                Unidentified                           
   Maximum Onboard Memory  Unidentified                           
   I/O Options             Analog input, digital input            
   Hard Drives supported   None                                   
   Floppy drives supported None                                   
   Data Bus                16-bit ISA                             
   Card Size               Full-length                            

<gopher://bitreich.org/I/th99/i/A-B/54195-1.png>
   

   +------------------------------------------------------------+
   |                        CONNECTIONS                         |
   |------------------------------------------------------------|
   |        Function         | Label |     Function     | Label |
   |-------------------------+-------+------------------+-------|
   | 40-pin header to 37-pin |  J1   | DAC1 bipolar     |  P5   |
   | analog/digital signals  |       | offset selector  |       |
   | connector via cable     |       |                  |       |
   |-------------------------+-------+------------------+-------|
   | 40-pin header to 37-pin |  J2   | DAC1 range       |  P6   |
   | analog/digital signals  |       | selector         |       |
   | connector via cable     |       |                  |       |
   |-------------------------+-------+------------------+-------|
   | 50-pin analog/digital   |  J8   | A/D converter    |  P7   |
   | signals connector       |       | unipolar offset  |       |
   |                         |       | selector         |       |
   |-------------------------+-------+------------------+-------|
   | DAC0 unipolar offset    |  P1   | A/D converter    |  P8   |
   | selector                |       | bipolar offset   |       |
   |                         |       | selector         |       |
   |-------------------------+-------+------------------+-------|
   | DAC0 bipolar offset     |  P2   | A/D converter    |  P9   |
   | selector                |       | unipolar range   |       |
   |                         |       | selector         |       |
   |-------------------------+-------+------------------+-------|
   | DACO range selector     |  P3   | A/D converter    |  P10  |
   |                         |       | bipolar range    |       |
   |                         |       | selector         |       |
   |-------------------------+-------+------------------+-------|
   | DAC1 unipolar offset    |  P4   | A/D converter    |  P11  |
   | selector                |       | zero selector    |       |
   +------------------------------------------------------------+

   +------------------------------------------------------------+
   |              ANALOG INPUT RANGE CONFIGURATION              |
   |------------------------------------------------------------|
   |    Polarity    |     Range     |     JP1     |     JP2     |
   |----------------+---------------+-------------+-------------|
   |>> |  Bipolar   | -10V to +10V  | Pins 1 & 2  | Pins 1 & 2  |
   |---+------------+---------------+-------------+-------------|
   |   |  Unipolar  |  0V to +10V   | Pins 2 & 3  | Pins 2 & 3  |
   +------------------------------------------------------------+

   +------------------------------------------------------------+
   |                 BASE I/O ADDRESS SELECTION                 |
   |------------------------------------------------------------|
   |   Setting   |  SW1/1  |  SW1/2  | SW1/3  | SW1/4  | SW1/5  |
   |-------------+---------+---------+--------+--------+--------|
   |    |  000h  |   Off   |   Off   |  Off   |  Off   |  Off   |
   |----+--------+---------+---------+--------+--------+--------|
   |    |  020h  |   Off   |   Off   |  Off   |  Off   |   On   |
   |----+--------+---------+---------+--------+--------+--------|
   |    |  040h  |   Off   |   Off   |  Off   |   On   |  Off   |
   |----+--------+---------+---------+--------+--------+--------|
   |    |  060h  |   Off   |   Off   |  Off   |   On   |   On   |
   |----+--------+---------+---------+--------+--------+--------|
   |    |  080h  |   Off   |   Off   |   On   |  Off   |  Off   |
   |----+--------+---------+---------+--------+--------+--------|
   |>>  |  120h  |   Off   |   On    |  Off   |  Off   |   On   |
   |----+--------+---------+---------+--------+--------+--------|
   |    |  360h  |   On    |   On    |  Off   |   On   |   On   |
   |----+--------+---------+---------+--------+--------+--------|
   |    |  380h  |   On    |   On    |   On   |  Off   |  Off   |
   |----+--------+---------+---------+--------+--------+--------|
   |    |  3A0h  |   On    |   On    |   On   |  Off   |   On   |
   |----+--------+---------+---------+--------+--------+--------|
   |    |  3C0h  |   On    |   On    |   On   |   On   |  Off   |
   |----+--------+---------+---------+--------+--------+--------|
   |    |  3E0h  |   On    |   On    |   On   |   On   |   On   |
   |------------------------------------------------------------|
   |                           Note:                            |
   |                                                            |
   | A total of 32 base address settings are available. The     |
   | switches are a binary representation of the decimal memory |
   | addresses. SW1/1 is the Most Significant Bit and jumper    |
   | SW1/5 is the Least Significant Bit. The jumpers have the   |
   | following decimal values: SW1/1=512, SW1/2=256, SW1/3=128, |
   | SW1/4=64, SW1/5=32. Turn off the switches and add the      |
   | values of the switches to obtain the correct memory        |
   | address. (On=1, 0ff=0)                                     |
   +------------------------------------------------------------+