ALLOY COMPUTER PRODUCTS, INC. ============================= IMP8 Card Type I/O controller Chip Set None Maximum Onboard Memory Unidentified I/O Options Terminal connector Data Bus 16-bit ISA Floppy drives supported None +------------------------------------------------------------+ | CONNECTIONS | |------------------------------------------------------------| | Function | Label | |------------------------------------+-----------------------| | 37-pin connector | CN1 | |------------------------------------------------------------| | Note: CN1 is used to connect the IMP8 & the Terminal | | Array Panel together for Alloy's NX386 operating | | system. The Terminal Array Panel contains eight | | terminal connectors (DB-9) & eight parallel/serial | | connectors (DB-25). | +------------------------------------------------------------+ +------------------------------------------------------------+ | USER CONFIGURABLE SETTINGS | |------------------------------------------------------------| | Function | Label | Position | |--------------------------------------+--------+------------| |>> | First IMP8 board installed | JP1 | Closed | |-----+--------------------------------+--------+------------| | | Second IMP8 board installed | JP1 | Open | |------------------------------------------------------------| | Note: Only remove the jumper from JP1 on the second board | | installed in any system. | +------------------------------------------------------------+ +------------------------------------------------------------+ | MISCELLANEOUS TECHNICAL NOTE | |------------------------------------------------------------| | Note: The exact type & amount of memory is | | unidentified. | +------------------------------------------------------------+