UNIDENTIFIED ============ IDE 827 +------------------------------------------------------------+ |------------------------------------------------------------| | Data bus: | 16-bit, ISA | |-------------------+----------------------------------------| | Size: | Half-length, full-height card | |-------------------+----------------------------------------| | Hard drive | Two IDE (AT) interface drives | | supported: | | |-------------------+----------------------------------------| | Floppy drives | Two 360KB, 720KB, 1.2MB, or 1.44MB | | supported: | drives | +------------------------------------------------------------+ +------------------------------------------------------------+ | CONNECTIONS | |------------------------------------------------------------| | Function | Location | |-----------------------------------------------+------------| | Game port | CN1 | |-----------------------------------------------+------------| | 40-pin IDE (AT) Interface connector | CN2 | |-----------------------------------------------+------------| | 34-pin control cable connector - floppy drive | CN3 | |-----------------------------------------------+------------| | 10-pin serial port 2 -internal | CN4 | |-----------------------------------------------+------------| | 9-pin serial port 1 - external | CN5 | |-----------------------------------------------+------------| | 25-pin parallel port | CN6 | |-----------------------------------------------+------------| | 4-pin connector - drive active LED | JP1 | +------------------------------------------------------------+ +------------------------------------------------------------+ | USER CONFIGURABLE SETTINGS | |------------------------------------------------------------| | Function | Location | Setting | |----------------------------------+----------+--------------| |>> | Game port enabled | JP3 | pins 1 & 2 | | | | | closed | |---+------------------------------+----------+--------------| | | Game port disabled | JP3 | pins 2 & 3 | | | | | closed | |---+------------------------------+----------+--------------| |>> | Floppy drive enabled | JP4 | pins 1 & 2 | | | | | closed | |---+------------------------------+----------+--------------| | | Floppy drive disabled | JP4 | pins 2 & 3 | | | | | closed | |---+------------------------------+----------+--------------| |>> | Parallel port is LPT1 (378h) | JP5 | pins 1 & 2 | | | | | closed | |---+------------------------------+----------+--------------| | | Parallel port is LPT2 (278h) | JP5 | pins 2 & 3 | | | | | closed | |---+------------------------------+----------+--------------| |>> | IDE I/O Channel Ready normal | JP9 | open | |---+------------------------------+----------+--------------| | | IDE I/O Channel Ready slow | JP9 | closed | +------------------------------------------------------------+ +------------------------------------------------------------+ | SERIAL PORT 1 CONFIGURATION | |------------------------------------------------------------| | COM/Address | JP2 | JP6 | |------------------+--------------------+--------------------| |>> | COM1/378h | pins 1 & 2 closed | pins 1 & 2 closed | |---+--------------+--------------------+--------------------| | | COM3/278h | pins 1 & 2 closed | pins 2 & 3 closed | |---+--------------+--------------------+--------------------| | | Disabled | pins 2 & 3 closed | N/A | +------------------------------------------------------------+ +------------------------------------------------------------+ | SERIAL PORT 1 CONFIGURATION | |------------------------------------------------------------| | COM/Address | JP7 | JP8 | |------------------+--------------------+--------------------| |>> | COM2/2F8h | pins 1 & 2 closed | pins 1 & 2 closed | |---+--------------+--------------------+--------------------| | | COM4/2E8h | pins 1 & 2 closed | pins 2 & 3 closed | |---+--------------+--------------------+--------------------| | | Disabled | pins 2 & 3 closed | N/A | +------------------------------------------------------------+