UNIDENTIFIED
============

   SAI2S13 MULTI I/O PLUS

   +------------------------------------------------------------+
   |------------------------------------------------------------|
   | Data bus:         | 16-bit, ISA                            |
   |-------------------+----------------------------------------|
   | Size:             | Half-length, half-height card          |
   |-------------------+----------------------------------------|
   | Hard drive        | Two IDE (AT) Interface drives          |
   | supported:        |                                        |
   |-------------------+----------------------------------------|
   | Floppy drives     | Two 360KB, 720KB, 1.2MB, or 1.44MB     |
   | supported:        | drives                                 |
   +------------------------------------------------------------+

<gopher://bitreich.org/I/th99/c/U-Z/20463-1.png>
   

   +------------------------------------------------------------+
   |                        CONNECTIONS                         |
   |------------------------------------------------------------|
   |                   Function                    |  Location  |
   |-----------------------------------------------+------------|
   | 25-pin parallel port (LPT1/2) - external      |    CN1     |
   |-----------------------------------------------+------------|
   | 15-pin game port - internal                   |    CN2     |
   |-----------------------------------------------+------------|
   | 10-pin serial port 1 (COM1/3) - external      |    CN3     |
   |-----------------------------------------------+------------|
   | 10-pin serial port 2 (COM2/4) - internal      |    CN4     |
   |-----------------------------------------------+------------|
   | 34-pin control cable connector - floppy drive |    CN5     |
   |-----------------------------------------------+------------|
   | 40-pin IDE (AT) Interface connector           |    CN6     |
   |-----------------------------------------------+------------|
   | 2-pin connector - drive active LED            |    JP1     |
   +------------------------------------------------------------+

   +------------------------------------------------------------+
   |                 USER CONFIGURABLE SETTINGS                 |
   |------------------------------------------------------------|
   |              Function              | Location |  Setting   |
   |------------------------------------+----------+------------|
   |>> | Hard drive enabled             |    J1    | pins 1 & 2 |
   |   |                                |          |   closed   |
   |---+--------------------------------+----------+------------|
   |   | Hard drive disabled            |    J1    | pins 2 & 3 |
   |   |                                |          |   closed   |
   |---+--------------------------------+----------+------------|
   |>> | Floppy drive enabled           |    J2    | pins 1 & 2 |
   |   |                                |          |   closed   |
   |---+--------------------------------+----------+------------|
   |   | Floppy drive disabled          |    J2    | pins 2 & 3 |
   |   |                                |          |   closed   |
   |---+--------------------------------+----------+------------|
   |>> | Serial Port 2 (CN4) enabled    |    J3    | pins 1 & 2 |
   |   |                                |          |   closed   |
   |---+--------------------------------+----------+------------|
   |   | Serial Port 2 (CN4) disabled   |    J3    | pins 2 & 3 |
   |   |                                |          |   closed   |
   |---+--------------------------------+----------+------------|
   |>> | Serial Port 2 (CN4) is set to  |    J4    | pins 1 & 2 |
   |   | COM2                           |          |   closed   |
   |---+--------------------------------+----------+------------|
   |   | Serial Port 2 (CN4) is set to  |    J4    | pins 2 & 3 |
   |   | COM4                           |          |   closed   |
   |---+--------------------------------+----------+------------|
   |>> | Serial Port 1 (CN3) enabled    |    J5    | pins 1 & 2 |
   |   |                                |          |   closed   |
   |---+--------------------------------+----------+------------|
   |   | Serial Port 1 (CN3) disabled   |    J5    | pins 2 & 3 |
   |   |                                |          |   closed   |
   |---+--------------------------------+----------+------------|
   |>> | Serial Port 1 (CN3) is set to  |    J6    | pins 1 & 2 |
   |   | COM1                           |          |   closed   |
   |---+--------------------------------+----------+------------|
   |   | Serial Port 1 (CN3) is set to  |    J6    | pins 2 & 3 |
   |   | COM3                           |          |   closed   |
   |---+--------------------------------+----------+------------|
   |>> | Parallel Port (CN1) enabled    |    J7    | pins 1 & 2 |
   |   |                                |          |   closed   |
   |---+--------------------------------+----------+------------|
   |   | Parallel Port (CN1) disabled   |    J7    | pins 2 & 3 |
   |   |                                |          |   closed   |
   |---+--------------------------------+----------+------------|
   |>> | Parallel Port (CN1) is set to  |    J8    | pins 1 & 2 |
   |   | LPT1                           |          |   closed   |
   |---+--------------------------------+----------+------------|
   |   | Parallel Port (CN1) is set to  |    J8    | pins 2 & 3 |
   |   | LPT2                           |          |   closed   |
   +------------------------------------------------------------+