WESTERN DIGITAL CORPORATION =========================== WDAT-440 +------------------------------------------------------------+ +------------------------------------------------------------+ Data bus: 16-bit, PC/AT Size: Half-length, full-height card Hard drives supported: Two IDE (AT) Interface drives Floppy drives supported: Two 360KB, 720KB, 1.2MB, or 1.44MB Special features: Two serial and one parallel port +------------------------------------------------------------+ | CONNECTIONS | |------------------------------------------------------------| | Function | Location | |-------------------------------------------------+----------| | 34-pin data cable connector-floppy drive | J1 | |-------------------------------------------------+----------| | 25-pin parallel port-external | J2 | |-------------------------------------------------+----------| | 40-pin IDE (AT) Interface control cable | J5 | | connector-internal | | |-------------------------------------------------+----------| | 4 pin connector drive- active LED | J6 | |-------------------------------------------------+----------| | 9-pin serial port-external | J8 | +------------------------------------------------------------+ +------------------------------------------------------------+ | DIRQ14 SIGNAL SELECT | |------------------------------------------------------------| | DIRQ | W3 | W3 | |----------------------------------+------------+------------| |>> | DIRQ14 signal passed to host | pins 1 & 2 | pins 2 & 3 | | | computer | open | closed | |---+------------------------------+------------+------------| | | Conner CP342/CP3022 in true | pins 1 & 2 | pins 2 & 3 | | | IBM AT | closed | open | +------------------------------------------------------------+ WESTERN DIGITAL CORPORATION WDAT-440 +------------------------------------------------------------+ | USER CONFIGURABLE SETTINGS | |------------------------------------------------------------| | Function | Location | Setting | |---------------------------------+-------------+------------| |>> | Floppy controller enabled | W4 | closed | |---+-----------------------------+-------------+------------| | | Floppy controller disabled | W4 | open | |---+-----------------------------+-------------+------------| |>> | Floppy drive port address | W4 | open | | | is 3F0-3F7h | | | |---+-----------------------------+-------------+------------| | | Floppy drive port address | W4 | closed | | | is 370-377h | | | |---+-----------------------------+-------------+------------| |>> | Single speed floppy drive | W5 | open | |---+-----------------------------+-------------+------------| | | Dual speed floppy drive | W5 | closed | |---+-----------------------------+-------------+------------| |>> | Logic ground independent of | W6 | open | | | chassis | | | |---+-----------------------------+-------------+------------| | | Logic ground connected to | W6 | closed | | | chassis | | | |---+-----------------------------+-------------+------------| |>> | Printer Interrupt is IRQ7 | W7 | pins 3 & 4 | | | | | closed | |---+-----------------------------+-------------+------------| | | Printer Interrupt is IRQ5 | W7 | pins 1 & 2 | | | | | closed | |---+-----------------------------+-------------+------------| |>> | COM2 Interrupt is IRQ3 | W7 | pins 5 & 6 | | | | | closed | |---+-----------------------------+-------------+------------| | | COM2 Interrupt is IRQ4 | W7 | pins 5 & 7 | | | | | closed | |---+-----------------------------+-------------+------------| | | COM1 Interrupt is IRQ3 | W7 | pins 6 & 8 | | | | | closed | |---+-----------------------------+-------------+------------| | | COM1 Interrupt is IRQ4 | W7 | pins 7 & 8 | | | | | closed | |---+-----------------------------+-------------+------------| |>> | Printer enabled | W8/jumper 1 | closed | |---+-----------------------------+-------------+------------| | | Printer disabled | W8/jumper 1 | open | |---+-----------------------------+-------------+------------| |>> | Printer address, LPT1 = | W8/jumper 2 | open | | | 378-37Fh | | | |---+-----------------------------+-------------+------------| | | Printer address, LPT2 = | W8/jumper 2 | closed | | | 278-27Fh | | | |---+-----------------------------+-------------+------------| |>> | External Serial Port = COM1 | W8/jumper 3 | closed | | | (3F8-3FFh) | | | |---+-----------------------------+-------------+------------| | | External Serial Port = COM3 | W8/jumper 4 | closed | | | (3E8-3EFh) | | | |---+-----------------------------+-------------+------------| |>> | Internal Serial Port = COM2 | W8/jumper 5 | closed | | | (2F8-2FFh) | | | |---+-----------------------------+-------------+------------| | | Internal Serial Port = COM4 | W8/jumper 6 | closed | | | (2E8-2EFh) | | | |---+-----------------------------+-------------+------------| |>> | Enable intelligent drive | W9 | closed | | | interface | | | |---+-----------------------------+-------------+------------| | | Disable intelligent drive | W9 | open | | | interface | | | +------------------------------------------------------------+