TYAN COMPUTER CORPORATION ========================= S1372 (REV. 1.0) +------------------------------------------------------------+ |------------------------------------------------------------| | Data bus: | 16-bit, ISA | |---------------+--------------------------------------------| | Size: | Half-length, half-height card | |---------------+--------------------------------------------| | Hard drive | Two IDE (AT) interface drives | | supported: | | |---------------+--------------------------------------------| | Floppy drives | Two 360KB, 720KB, 1.2MB, 1.44MB, or 2.88MB | | supported: | drives | +------------------------------------------------------------+ +------------------------------------------------------------+ | CONNECTIONS | |------------------------------------------------------------| | Function | Location | |-----------------------------------------------+------------| | 25-pin parallel port | CN1 | |-----------------------------------------------+------------| | 10-pin serial port 2 - internal | CN2 | |-----------------------------------------------+------------| | 9-pin serial port 1 - external | CN3 | |-----------------------------------------------+------------| | Game port | CN4 | |-----------------------------------------------+------------| | 40-pin IDE (AT) Interface connector | CN5 | |-----------------------------------------------+------------| | 34-pin control cable connector - floppy drive | CN6 | |-----------------------------------------------+------------| | 4-pin connector - drive active LED | CN7 | |-----------------------------------------------+------------| | 14-pin connector - Custom IRQ Header | CN8 | +------------------------------------------------------------+ +------------------------------------------------------------+ | USER CONFIGURABLE SETTINGS | |------------------------------------------------------------| | Function | Location | Setting | |------------------------------------+----------+------------| |>> | Game port enabled | J6 | closed | |---+--------------------------------+----------+------------| | | Game port disabled | J6 | open | |---+--------------------------------+----------+------------| |>> | IDE IRQ14 enabled | J22 | pins 2 & 3 | | | | | closed | |---+--------------------------------+----------+------------| | | IDE IRQ15 enabled | J22 | pins 1 & 2 | | | | | closed | |---+--------------------------------+----------+------------| |>> | Factory configured - do not | J50 | n/a | | | alter | | | +------------------------------------------------------------+ +------------------------------------------------------------+ | SERIAL PORT 1 CONFIGURATION | |------------------------------------------------------------| | COM/Address | J14 | J15 | |------------------+--------------------+--------------------| |>> | COM1/3F8h | pins 2 & 3 closed | pins 2 & 3 closed | |---+--------------+--------------------+--------------------| | | COM2/2F8h | pins 2 & 3 closed | pins 1 & 2 closed | +------------------------------------------------------------+ +------------------------------------------------------------+ | SERIAL PORT 1 CONFIGURATION | |------------------------------------------------------------| | COM/Address | J14 | J15 | |------------------+--------------------+--------------------| | COM3/3E8h | pins 1 & 2 closed | pins 2 & 3 closed | |------------------+--------------------+--------------------| | Disabled | pins 1 & 2 closed | pins 1 & 2 closed | +------------------------------------------------------------+ +------------------------------------------------------------+ | SERIAL PORT 2 CONFIGURATION | |------------------------------------------------------------| | COM/Address | J16 | J17 | |------------------+--------------------+--------------------| |>> | COM2/2F8h | pins 2 & 3 closed | pins 2 & 3 closed | |---+--------------+--------------------+--------------------| | | COM1/3F8h | pins 2 & 3 closed | pins 1 & 2 closed | |---+--------------+--------------------+--------------------| | | COM4/2E8h | pins 1 & 2 closed | pins 2 & 3 closed | |---+--------------+--------------------+--------------------| | | Disabled | pins 1 & 2 closed | pins 1 & 2 closed | +------------------------------------------------------------+ +------------------------------------------------------------+ | SERIAL PORTS 1 & 2 INTERRUPT SELECT | |------------------------------------------------------------| | Port 1 | Port 2 | J1 | J2 | J3 | J4 | |--------------+----------+--------+---------+--------+------| |>> | IRQ4 | IRQ3 | open | closed | closed | open | |---+----------+----------+--------+---------+--------+------| | | IRQ4 | Disabled | open | closed | open | open | |---+----------+----------+--------+---------+--------+------| | | Disabled | IRQ3 | open | open | closed | open | |---+----------+----------+--------+---------+--------+------| | | IRQ3 | IRQ4 | open | J2 pin | Open | | | | | | | 1 to J3 | | | | | | | | pin 1 | | | | | | | | closed, | | | | | | | | and | | | | | | | | | | | | | | | | J2 pin | | | | | | | | 2 to J3 | | | | | | | | pin 2 | | | | | | | | closed | | | |---+----------+----------+--------+---------+--------| | | | IRQ3 | Disabled | open | J2 pin | Open | | | | | | | 1 to J3 | | | | | | | | pin 1 | | | | | | | | closed | | | |---+----------+----------+--------+---------+--------| | | | Disabled | IRQ4 | open | J2 pin | Open | | | | | | | 2 to J3 | | | | | | | | pin 2 | | | | | | | | closed | | | |---+----------+----------+--------+---------+--------| | | | IRQ5 | IRQ3 | open | closed | J3 pin | | | | | | | | 2 to | | | | | | | | J4 pin | | | | | | | | 2 | | | | | | | | closed | | |---+----------+----------+--------+---------+--------| | | | IRQ5 | Disabled | open | open | J3 pin | | | | | | | | 2 to | | | | | | | | J4 pin | | | | | | | | 2 | | | | | | | | closed | | |---+----------+----------+--------+---------+--------| | | | IRQ4 | IRQ5 | J1 pin | closed | open | | | | | | 2 to | | | | | | | | J2 pin | | | | | | | | 2 | | | | | | | | closed | | | | |---+----------+----------+--------+---------+--------| | | | Disabled | IRQ5 | J1 pin | open | open | | | | | | 2 to | | | | | | | | J2 pin | | | | | | | | 2 | | | | | | | | closed | | | | +------------------------------------------------------------+ +------------------------------------------------------------+ | PARALLEL PORT CONFIGURATION | |------------------------------------------------------------| | LPT/Address | J18 | J19 | |------------------+--------------------+--------------------| |>> | LPT1/378h | pins 2 & 3 closed | pins 2 & 3 closed | |---+--------------+--------------------+--------------------| | | LPT2/278h | pins 2 & 3 closed | pins 1 & 2 closed | |---+--------------+--------------------+--------------------| | | LPT3/3BCh | pins 1 & 2 closed | pins 1 & 2 closed | |---+--------------+--------------------+--------------------| | | Disabled | pins 1 & 2 closed | pins 2 & 3 closed | +------------------------------------------------------------+ +------------------------------------------------------------+ | PARALLEL PORT INTERRUPT SELECT | |------------------------------------------------------------| | IRQ | J4 | J5 | |------------------------+-----------------+-----------------| |>> | IRQ7 | open | closed | |---+--------------------+-----------------+-----------------| | | IRQ5 | closed | open | |---+--------------------+-----------------+-----------------| | | Disabled | open | open | +------------------------------------------------------------+ +------------------------------------------------------------+ | ADVANCED PARALLEL PORT FUNCTIONS | |------------------------------------------------------------| | Setting | J23 | J24 | |--------------------------------+-------------+-------------| |>> | Standard PRN mode only | pins 2 & 3 | pins 2 & 3 | | | enabled | closed | closed | |----+---------------------------+-------------+-------------| | | ECP, EPP and PRN modes | pins 1 & 2 | pins 1 & 2 | | | enabled | closed | closed | |----+---------------------------+-------------+-------------| | | EPP and PRN modes enabled | pins 1 & 2 | pins 2 & 3 | | | | closed | closed | |----+---------------------------+-------------+-------------| | | ECP and PRN modes enabled | pins 2 & 3 | pins 1 & 2 | | | | closed | closed | |------------------------------------------------------------| | Note:ECP = Extended Capabilities Mode, EPP = Enhanced | | Parallel Port. | +------------------------------------------------------------+ +------------------------------------------------------------+ | EXTENDED CAPABILITIES PORT (ECP) DMA SELECT | |------------------------------------------------------------| | DMA | J7 | J8 | J9 | J10 | J11 | |--------------+--------+---------+--------+--------+--------| |>> | Disabled | open | open | open | open | open | |---+----------+--------+---------+--------+--------+--------| | | DMA1 | closed | open | open | closed | closed | |---+----------+--------+---------+--------+--------+--------| | | DMA3 | closed | closed | closed | open | open | |------------------------------------------------------------| | Note:DMA3 is the preferred setting when the ECP mode is | | enabled. | +------------------------------------------------------------+ +------------------------------------------------------------+ | FLOPPY DRIVE CONFIGURATION | |------------------------------------------------------------| | Address | J12 | J13 | |------------------+--------------------+--------------------| |>> | 3F0h | pins 2 & 3 closed | pins 1 & 2 closed | |---+--------------+--------------------+--------------------| | | 370h | pins 1 & 2 closed | pins 1 & 2 closed | |---+--------------+--------------------+--------------------| | | Disabled | N/A | pins 2 & 3 closed | +------------------------------------------------------------+ +------------------------------------------------------------+ | IDE PORT CONFIGURATION | |------------------------------------------------------------| | Address | J20 | J21 | |------------------+--------------------+--------------------| |>> | 1F0h | pins 2 & 3 closed | pins 2 & 3 closed | |---+--------------+--------------------+--------------------| | | 170h | pins 1 & 2 closed | pins 2 & 3 closed | |---+--------------+--------------------+--------------------| | | Disabled | N/A | pins 1 & 2 closed | +------------------------------------------------------------+ +------------------------------------------------------------+ | MISCELLANEOUS TECHNICAL NOTES | |------------------------------------------------------------| | CN8 is used to configure the card to comply with the PCI | | IDE Legacy convention. A special cable is required to | | connect to applicable hard drives. | +------------------------------------------------------------+