TYAN COMPUTER CORPORATION ========================= VL IDE & I/O CONTROLLER +------------------------------------------------------------+ |------------------------------------------------------------| | Data bus: | 32-bit, VL-bus | |-------------------+----------------------------------------| | Size: | Three/quarter-length, full-height card | |-------------------+----------------------------------------| | Hard drive | Two IDE (AT) Interface drives | | supported: | | |-------------------+----------------------------------------| | Floppy drives | Two 360KB, 720KB, 1.2MB, or 1.44MB | | supported: | drives | +------------------------------------------------------------+ +------------------------------------------------------------+ | CONNECTIONS | |------------------------------------------------------------| | Function | Location | |-----------------------------------------------+------------| | 10-pin serial port (COM1/3/4) - external | CN1 | |-----------------------------------------------+------------| | 25-pin parallel port (LPT1/2/3) - external | CN2 | |-----------------------------------------------+------------| | 40-pin IDE(AT) Interface connector | JP4 | |-----------------------------------------------+------------| | 34-pin control cable connector - floppy drive | JP6 | |-----------------------------------------------+------------| | 10-pin serial port (COM2/3/4) - internal | JP8 | |-----------------------------------------------+------------| | 15-pin game port - internal | JP9 | |-----------------------------------------------+------------| | 4-pin connector - Drive active LED | JP20 | +------------------------------------------------------------+ +------------------------------------------------------------+ | USER CONFIGURABLE SETTINGS | |------------------------------------------------------------| | Function | Location | Setting | |------------------------------------+----------+------------| |>> | Floppy drive enabled | J1 | pins 2 & 3 | | | | | closed | |---+--------------------------------+----------+------------| | | Floppy drive disabled | J1 | pins 1 & 2 | | | | | closed | |---+--------------------------------+----------+------------| |>> | Hard drive port address is | J2 | pins 2 & 3 | | | 1F0-1F7h | | closed | |---+--------------------------------+----------+------------| | | Hard drive port address is | J2 | pins 1 & 2 | | | 170-177h | | closed | |---+--------------------------------+----------+------------| |>> | Floppy drive booting sequence | J3 | pins 2 & 3 | | | is A:/B: | | closed | |---+--------------------------------+----------+------------| | | Floppy drive booting sequence | J3 | pins 1 & 2 | | | is B:/A: | | closed | |---+--------------------------------+----------+------------| |>> | Hard drive enabled | J4 | pins 2 & 3 | | | | | closed | |---+--------------------------------+----------+------------| | | Hard drive disabled | J4 | pins 1 & 2 | | | | | closed | |---+--------------------------------+----------+------------| |>> | Hard drive port address is | J5 | pins 2 & 3 | | | 1F0-1F7, 3F0-3F7h | | closed | |---+--------------------------------+----------+------------| | | Hard drive port address is | J5 | pins 1 & 2 | | | 170-177, 370-377h | | closed | +------------------------------------------------------------+ +------------------------------------------------------------+ | USER CONFIGURABLE SETTINGS | |------------------------------------------------------------| | Function | Location | Setting | |------------------------------------+----------+------------| |>> | Game Port (CN6) enabled | J12 | pins 2 & 3 | | | | | closed | |---+--------------------------------+----------+------------| | | Game Port (CN6) disabled | J12 | pins 1 & 2 | | | | | closed | |---+--------------------------------+----------+------------| |>> | Local bus clock speed 33 MHz | J16 | pins 2 & 3 | | | or 50 MHz | | closed | |---+--------------------------------+----------+------------| | | Local bus clock speed 25 MHz | J16 | pins 1 & 2 | | | or 40 MHz | | closed | |---+--------------------------------+----------+------------| |>> | Single hard drive supported | JP5 | closed | |---+--------------------------------+----------+------------| | | Two hard drives supported | JP5 | open | |---+--------------------------------+----------+------------| |>> | Parallel port is | JP7 | closed | | | bi-directional | | | |---+--------------------------------+----------+------------| | | Parallel port is | JP7 | open | | | uni-directional | | | |---+--------------------------------+----------+------------| |>> | Hard drive Interrupt IRQ14 | JP10 | closed | | | enabled | | | |---+--------------------------------+----------+------------| | | Hard drive Interrupt IRQ14 | JP10 | open | | | disabled | | | |---+--------------------------------+----------+------------| |>> | Serial Port 2 (JP8) Interrupt | JP11 | closed | | | IRQ3 enabled | | | |---+--------------------------------+----------+------------| | | Serial Port 2 (JP8) Interrupt | JP11 | open | | | IRQ3 disabled | | | |---+--------------------------------+----------+------------| |>> | Serial Port 1 (CN1) Interrupt | JP12 | closed | | | IRQ4 enabled | | | |---+--------------------------------+----------+------------| | | Serial Port 1 (CN1) Interrupt | JP12 | open | | | IRQ4 disabled | | | |---+--------------------------------+----------+------------| |>> | Floppy drive Interrupt IRQ6 | JP13 | closed | | | enabled | | | |---+--------------------------------+----------+------------| | | Floppy drive Interrupt IRQ6 | JP13 | open | | | disabled | | | +------------------------------------------------------------+ +------------------------------------------------------------+ | PARALLEL PORT (CN2) CONFIGURATION | |------------------------------------------------------------| | LPT | J6 | J7 | |---------------------+-------------------+------------------| |>> | LPT1 (378-37Fh) | pins 2 & 3 closed | pins 2 & 3 | | | | | closed | |---+-----------------+-------------------+------------------| | | LPT2 (278-27Fh) | pins 1 & 2 closed | pins 1 & 2 | | | | | closed | |---+-----------------+-------------------+------------------| | | LPT3 (3BC-3BEh) | pins 2 & 3 closed | pins 1 & 2 | | | | | closed | |---+-----------------+-------------------+------------------| | | Disabled | pins 1 & 2 closed | pins 2 & 3 | | | | | closed | +------------------------------------------------------------+ +------------------------------------------------------------+ | SERIAL PORT 1 (CN1) CONFIGURATION | |------------------------------------------------------------| | COM | J8 | J9 | |---------------------+-------------------+------------------| |>> | COM1 (3F8-3FFh) | pins 2 & 3 closed | pins 2 & 3 | | | | | closed | |---+-----------------+-------------------+------------------| | | COM3 (3E8-3EFh) | pins 1 & 2 closed | pins 1 & 2 | | | | | closed | |---+-----------------+-------------------+------------------| | | COM4 (2E8-2EFh) | pins 2 & 3 closed | pins 1 & 2 | | | | | closed | |---+-----------------+-------------------+------------------| | | Disabled | pins 1 & 2 closed | pins 2 & 3 | | | | | closed | +------------------------------------------------------------+ +------------------------------------------------------------+ | SERIAL PORT 2 (JP8) CONFIGURATION | |------------------------------------------------------------| | COM | J10 | J11 | |---------------------+-------------------+------------------| |>> | COM2 (2F8-2FFh) | pins 2 & 3 closed | pins 2 & 3 | | | | | closed | |---+-----------------+-------------------+------------------| | | COM3 (3E8-3EFh) | pins 2 & 3 closed | pins 1 & 2 | | | | | closed | |---+-----------------+-------------------+------------------| | | COM4 (2E8-2EFh) | pins 1 & 2 closed | pins 1 & 2 | | | | | closed | |---+-----------------+-------------------+------------------| | | Disabled | pins 1 & 2 closed | pins 2 & 3 | | | | | closed | +------------------------------------------------------------+ +------------------------------------------------------------+ | HARD DRIVE TIMING OPTION | |------------------------------------------------------------| | Function | J15 | JP17 | |------------------------+--------------------+--------------| |>> | VESA mode enabled | pins 2 & 3 closed | open | |---+--------------------+--------------------+--------------| | | ISA mode enabled | pins 1 & 2 closed | closed | +------------------------------------------------------------+ +------------------------------------------------------------+ | PARALLEL PORT (CN2) INTERRUPT REQUEST | |------------------------------------------------------------| | IRQ | JP14 | JP15 | |-------------------------+-----------------+----------------| | | 5 | closed | open | |-----+-------------------+-----------------+----------------| | | 7 | open | closed | |-----+-------------------+-----------------+----------------| |>> | Disabled | open | open | +------------------------------------------------------------+ +------------------------------------------------------------+ | MISCELLANEOUS TECHNICAL NOTES | |------------------------------------------------------------| | Jumpers JP16 & JP18 are not used. | +------------------------------------------------------------+