SEAGATE TECHNOLOGY, INC.
========================

   ST10

   Data bus: 8-bit, ISA

   Size: Half-length, full-height card

   Hard drives supported:  Two MFM ST506/ST412 drives

   Floppy drives supported: None

<gopher://bitreich.org/I/th99/c/S-T/20195-1.png>
   

   +------------------------------------------------------------+
   |                        CONNECTIONS                         |
   |------------------------------------------------------------|
   |                 Function                  |    Location    |
   |-------------------------------------------+----------------|
   | 20-pin data cable connector-drive 0       |       J1       |
   |-------------------------------------------+----------------|
   | 20-pin data cable connector-drive 1       |       J2       |
   |-------------------------------------------+----------------|
   | 34-pin control cable connector-hard drive |       J3       |
   +------------------------------------------------------------+

   +------------------------------------------------------------+
   |                        BIOS ADDRESS                        |
   |------------------------------------------------------------|
   |  Address   |  Jumper JP2A  |  Jumper JP2B  |  Jumper JP2C  |
   |------------+---------------+---------------+---------------|
   |   C8000h   |    closed     |     open      |     open      |
   |------------+---------------+---------------+---------------|
   |   D0000h   |    closed     |     open      |    closed     |
   |------------+---------------+---------------+---------------|
   |   D8000h   |    closed     |    closed     |     open      |
   |------------+---------------+---------------+---------------|
   |   F4000h   |    closed     |    closed     |    closed     |
   |------------+---------------+---------------+---------------|
   |  Disabled  |     open      |     open      |     open      |
   +------------------------------------------------------------+

   +------------------------------------------------------------+
   |               MISCELLANEOUS TECHNICAL NOTES                |
   |------------------------------------------------------------|
   |  This controller has a built-in low-level format program.  |
   |                                                            |
   |  To enter the program run the DEBUG utility supplied with  |
   |           DOS and at the prompt enter: G=C800:5.           |
   +------------------------------------------------------------+